Toshiba IK-M41R2, IK-M41F2, IK-C41R2 User Manual
Specifications and Main Features
- DC Power: DC12V – 10%
- Power current consumption: 250 Ma
- Image Unit: 1/2” Interline transfer CCD (768H x 494V effective picture elements)
- Scanned Area: 6.54mm x 4.89mm
- Scanning rate: Horizontally: 15.734 kHz, Vertically: 59.94 Hz
- Sync. system: Internal and External syncs (automatic change-over) sync inputs as C-SYNC VS HD VD reset/restart one pulse trigger mode.
- Resolution: Up to 400 (Vertical) more than 350 (Vertical) at Field accumulation mode. Horizontal resolution up to 570.
- Highlight illumination level: Recommended minimum level of illumination for Ho: 36 Ix F 1.6 3200K
- Minimum illumination: 1.8 Ix 50 IRE F1.6 y 0.45 with built in Infra Red Proof Filter.
- S/N Ratio: Not less than 56dB at y=1 WEIGHT ON.
- Output Signal: VS 1.0Vp-p NTSC compatible.
- Output Impedance: 75 Ohms Unbalance
- IR Filter: Built in IK-M41F2 and Dummy Glass IK-M41R2
- Temperature Conditions: -10 up to +50 C’ (14F to 122F)
- Relative Humidity Conditions: 30% to 90%
- Vibration durability: 68.6 m/s² (10 up to 200Hz)
- Shock durability: 686 m/s² (Camera Head).
- Weight: 16g (Camera without lens 0.56 oz and CCU510g18oz).
- Dimension: Refer to the ‘PROFILE’.
- Electronic shutter: Auto or Manual setting from 1/60s to 1/30,000s.
- Accumulation Field/Frame modes: Accumulation field/frame mode is supported
- Sensitivity: Adjustable from Normal to +12dB.
- Auxiliary Function: Settings for the output of video index, the field designation of the output, DC direct connection and coupling by means of a condenser
- Options: Refer to ‘OPTIONS’
Frequently Asked Questions
Q1: What is the power requirement for the camera?
A1: The camera requires a direct current power supply of 12 volts and the current consumption is of 250 mA.
Q2: What is the maximum resolution it is possible to obtain with this type of camera?
A2: The camera achieves approximately 570 TV lines of horizontal resolution and over 400 TV lines of vertical resolution in the frame mode and over 350 TV lines of vertical resolution in the field mode.
Q3: What is the minimum illumination in order for the camera to operate?
A3: The low illumination level needed is 1.8 Ix but under defined parameters (50 IRE, F1.6, y=0.45 which is with an opaque infrared filter).
Q4: In this specific camera, is there an infrared protection built-in?
A4: The camera has an infrared PO filter built in with the model IK-M41F2 while the IK-M41R2 model is fitted with dummy glass.
Q5: What type of sync system does the camera use?
A5: The camera is internal or external sync autocut with change over immediately inclusive of C-SYNC/VS mode, HD, VD mode, Reset or Restart and One pulse trigger mode.
Q6: What are the required operating temperature and humidity ranges for the camera?
A6: The camera serviceable limits for temperature ranges from -10°C to +50°C (14F to 122F) and the humidity range is from 30% to 90%
Q7: What is the weight of the camera head?
A7: Weight of Camera head is 16g (0.56 oz) without lens attached
User Manual
Loading...