Tp-link Archer T9E User Manual [ru]

Rev: 1.1.0

1910011548

Archer T6E

AC1300 Wireless Dual Band PCI Express Adapter

Archer T8E

AC1750 Wireless Dual Band PCI Express Adapter

Archer T9E

AC1900 Wireless Dual Band PCI Express Adapter

Specifications are subject to change without notice. TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.

http://www.tp-link.com

is a registered trademark of

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1） This device may not cause harmful interference.

2） This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in hand. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance.

only for purposes of gathering telemetry information for

d to use SRD for other purposes for outdoor

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

RF Exposure Information

This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62209-2. SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5 cm away from your body to ensure exposure levels remain at or below the as-tested levels.

National Restrictions

This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

Country Restriction Reason/remark

Belarus Not implemented

Norway Implemented This subsection does not apply for the geographical area

within a radius of 20 km from the centre of Ny-Ålesund on

Svalbard.

Italy Implemented The public use is subject to general authorisation by the

respective service provider.

Russian

Federation

Limited

implementation

1. SRD with FHSS modulation

1.1. Maximum 2.5 mW e.i.r.p.

1.2. Maximum 100 mW e.i.r.p. Permitted for use SRD for

outdoor applications without restriction on installation height

automated monitoring and resources accounting systems.

Permitte

applications only when the installation height is not exceeding

10 m above the ground surface.

1.3.Maximum 100 mW e.i.r.p. Indoor applications.

2. SRD with DSSS and other than FHSS wideband

100 mW e.i.r.p. It is permitted to use SRD for outdoor

applications only for purposes of gathering telemetry

monitoring and resources

modulation

2.1. Maximum mean e.i.r.p. density is 2 mW/MHz. Maximum

100 mW e.i.r.p.

2.2. Maximum mean e.i.r.p. density is 20 mW/MHz. Maximum

information for automated

accounting systems or security systems.

2.3. Maximum mean e.i.r.p. density is 10 mW/MHz. Maximum

100 mW e.i.r.p. Indoor applications.

Ukraine Limited

implementation

e.i.r.p. ≤100 mW with built-in antenna with amplification factor

up to 6 dBi.

ATTENTION: Due to EU law, the country settings must be identical to the country where the device is operating (important due to non-harmonised frequencies in the EU).

Restricted to indoor use.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1） This device may not cause interference, and

2） This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

3） l’appareil ne doit pas produire de brouillage;

4） l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le

brouillage est susceptible d’en compromettre le fonctionnement.

This radio transmitter (IC: 8853A-T8E Model: Archer T8E, IC: 8853A-T9E Model: Archer T9E, IC: 8853A-T6E Model: Archer T6E) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list (Appendix A), having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Le présent émetteur radio (IC: 8853A-T8E Model: Archer T8E, IC: 8853A-T9E Model: Archer T9E, IC: 8853A-T6E Model: Archer T6E) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste (Annexe A), et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Caution:

1) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

3) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

The high-power MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

radars are allocated as primary users (i.e. priority users) of the bands 5250-5350

Avertissement:

1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

2) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limitation P.I.R.E.;

3) Le gain maximal d'antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas.

En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

Les produits utilisant la technique d'atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

於

區域內操作之無線設備的警告聲明

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意！

依據低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻

加大功率或變更原設計之特性或功能。

率、

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。

減少電磁波影響，請妥適使用。

5.25GHz至5.35GHz

工作頻率 5.250~5.350GHz 該頻段限於室內使用。

BSMI Notice

安全諮詢及注意事項

 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

 注意防潮，請勿將水或其他液體潑灑到本產品上。

 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。

 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。

 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам

нормативних документів та вимогам, що передбачені чинними законодавчими актами України.

Safety Information

equipment (WEEE). This means that this product must be handled pursuant to

European directive 2012/19/EU in order to be recycled or dismantled to minimize

 When product has power button, the power button is one of the way to shut off the product;

when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.

 Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock

and voiding the limited warranty. If you need service, please contact us.

 Avoid water and wet locations.

This product can be used in the following countries:

AT BG BY CA CZ DE DK EE

ES FI FR GB GR HU IE IT

LT LV MT NL NO PL PT RO

RU SE SG SK TR UA US

Explanation of the symbols on the product label

Symbol Explanation

DC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic

its impact on the environment.

