Toshiba TDP-MT800 Product Sheet

• New High Contrast TI™HD2+ DMD DLP™Chip

• 1280 x 720 resolution for true 720p HD performance

• 1100 ANSI Lumens allows for optimum brightness in any environment

• 2200:1 Contrast Ratio ensures a sharper, deeper image with richer colors

• 7-segment Color, 5-speed color wheel with neutral density filter, resulting in a high quality, life-like picture

• Projects an image up to 260” measured diagonally

• Improved Carl Zeiss™lens system for increased sharpness and detail

• Faroudja (Sage) FL12300 DCDi+™De-Interlacer/Scaler/Enhancer ensures a sharp, smooth, film-like image

MT800 DLP

™

Projector

KEY FEATURES

• DLP Technology

• 7 Segment Color Wheel (5x, 300Hz, 9000 RPM)

• 1100 ANSI Lumens

• 2200:1 Contrast Ratio

• Automatic Digital Keystone Correction

• Independent Color Control

ADVANTAGE TOSHIBA

• Displays high-quality images in both widescreen (16 x 9) and conventional (4 x 3) modes

• Manual Zoom and Focus

• Front/Rear/Ceiling Mount

• Illuminated Remote Control

• DVI with High-Bandwidth Digital Content Protection

TECHNOLOGY & BENEFITS

VIDEO

• NEW TI HD2+ DMD DLP™chip offers a significantly cleaner image by filling in the small indentations (Via's) in the mirrors resulting in an impressive color corrected contrast ratio (2200:1) at 1100 ANSI Lumens.

• Faroudja FL12300 DCDi+™De-Interlacer/Scaler/ Enhancer - With Adaptive Luma/Chroma Enhancement and Scaler now includes 3:2 to 2:2 pulldown conversions for optimizing 60Hz video

• 7 Segment, 5X Color Wheel - To reduce the "rainbow effect" in DLP projectors the TDP MT800 uses a 7 segment color wheel that includes a neutral density filter in the green section for smoother, more natural images.

SPECIFICATIONS

Panel Tech. HD2 DMD DLP™ Resolution 1280 x 720 (16:9) Brightness (Lumens) 1100 ANSI Aspect Ratio 16:9 and 4:3 Contrast Ratio 2200:1 7-segment, 5-speed Color Wheel 9000 rpm Improved Lens System High Focus Carl Zeiss

™

All-Glass with Manual Focus Ring Image Offset 116 degree Lamp 250 W, UHP, 1500H Life with Anti-flicker Circuitry Focus Manual Zoom Manual, 1.20:1 Keystone Correction Digital Projection Distance 5’ (short throw) to 32’ (long throw) Zoom Ratio 1.4:1 Throw Ratio .48-.67 Operation Noise 35dB (low power), 37dB (high power) Scanning Frequency 21-91kHz (H), 50-85kHz (V) Dot Clock 135Mhz Colors 16.7 million Projection Modes front, rear, ceiling TheaterWide Modes enhanced, widescreeen, anamorphic Power Consumption 350W Power Source 100 - 240V (50/60Hz) Remote Control Illuminated Options Cable cover and ceiling mount

MT800

http://www.tacp.toshiba.com Customer Service: 800.631.3811

Marketing Communications © Toshiba America Consumer Products, L.L.C. 82 Totowa Road, Wayne, NJ 07470 (2004). All Rights Reserved (02/04.02) DLP and TI are trademarks of Texas Instruments Inc. Carl Zeiss is a trademark of Carl Zeiss, Inc. DCDi+ is a trademark of Faroudja Laboratories, Inc., a division of Genesis Microchip Inc.

Product design and specification subject to change or modification without notice.

Video Input NTSC, PAL, SECAM, 480p, 546p, 720p,

1035i, 1080i, 1080p, (480p input will bypass

de-interlacer, 720p will bypass

de-interlacer/scaler) Computer Input VGA-SXGA+ Input Terminals DVI with HDCP (1), Component Video

(2 - Gold RCA-Y,PR,Pb), S-Video (2),

Composite Video (1), 15 Pin D-Sub (1),

D-Ter minal (-Component)

Control Terminals RS232 (1-9 Pin Male D-Sub),

12V Screen Trigger (2-3.5mm mini-jack, screen

drop and 4 x 3 aspect curtains) Picture Memory Settings Individual by input, plus 3 user memories Gamma Control 3 De-Gamma levers:film, video, PC,

Dynamic Gamma (on or off) Sharpness Control Sharpest, Sharper, Standard, Softer, Softest Color Temperature Control 6500K (default/8200K/9300K, |

Plus 1 User definable mode with

gain and bias adjustment

PRELIMINARY