TP-LINK Archer T4U User guide
Quick
Installation
Guide
AC1300 Wireless Dual Band USB Adapter
MODEL NO. Archer T4U
7106506736 REV5.1.0
For Mac OS X
Connect to a Computer
1 2
Option 1: Directly Option 2: Via the USB Extension Cable
Install Driver and Utility
a.
Insert the CD.
Note:
You can also download the driver and utility at
http://www.tp-link.com.
Browse the CD, go to Archer T4U > Mac OS
b.
X Driver, unzip the Mac OS X version.zip file
and run the Installer.
c.
Follow the wizard to complete the installation.
SHELL
uninstall.commandInstaller.pkg
Join a Wireless Network
3
Option 1: Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup
a. Click (TP-LINK Wireless Conf
Utility) on the menu bar.
b. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.
USB-WiFi: On
Turn USB-WiFi Off
TP-LINK_XXXX
TP-LINK_0001
TP-LINK_0903
TP-LINK_TEST_Device
Join Other Network
WPS
Open Wireless Utility
Fri 5:14 PM
iguration
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button
on the adapter until the configuring screen appears.
wps
c. When you are prompted “WPS Protocol Finished”,
click OK.
(WPS)
For Windows
Network Name(SSID)
Channel
Signal
Security
TP-LINK_0903
Network Na
TP-LINK_XXXX
Networks
Wi-Fi
Note:
In Windows XP, if you have installed TP-LINK Utility, you
need to switch to Windows wireless configuration tool first.
This USB Adapter can be powered only by computers that comply with
Limited Power Source (LPS).
Connect to a Computer
1 2
Option 1: Directly Option 2: Via the USB Extension Cable
Note:
In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
Install Driver and Utility
a.
Insert the CD and run the Autorun.exe from
the pop-up Autoplay window.
Notes:
1. You can also download the driver and utility at
http://www.tp-link.com.
2. In some operating systems, the CD screen will pop up
automatically. Otherwise, run the CD manually.
b.
Select Archer T4U and click Install Driver, then
follow the InstallShield Wizard to complete the
installation.
Note:
During the installation, select TP-LINK Wireless Configuration
Utility and Driver if you want to use TP-LINK Utility and WPS
function.
Setup Wizard
Archer T4U
Install Driver
User Guide
Browse CD
EXIT
Join a Wireless Network
3
Option 1: Via Windows Wireless Utility Option 2: Via TP-LINK Utility
Click or (Network icon) on the taskbar,
select your Wi-Fi network, and click Connect.
TP-LINK_TEST_Device
TP-LINK_0903
TP-LINK_XXXX
√
Connect automatically Connect
Select your Wi-Fi network from the pop-up utility
window and click Connect. The symbol indicates
a successful connection.
Status WPS Profile AdvancedNetwork
TP-LINK_XXXX
TP-LINK_0903
TP-LINK_TEST_Device
TP-LINK_0001
WPA/WPA2-Personal
Connect automatically
WPA/WPA2-Personal
None
None
6 (2.4G)
2 (2.4G)
36 (5G)
5 (2.4G)
Connect
Option 3: Via Wi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button
on the adapter until the configuring screen appears.
PS
W
TP-LINK
c.
When you are prompted “Successfully connected
to the network by WPS!”, click OK.
For more information, please visit our website
http://www.tp-link.com
Loading...