User has the choice to give his product to a competent recycling organization or to

the retailer when he buys a new electrical or electronic equipment.

TP-LINK TECHNOLOGIES CO., LTD

DECLARATION OF CONFORMITY

For the following equipment:

Product Description: AC1300/1750/AC1900 Wireless Dual Band PCI Express Adapter

Model No.: Archer T6E/Archer T8E/Archer T9E

Trademark: TP-LINK

We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU

The above product is in conformity with the following standards or other normative documents

EN 300 328 V1.8.1

EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1

EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 +A2: 2013

EN 62311: 2008

EN 301 893 V1.7.1

EN 50581: 2012

The product carries the CE Mark:

Person responsible for making this declaration:

Yang Hongliang Product Manager of International Business

Date of issue: 2015-12-11

TP-LINK TECHNOLOGIES CO., LTD.

Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park,

Shennan Rd, Nanshan, Shenzhen, China

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

CONTENTS

Package Contents .................................................................................................... 1

Chapter 1 Product Overview ................................................................................. 2

1.1 Introduction ................................................................................................................ 2

1.2 Features ..................................................................................................................... 2

1.3 Conventions ............................................................................................................... 2

1.4 LED Status ................................................................................................................. 3

Chapter 2 Installation ............................................................................................. 4

2.1 Hardware Installation ................................................................................................. 4

2.2 Software Installation .................................................................................................. 4

Chapter 3 Connect to a Wireless Network ......................................................... 10

3.1 To connect using TWCU ......................................................................................... 10

3.2 To connect using WPS ............................................................................................ 14

3.2.1 PBC (Push Button Configuration) method ................................................. 14

3.2.2 PIN method ................................................................................................. 16

3.3 To connect using Windows built-in wireless utility .................................................. 19

3.3.1 In Windows XP ........................................................................................... 19

3.3.2 In Windows 7 .............................................................................................. 20

3.3.3 In Windows 8 .............................................................................................. 22

3.3.4 In Windows 8.1 ........................................................................................... 24

3.3.5 In Windows 10 ............................................................................................ 26

Chapter 4 Management ........................................................................................ 28

4.1 Profile ....................................................................................................................... 28

4.1.1 Add a profile ............................................................................................... 28

4.1.2 Modify a profile ........................................................................................... 33

4.1.3 Delete a profile ........................................................................................... 33

4.2 Advanced ................................................................................................................. 34

4.3 About ....................................................................................................................... 34

Chapter 5 AP Mode (For Windows 7 and Windows 8) ....................................... 36

Chapter 6 Uninstall Software ............................................................................... 39

6.1 In Windows XP/7 ..................................................................................................... 39

6.1.1 Uninstall the utility software from your PC ................................................. 39

6.1.2 Uninstall the driver software from your PC ................................................ 40

6.2 In Windows 8/8.1/10 ................................................................................................ 42

6.2.1 Uninstall the utility software from your PC ................................................. 42

6.2.2 Uninstall the driver software from your PC ................................................ 44

Appendix A: Specifications ................................................................................... 37

Appendix B: Glossary ............................................................................................ 39

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

Package Contents

Please verify that all the package contents below are available.

 One Archer T6E/Archer T8E/Archer T9E AC1300/AC1750/AC1900 Wireless Dual Band

PCI Express Adapter

 Quick Installation Guide  One Resource CD, including:

• TP-LINK Wireless Configuration Utility (TWCU) and Drivers

• User Guide

• Other helpful information

Make sure that the above items are contained in the package. If any of the above items is damaged or missing, please contact your distributor.

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

Chapter 1 Product Overview

1.1 Introduction

The adapter is a dual band 802.11ac client device designed to deliver a high-speed wireless performance for your desktop. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, and video streaming.

The adapter provides high speed wireless connection with other wireless clients. The incredible speed makes it ideal for handling multiple data streams at the same time, which ensures your network stable and smooth. The performance of this 802.11ac wireless will give you the unexpected networking experience at speed much faster than 802.11n. It is also compatible with all IEEE 802.11a, IEEE 802.11b, IEEE 802.11g and IEEE 802.11n products.

The adapter supports WEP, WPA-PSK/WPA2-PSK and WPA/WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed.

