Toshiba TCB-DP22CUL Installation Manual
AIR CONDITIONER (SPLIT TYPE)
Installation Manual
Drain Pump Kit
Model name :
TCB-DP22CUL
Installation Manual
2
Air Conditioner (Split type)
Manuel D’installation
12
Climatiseur (Type split)
English
Français
2
Drain Pump Kit Installation Manual
Please read this Installation Manual carefully before installing the Air Conditioner.
• This Manual describes the installation method of the DRAIN PUMP KIT.
• For installation of the outdoor unit, follow the Installation Manual attached to the outdoor unit.
WARNING
For this Drain Pump Kit, please use the Elbow Piping Kit (MODEL: TCB-KP12CUL, TCB-KP22CUL) sold separately.
If using a piping kit procured locally, it may cause a water leak or so on.
ADOPTION OF NEW REFRIGERANT
This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional
refrigerant R22 in order to prevent destruction of the ozone layer.
English-1
CONTENTS
Accessory parts and Parts to be procured locally ...........................................3
1 PRECAUTIONS FOR SAFETY ....................................................................4
2 PREPARATION FOR INSTALLATION OF DRAIN PUMP KIT .................... 5
3 INSTALLATION PROCEDURE OF DRAIN PUMP KIT ............................... 6
4 DRAIN PIPING WORK ............................................................................... 10
5 THERMAL INSULATOR FOR CEILING PLATE ........................................ 10
6 CABLE CONNECTION .............................................................................. 11
7 TEST RUN .................................................................................................. 11
3
Drain Pump Kit Installation Manual
Accessory parts and Parts to be procured locally
r Accessory parts
r Specification
Part name
Drain Pump Kit
Drain Pump Kit fixture
Drain hose
Thermal insulating pipe
Installation Manual
Drain hose fixing band
Thermal insulator
for drain connecting section
Thermal insulator
of ceiling panel
Screw
Banding band
Q’ty
1
1
1
1
1
2
2
1
4
2
Shape
This manual
Usage
—
For mounting Drain Pump Kit
For connecting vinyl chloride pipe of Dain Pump kit
For thermal insulation of drain hose
Be sure to hand to users.
For fixing drain hose
For thermal insulation of drain hose connecting section
For sealing upper piping hole of indoor unit
For fixing Drain Pump Kit
For fixing fixture of Drain Pump Kit
For fixing wires
Drain Pump Kit model name
TCB-DP22CUL
Height of drain up
23.6” (600mm) or lower from top face of the set
English-2
En
4
Drain Pump Kit Installation Manual
1 PRECAUTIONS FOR SAFETY
• Ensure that all Local, National and International regulations are satisfied.
• Read this “PRECAUTIONS FOR SAFETY” carefully before Installation.
• The precautions described below include the important items regarding safety. Observe them without fail.
• After the installation work, perform a trial operation to check for any problem.
Follow the Owner’s Manual to explain how to use and maintain the unit to the customer.
• Turn off the main power supply switch (or breaker) before the unit maintenance.
• Ask the customer to keep the Installation Manual together with the Owner’s Manual.
WARNINGS
• Ask an authorized dealer or qualified installation professional to install/maintain the air
conditioner.
Inappropriate installation may result in water leakage, electric shock or fire.
• Turn off the main power supply switch or breaker before attempting any electrical work.
Make sure all power switches are off. Failure to do so may cause electric shock.
• Connect the connecting cable correctly.
If the connecting cable is connected in a wrong way, electric parts may be damaged.
• When moving the air conditioner for the installation into another place, be very careful not to
enter any gaseous matter other than the specified refrigerant into the refrigeration cycle.
If air or any other gas is mixed in the refrigerant, the gas pressure in the refrigeration cycle becomes abnormally
high and it resultingly causes pipe burst and injuries on persons.
• Do not modify this unit by removing any of the safety guards or by by-passing any of the safety
interlock switches.
• Exposure of unit to water or other moisture before installation may cause a short-circuit of
electrical parts.
Do not store it in a wet basement or expose to rain or water.
• After unpacking the unit, examine it carefully if there are possible damage.
• To avoid personal injury (with sharp edges), be careful when handling parts.
• Perform installation work properly according to the Installation Manual.
Inappropriate installation may result in water leakage, electric shock or fire.
• Electrical work must be performed by a qualified electrician in accordance with the Installation
Manual.
An insufficient power supply capacity or inappropriate installation may cause fire.
English-3
Loading...