Toshiba TCB-BC1601UE INSTALLATION MANUAL

AIR DISCHARGE DIRECTION KIT Model:TCB-BC1601UE

INSTALLATION MANUAL

Air discharge

parts

Packing

1 1

470

x75x

B 390x75x40

500

105x2

B 460x105x2

C 450

x75x

Parts name Dimension Form Q'ty

3 supply directions

2 supply directions

•

Air discharge parts A (*1

)

• Packing A

No Good

*1: For the models MMU-AP0091H~AP0151H, use the air discharge parts A (410mm in length)

which is prepared by cutting off 60mm.

*2: Use packing B (410mm in length) which is prepared by cutting off 50mm.

• Air discharge parts B

• Packing B (*2

)

To p

• Air discharge parts A (*1

)

• Packing A

Under

• Air discharge parts C

• Packing B

• Air discharge parts C

• Packing B

Model name

MMU-AP0091H to AP0561H RAV-SM560UT-E to SM1400UT-E, RAV-SM562UT-E to SM1402UT-E RAV-SP1100UT-E, RAV-SP1102UT-E

2. ACCESSORIES

1. APPLICATION MODEL

3. INSTALLATION

No. of discharge directions can be selected according to the shape of rooms and installation position.

(3) Installing the indoor unit

• Mount the indoor unit. Make sure that the blocking direction and piping direction are as shown in the table below. (Refer to the figure-3 for the view of an illustration.)

Do not use any blocking direction other than indicated in the table below.

(4) To use this kit for the Digital Inverter Series Airconditioner, change the settings of the remote control as

described below. (No setting change is required for the VRF Series Airconditioner.)

(Figure 3 shows a view seen from the drain pan.)

(1) Installing the indoor unit

• Mount the indoor unit onto the ceiling. (For details, refer to Manual of attachment to an indoor unit.)

(2) Installing the air discharge parts and packing

• Attach the air discharge parts to the supply opening (made of Styrofoam) of the indoor unit, and block the supply opening by attaching a packing on it. (See Figure 1 and Figure 2.)

• Make sure that the packing cover the inner Styrofoam part of the indoor unit. Otherwise condensation may occur. (See Figure 1.)

To use this kit for the Digital Inverter Series Airconditioner, change the settings of the remote control as described later. Otherwise the blow-off temperature drops upon cooling, causing condensation. For the VRF Series Airconditioner, no setting change is required.

Blocking part

Drain piping partRefrigerant piping part

Direction of supply

Good

GoodNo Good

(

Figure-3

)

Inner styrofoam partSupply opening

Box besides a unit

Packing (A,B

)

Air discharge parts (A,B,C

)

Drain pan

(

Figure-1

)

Packing A

Air discharge parts A

Refrigerant

piping

side

Drain piping side

Packing B (cutting off 50mm)

Packing B

Air discharge parts B

Air discharge parts C

(

Figure-2

)

CAUTION

When using an optional highly efficient filter, supply directions to 3 and 2 directions cannot be performed.

Regulation of air quantity is required when installing in a high ceiling, therefore set up "High ceiling

setting" apart from the above-mentioned setting change.

For details, refer to "High Ceiling Installation Manual" of attachment to an indoor unit.

CAUTION

CH53886801-(1)

Do the following while the air conditioner is not running.

Press and hold the 3 buttons simultaneously for 4 seconds or longer. The unit number displayed first is the indoor unit address of the parent machine for group control. Only the fan of the selected indoor unit operates.

The indoor unit numbers within group control are displayed one by one as you press the button. Only the fan of the selected indoor unit operates.

(Temperature setting)

Use the button to set Item Code .

(Timer setting)

Use the button to set the setting data to .

Press the button. (The display illuminates when the setting change is complete.) To change the setting of the selected indoor unit, repeat the steps from .

Press the button to return to the normal stop state.

SET

UNIT

SET CL

1 4 2 356

REMOTE CONTROLLER

SET CL

UNIT

CODE No.

SET DATA

UNIT No

CODE No.

SET DATA

UNIT No

1 4 23 56

Setting Change Procedure (Only Digital Inverter Series

)

In the case of RBC-AMT21E In the case of RBC-AMT31E