The adapter is easy to install and manage. The Quick Setup Wizard will guide you step-by-step through the installation process and the TP-LINK Wireless Configuration Utility (TWCU) will instruct you to quickly set up a wireless connection.

With unmatched wireless performance, reception, and security protection, the Archer T6E/Archer T8E/Archer T9E is the best choice for easily adding or upgrading wireless connectivity to your desktop.

1.2 Features

 Supports dual-band, 2.4GHz or 5GHz

 Supports IEEE 802.11 ac

 Seamlessly compatible with 802.11a/b/g/n products

 Experience smoother video streaming and online gaming by choosing the clearer 5GHz band

for wireless connections

 Supports 64/128 WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES), supports IEEE

802.1X

 Supports Windows XP 32/64bit, Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1

32/64bit, Windows 10 32/64bit

 Supports ad-hoc and infrastructure mode

 Bundled utility provides quick & hassle-free installation

1.3 Conventions

You can set the parameters according to your demand. This User Guide is shared by Archer T6E/Archer T8E and Archer T9E. Here in this Guide we use Archer T8E for example.

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

The difference between them is:

 Archer T6E AC1300 Wireless Dual Band PCI Express Adapter provide wireless data rate

of up to 400Mbps(2.4GHz) and 867Mbps(5GHz);

 Archer T8E AC1750 Wireless Dual Band PCI Express Adapter provide wireless data rate

of up to 450Mbps(2.4GHz) and 1300Mbps(5GHz);

 Archer T9E AC1900 Wireless Dual Band PCI Express Adapter provide wireless data rate

of up to 600Mbps(2.4GHz) and 1300Mbps(5GHz).

1.4 LED Status

LED status:

Status Working Status

Flashing

The adapter has been installed.

Data is being transmitted or received at a high data rate.

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide



Chapter 2 Installation

Please install the PCI Express adapter into your computer before installing the driver and utility software from the Resource CD.

2.1 Hardware Installation

1. Install the antennas.

2. Turn off your computer and unplug the power cord from the computer.

3. Open the case and locate an available PCI Express slot. Remove the metal slot cover on the back of the PC. Keep the screws. Turn to your computer manufacturer for instructions if needed.

4. Insert the PCI Express adapter into the PCI Express slot. Make sure that all of its pins have touched the slot's contacts. Once the adapter has been firmly inserted, screw its fastening tab. Then, close your PC case.

5. Insert the power cable back into the computer and turn on your computer.

Note:

When the hardware has been successfully installed on your computer, you may be prompted 'Found New Hardware Wizard' (as shown in Figure 2-1); please click Cancel, and then follow the Software Installation steps to install driver and utility for your adapter.

Figure 2-1 Found New Hardware Wizard in Windows XP

2.2 Software Installation

The adapter’s Setup Wizard will guide you through the installation procedures for Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10. The procedures in different systems are quite similar, therefore here we use the procedures in Windows 7 as an example.

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide



Note:

For Archer T6E, TP-LINK Utility is not supported in Windows 10. And for Archer T8E/T9E, TP-LINK Utility is not supported in Windows 8.1 and Windows 10.

1. Insert the Resource CD into your CD-ROM drive and then select model Archer T6E/Archer T8E/Archer T9E on the window that pops up (as shown in the below Figure 2-2). There will be a menu including: Install Driver and Utility and User Guide. Click Install Driver and Utility to begin.

Figure 2-2

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

2. The InstallShield Wizard window will appear. Click Next to continue.

Figure 2-3

3. Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver. Selecting Install Driver Only can only install driver. Click Next to continue.

Figure 2-4

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

4. Click Change to specify the destination location for the software or you can leave it default. Click Next in the screen below to continue.

5. Click Install to continue the setup.

Figure 2-5

Figure 2-6

Archer T6E/T8E/T9E

802.11AC Wireless Dual Band PCI Express Adapter User Guide

6. The utility and drivers will install. It may take 1~2 minutes.

Figure 2-7

7. After all the steps above, you will see the screen below. Click Finish to complete the setup.

Figure 2-8

8. After installation, the utility configuration page will automatically pop up as shown in the following figure and the icon

will appear in your system tray. If your system doesn’t support the utility, the utility configuration page will not appear. To connect to a network, please refer to Chapter 3 Connect to a Wireless Network.

+ 41 hidden pages