Toyota CAMRY 2005 Owner's Manual
05 CAMRY NAVI_U (L/O 0407)
BASIC FUNCTIONS
SECTION
I
BASIC FUNCTIONS
Basic information before operation
Display operation 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch switch operation 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inputting letters and numbers 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current position display 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen scroll operation (one-touch scroll) 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map scale 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Orientation of the map 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of the navigation system 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map database information and updates 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
BASIC FUNCTIONS
05 CAMRY NAVI_U (L/O 0407)
Display operation
1U009
You can adjust the angle of the display by
pushing the
“TILT” button will tilt the display to
the
positions
the reverse order.
If you turn the ignition switch off, the display
will automatically move back to position
The display will automatically resume the previous position when the ignition switch is
turned to the “ACC” or “ON” position.
“TILT” button. Each push of
1, 2, 3
and then back to 0 in
0
CAUTION
Take care not to jam your hand while the
display is moving. Otherwise, you
could be injured.
NOTICE
Do not obstruct the display while it is
moving. It could damage your navigation system.
INFORMATION
Under extremely cold conditions, the
display may react slowly or operation
sound may become louder.
.
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent damage to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.
Do not use objects other than your finger
to touch the screen.
INFORMATION
If the system does not respond to a
touch of a switch, move your finger
away from the screen and then touch
it again.
You cannot operate dimmed
switches.
Wipe off fingerprints on the surface of
the display using a glass cleaning
cloth.
The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
Under extremely cold conditions, the
map may not be displayed and the
data input by a user may be deleted.
Also, the switches may be harder
than usual to depress.
2
05 CAMRY NAVI_U (L/O 0407)
BASIC FUNCTIONS
Inputting letters and numbers
When searching for an address or a name, or
entering a memo, you can input letters and
numbers via the touch screen.
To input letters
To display the alphabet keys, touch the
“A-Z” switch or the “ ” switch.
Enter letters by touching the alphabet keys directly.
: Touching this swi t c h erases one let-
ter. Holding th is switch will continue
to erase letters.
To input numerals and symbols
To display the number keys and symbol keys,
touch the
Enter numerals and symbols by touching the
number keys and symbol keys directly.
“0-9” switch.
: Touching this swi t c h erases one let-
ter. Holding th is switch will continue
to erase letters.
: Touching this switch displays other
symbols.
To display the list
T o search for an address or a name, touch the
“List” switch. Matching items from the da-
tabase are listed even if the entered address
or name is incomplete.
If the number of matches is four or less, the list
is displayed without touching the
switch.
“List”
3
BASIC FUNCTIONS
05 CAMRY NAVI_U (L/O 0407)
INFORMATION
The number of matching items is shown
to the right side of the screen. If the
number of matching items is more than
9,999, the system displays “
the screen.
∗∗∗∗
” on
List screen operation
When a list is displayed, you can scroll or
page through the list by using the appropriate
switch.
To shift to the next or previous
page.
To scroll up or down one item at a
time.
This expresses a displayed
screen position.
If appears to the right of the
item name, the complete name is
too long for the display. Touch
to scroll to the end of the name.
Touch to scroll to the
beginning of the name.
4
05 CAMRY NAVI_U (L/O 0407)
BASIC FUNCTIONS
Current position display
When starting the navigation system, the current position is displayed first.
This screen displays the current vehicle position and a map of the surrounding local area.
The current vehicle position mark appears in
the center or bottom center of the map
screen. You can return to this map screen
showing your current position at any time
from any screen by touching the
VOICE”
During driving, the current vehicle position
mark is fixed in the screen and the map
moves.
button.
“MAP/
The current position is automatically set as
your vehicle receives signals from the GPS
(Global Positioning System). If your current
position is not correct, it is automatically corrected after your vehicle receives signals
from the GPS.
INFORMATION
After the battery disconnection, or on
a new vehicle, the current position
may not be correct. As soon as the
system receives signals from the
GPS, the correct current position is
displayed.
To correct the current position manually, see page 77.
Screen scroll operation
(one-touch scroll)
T ouch a n y po i n t o n t h e map and that point
moves to the center of the screen and is
shown by the cursor mark.
If you wish to look at a point on the map which
is different to your current vehicle position,
you can bring the desired point to the center
of the screen by using the scroll feature.
If you continue to hold your finger on the
screen, the map will continue scrolling in that
direction until you lift your finger.
5
BASIC FUNCTIONS
05 CAMRY NAVI_U (L/O 0407)
After you scroll the screen, the map remains
centered at the selected location until you activate another function. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When you touch the
VOICE”
mark returns to the center of the screen and
the map moves as you proceed along the
designated route.
button, the current vehicle position
“MAP/
INFORMATION
When you use the one-touch scroll feature, the current vehicle position mark
may disappear from the screen. Move
the map with a one-touch scroll again or
push the
turn to the current vehicle position map
location display.
“MAP/VOICE”
button to re-
To set the cursor position as a destina-
tion
You can set a specific point on the map as a
destination using the one-touch scroll function.
Touch the “Enter ” switch.
The screen changes and displays the map
location of the selected destination and
the route preference. (See “ — Entering
destination” on page 38.)
If there is already a preset destination, touch
“Add to ” switch or the “Replace
the
” switch.
When there is already a preset destination,
using the
tional destination, will set the new one as the
first point of arrival.
“Add to ” switch to set an addi-
To register the cursor position as a
memory point
Memory point registration enables easy access to a specific point.
Touch the “Mark” switch.
When you touch the
lowing screen appears for a few seconds, and
then the map screen returns.
“Mark” switch, the fol-
6
Loading...