Page 1
01 /
Charge the
Battery
02 /
Insert the
Battery
03 /
Set Up Hub
and Camera
04 /
Installation
Options
05 /
Mount
to the Wall
Quick Start Guide
Smart Wire-Free Security
Camera System
©2022 TP-Link 7106509614 REV1.0.0
*Images may dier from your actual product.
Method 1: Battery
5V USB Charger
Charging:
Fully charged:
Method 2: Battery Inside Camera
*Check the battery status in the Tapo app after setup.
Note:
1. Charge the battery before use. It will take about 5~6 hours.
2. If you want to use the camera while charging the battery, we
recommend purchasing another battery for your convenience.
Solid amber
Solid green
5V USB Charger
1. Twist anti-clockwise and then pull to remove the
cover of the camera. Insert the battery.
/
SYNC
RES
ET
2. Align the indicator line on the cover with the
arrow icon on the camera body.
Press and rotate clockwise to the lock position
to replace the cover.
2
1
Open
Closed
1. Get the Tapo app from the App Store or Google
Play.
OR
2. Follow the instructions in the Tapo app to set up
your hub.
3. Follow the instructions in the Tapo app to set up
your camera.
Install
Option 2. Mount to the Wall
Install
Rotate after installing
Rotate to secure
the bracket
Rotate after installing
Rotate to secure
the bracket
1. Drill HolesOption 1. Set on a Table
Stick the mounting template
to the desired mounting
place. Drill 3 holes according
to the template.
2. Install the Bracket
Insert three anchors into
the holes and use the
screws to ax the bracket
over the anchors.
3. Install the Camera
Install the camera on the
mounting bracket, and
adjust the camera angle.
Page 2
Camera Appearance Hub Appearance Light Indications
Front Back
6
1
1
Spotlights
2
Light Sensor
3
Motion Sensor
42 5
3
4
Status LED
Indicate the status of your camera. While the camera is powered on:
5
Microphone
6
Lens
1
7
/
SYNC
RES
ET
SYNC/RESET Button
7
Press for 1 second: Pair with the hub
Press and hold for about 5 seconds: Reset the camera
4
Micro SD
1 2 3
1
SYNC Button
Press to pair with the camera, or silence the hub when it rings.
2
RESET
Use a pin to press and hold for about 5 seconds until the hub
LED quickly blinks red to reset the hub.
3
microSD Card Slot
Insert a microSD card to record camera videos locally.
Initialize the microSD card within the Tapo app rst.
▲
microSD card not included.
4
Status LED
Indicate the status of your hub.
Hub Status LED
Solid red
Blinking red and green Ready for setup
Solid amber
Solid green
Blinking green slowly Pairing
Blinking red quickly
Blinking green quickly
Starting up
Connected to router
Connected to the cloud
Hub resetting
Hub updating
Camera Status LED
Solid Red
Blinking red and green
Blinking green slowly
Solid amber Connected to the hub
Solid green Connected to the cloud
Blinking red quickly Camera resetting
Blinking green quickly Camera updating
Blinking red once a minute
Blinking red slowly
Starting up
Ready for pairing
Pairing
Low battery
Oine
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions, please
don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger of
electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical care.
Consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids to determine if they are adequality
shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• Product should be kept away from heat sources such as radiators,
cookers etc. - it should not be placed in places where the temperature
is less than -20 degrees or greater than 45 degrees.
• This product may interfere with other electronic products such as TV,
radios, personal computers, phones or other wireless devices.
CAUTION!
Risk of re or explosion
if the battery is replaced by an incorrect type
Avoid replacement of a battery with an incorrect type that can
defeat a safeguard.
Avoid disposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery, that can result in
an explosion.
Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of ammable liquid or gas; Do not leave a battery
subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Camera Operating Temperature: -20 °C ~ 45°C (-4°F ~ 113°F)
Camera Operating Humidity: 10%~90%RH, Non-condensing
Hub Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)
Hub Operating Humidity: 10%~90%RH, Non-condensing
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
For technical support, user guides,
FAQs, warranty and more, please visit
www.tapo.com/support/
Loading...