TP-Link T1600G-52TS User manual
Business Networking Solution
Installation Guide
Jetstream Smart Switch
About this Installation Guide
This Installation Guide describes the hardware characteristics, installation methods and the
points that should be attended to during the installation. This Installation Guide is structured as
follows:
Chapter 1 Introduction
This chapter describes the external components of the switch.
Chapter 2 Installation
This chapter illustrates how to install the switch.
Chapter 3 Connection
This chapter illustrates how to do the physical connection of the switch.
Appendix A Troubleshooting
Appendix B Hardware Specifications
Audience
This Installation Guide is for:
Network Engineer Network Administrator
Conventions
• Some models featured in this guide may be unavailable in your country or region. For local sales
information, visit https://www.tp-link.com.
• The figures in Chapter 2 and Chapter 3 are for demonstration purposes only. Your switch may
differ in appearance from that depicted.
• PoE budget calculations are based on laboratory testing. Actual PoE power budget is not
guaranteed and will vary as a result of client limitations and environmental factors.
• This guide uses the specific formats to highlight special messages. The following table lists the
notice icons that are used throughout this guide.
Remind to be careful. A caution indicates a potential which may result in device damage.
Remind to take notice. The note contains the helpful information for a better use of the
product.
Related Document
The User Guide and CLI Reference Guide of the product are provided on the resource CD. To
obtain the latest product information, visit the official website: https://www.tp-link.com.
Contents
Chapter 1 Introduction ——————————— 01
1.1 Product Overview ...........................................................01
1.2 Appearance .......................................................................01
Chapter 2 Installation ——————————— 08
2.1 Package Contents ..........................................................08
2.2 Safety Precautions .........................................................08
2.3 Installation Tools ..............................................................10
2.4 Product Installation ........................................................10
Chapter 3 Connection ——————————— 12
3.1 Ethernet Port ....................................................................12
3.2 SFP/SFP+ Port ..................................................................12
3.3 Verify Installation .............................................................12
3.4 Power On ............................................................................12
3.5 Initialization ........................................................................13
3.6 SoftwareConguration ................................................13
Appendix A Troubleshooting ———————— 14
AppendixBSpecications ————————— 15
JetStream Smart Switch
Chapter 1 Introduction
1.1 Product Overview
Designed for workgroups and departments, TP-Link JetStream Smart Switch provides wire-speed
performance and abundant L2 management features. It provides a variety of service features and
multiple powerful functions with high security.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions for
a variable scale of networks. QoS and IGMP snooping/filtering optimize voice and video application.
Link aggregation increases aggregated bandwidth, optimizing the transport of business critical
data. SNMP, RMON, WEB and CLI Login bring abundant management policies. TP-Link Gigabit Smart
Switch integrates multiple functions with excellent performance, and is friendly to manage, which
can fully meet the need of the users demanding higher net working performance.
T1600G-52PS (TL-SG2452P)/TL-SG2210MP/TL-SG2428P/TL-SL2428P is also a Power Sourcing
Equipment (PSE*). Some of the RJ45 ports on the switch support Power over Ethernet (PoE*)
function, which can automatically detect and supply power to those powered devices (PDs*)
complying with IEEE 802.3af and IEEE 802.3at.
*PSE: a device (switch or hub for instance) that provides power through an Ethernet cable.
*PoE: a technology describes a system to transmit electrical power, along with data, to remote
devices over standard twisted-pair cable in an Ethernet.
*PD: a device powered by a PSE and thus consumes energy. Examples include powering network
cameras, wireless LAN access points, IP telephones, network hubs, embedded computers etc.
1.2 Appearance
■
Front Panel
The front panel of T1500-28TC (TL-SL2428) is shown as the following figure.
Figu re 1-1 Front Panel of T1500-28TC (TL-SL2428)
LEDs Reset SFP Port10/100 Mbps RJ45
Port
The front panel of T1600G-18TS (TL-SG2216) is shown as the following figure.
Figu re 1-2 Front Panel of T160 0G-18TS (TL-SG2216)
LEDs Reset 10/100/1000 Mbps RJ45 Port SFP Port
10/100/1000 Mbps
RJ45 Port
01 Introduction
JetStream Smart Switch
Reset LEDs 10/100/1000 Mbps RJ45 Port SFP Port
Button
The front panel of T1600G-28TS is shown as the following figure.
Figu re 1-3 Front Panel of T160 0G-28TS
10/100/1000 Mbps RJ45 PortLEDs Reset SFP Port
The front panel of T1600G-52TS (TL-SG2452) is shown as the following figure.
Figu re 1-4 Front Panel of T160 0G-52TS (TL-SG2452)
T1600G-52TS
Smart Switch
PWR
Reset
SYS
The front panel of T1600G-52PS (TL-SG2452P) is shown as the following figure.
Figu re 1-5 Front Panel of T160 0G-52PS (TL-SG2452P)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
PWR
PoE Max
SYS
FAN
T1600G-52PS
Speed
PoE
Smart PoE Switch
Reset
Reset LED Mode Switch
LEDs 10/100/1000 Mbps RJ45 Port SFP Port
activity1000Mbps 10/100Mbps
Fault
Delivering Power Over Budget
PoE
Speed
F
F
The front panel of T1700G-28TQ is shown as the following figure.
Figu re 1-6 Front Panel of T1700G-28TQ
LEDs Unit ID LED Reset 10/100/1000 Mbps RJ45 Port SFP+ Port
The front panel of T1700X-16TS is shown as the following figure.
Figu re 1-7 Front Panel of T1700X-16TS
ResetLEDs 100 M/1000 M/10 Gbps
RJ45 Port
1 G/10 Gbps SFP+ PortLEDs Indication
02Introduction
JetStream Smart Switch
RJ45 Port
Port and PoE Port
Switch Button
The front panel of TL-SG2210MP is shown as the following figure.
Figu re 1-8 Front Panel of T L-SG2210MP
TL-SG2210MP
8-Port Gigabit Smart PoE+ Switch with 2 SFP Slots
LEDs
LED Mode
Switch Button
Reset 10/100/1000 Mbps
RJ45 Port and PoE Port
SFP Port
The front panel of TL-SG2428P is shown as the following figure.
Figu re 1-9 Front Panel of T L-SG2428P
TL-SG2428P
24-Port Gigabit Smart PoE+ Switch with 4 SFP Slots
LEDs Reset 10/100/1000 Mbps
Switch Button
RJ45 Port
SFP PortLED Mode
The front panel of TL-SL2428P is shown as the following figure.
Figu re 1-10 Front Pane l of TL-SL2428P
LEDs Reset SFP Port10/100/1000 Mbps
LED Mode
10/100 Mbps RJ45
LEDs
For T1500-28TC (TL-SL2428)/T1600G-18TS (TL-SG2216)/T1600G-28TS/T1600G-52TS
(TG-SG2452)/T1700G-28TQ/T1700X-16TS
LED Indication
On: The switch is powered on.
PWR
SYS
10/10 0M
Link/Act
Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
Flashing: The switch works properly.
On or Off: The switch works improperly.
On: A device is connected to the corresponding port but no activity.
Flashing: Data is being transmitted or received.
Off: No device is connected to the corresponding por t.
Note: 10/100M for T1500-28TC. Link /Act for T1600G-18TS (TL-SG2216)/T1700G28TQ.
03 Introduction
Loading...