The MG06ACA Enterprise Capacity HDD models provides up to 10TB
[1]
of capacity and 7,200
Advanced Format sector technology models are available. 4Kn sector models
APPLICATIONS
rpm performance, in a robust design engineered for nearline business-critical workloads.
The MG06ACA model generation utilizes industry-standard 3.5-inch
factor and Advanced Format sector technologies for optimum capacity and data reliability.
Models support Toshiba Persistent Write Cache technology
performance while assuring the consistency of write operations in the ev ent of a sudden loss
of power. Equipped with SATA 6.0 Gbit/s
models help to save rack space and reduce the footprint an d operational burden of business
critical servers and storage systems.
The MG06ACA Series improves sustained transfer rate performance to 237 MiB/s
increases MTTF
(MG06ACAxxxA) offer suitable performance and compatibility with the 4Kn-capable
applications and operating environments. 512e sector models (MG06ACAxxxE) provide
support for legacy applications and operating environments that require 512 byte sector
lengths.
[6]
by 25% when compared to the prior MG05ACA series. 4Kn or 512e
[4]
interface, the Enterprise Capacity MG06ACA
[2]
26.1 mm height form
[3]
which helps enhance
[5]
and
Product image may represent a design model.
• Industry Standard 3.5-inch 26.1 mm Height Form Factor
• Large 10TB Capacity; plus 8TB and 6TB MG06 Series
models
• 7,200 rpm Performance
• SATA 6.0 Gbit/s Interface
• MTTF 2.5 M hours
• 550 Total TB Transferred per Year Workload Rating
• 4Kn or 512e Advanced Format Sector Technology
• Toshiba Persistent Write Cache Technology for Data-
[1] Definition of capacity: Toshiba defines a megabyte (MB) as 1,000,000 bytes, a gigabyte (GB) as 1,000,000,000 bytes and a terabyte (TB) as 1,000,000,000,000
bytes. A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1GB = 2
less storage capacity. Available storage capacity (including examples of various media files) will vary based on file size, formatting, settings, software and operating
system, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity may vary.
[2] "2.5-inch" and "3.5-inch" mean the form factor of HDDs or SSDs. They do not indicate drive's physical size.
[3] PWC with PLP is a function to handle the write data that the drive reports "Normal completion" to the host but not being stored to hard disk media yet. The write data
may be written to the commanded LBA on the hard disk media. The un-written data to hard disk media is stored to Flash memory using back up power by PLP when
the power supply to the drive suddenly is shut down. And, after PLP operation, it may be required more time to start up the drive than in case of normal shutdown. 1)
PLP does not secure data in the mode of all the power shutdowns. When power supplies other than recommended procedure are intercepted, data might be lost. 2)
In the power shutdown before it reports on the Write completion, data not anticipated might be lost.
[4] Read and write speed may vary depending on the host device, read and write conditions, and file size.
[5] A kibibyte (KiB) means 2
[6] MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which
may not accurately reflect actual operation. Actual operating life of the product may be different from the MTTF.
[7] Workload is defined as the amount of data written, read or verified by commands from host system.
[8] SIE: Sanitize Instant Erase. SIE is a function to invalidate the data recorded on the magnetic disks at a blink.
[9] Read–modify-write is supported.
[10] Input voltages are specified at the HDD connector side, during HDD ready state.
[11] Make sure the value is not less than -0.3V DC (less than -0.6V, 0.1ms) when turning o n or off the power.
[12] The measuring method is based on ISO 7779. Idle is active idle mode
[13] Vibration applied to the HDD is measured at near the mounting screw hole on the frame as much as possible.
[14] At random seek write/read and default on retry setting with log sweep vibration.
[15] At power-off state after installation
10
, or 1,024 bytes, a mebibyte (MiB) means 220, or 1,048,576 bytes, and a gibibyte (GiB) means 230, or 1,073,471,824 bytes.
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written
permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for
complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize
risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including
data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product
and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own
product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs,
algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and
applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY
HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN
LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific
applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment
used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and
equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable
laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement
of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property
right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR
PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING
WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT
LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS
ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION,
INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF
INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the
design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass
destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade
Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Product may include products subject to foreign exchange and foreign trade control laws.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Pro duc t. Pleas e
use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without
limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable
laws and regulations.
11 / 11
Rev. 02: September, 2017
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.