Toshiba 19LV611U, 22LV610U, 22LV611U, 26LV610U, 26LV61K Owner's Manual

19LV610U

19LV611U

22LV610U

22LV611U

26LV610U

OWNER’S MANUAL

4

14

22

47

50

63

Introduction

Connections

Basic setup

Basic playback

Advanced playback

Function setup

69

Others

27

TV operation

©2009 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.

19/22/26-inch* class LCD TV/DVD
COMBINATION

*Screen size is approximate.

Ownerʼs Record

The model number and serial number
are on the back of your TV/DVD.
Record these numbers in the spaces
below. Refer to these numbers
whenever you communicate with your
Toshiba dealer about this TV/DVD.

Model number:
Serial number:

52G0101A.indb 152G0101A.indb 1 1/5/09 2:59:33 PM1/5/09 2:59:33 PM

Introduction

2

Dear Customer,

Thank you for purchasing this Toshiba LCD TV or TV/DVD
Combination television.

This manual will help you use the many exciting features of
your new LCD TV. Before operating your LCD TV or TV/DVD
Combination, please read this manual completely, and keep it
nearby for future reference.

• The examples used throughout this manual are based on
the 26LV610U model.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle,
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

CAUTION: To reduce the risk of electric shock,

do not use the polarized plug with an extension
cord, receptacle, or other outlet unless the blades
can be inserted completely to prevent blade
exposure.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention
to Article 820-40 of the NEC, which provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to grounding system of the building, as close to the point of
cable entry as practical. For additional antenna grounding information,
see item 29 on page 5.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES
OR OPEN FLAMES AWAY FROM THIS PRODUCT AT
TIMES.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

ENE RGY STAR® qualified TV. Products that earn
the ENE RGY STAR prevent green house gas
emissions by meeting strict energy efficiency
guidelines set by the U.S. Environmental
Protection Agency and the U.S. Department of
Energy. ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.

WARN ING: If you decide to wall mount this television,
always use a UL Listed wall bracket appropriate for the
size and weight of this television. The use of any wall bracket
other than a UL Listed wall bracket appropriate for the size
and weight of this television for wall mounting this television
could result in serious bodily injury and/or property damage.
See “Choosing a location for your LCD TV” (Pg.6).

Congratulations on your purchase! As you enjoy your
new product, please keep these safety tips in mind:

The Issue

• The home theater entertainment experience is a growing trend
and larger flat panel displays are popular purchases. However,
flat panel displays are not always supported on the proper stands
or installed according to the manufacturer’s recommendations.

• Flat panel displays that are
inappropriately situated on dressers,

bookcases, shelves, desks,

speakers, chests or carts may fall

over and cause injury.

TOSHIBA Cares!

• The consumer electronics industry
is committed to making home

entertainment enjoyable and safe.

Tune Into Safety

•

One size does NOT fit all. Follow the manufacturer’s recommendations
for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for
proper use of this product.

• Don’t allow children to climb on or play with furniture and
television sets.

• Don’t place flat panel displays on furniture
that can easily be used as steps, such
as a chest of drawers.

• Remember that children can
become excited while watching a
program, especially on a “larger
than life” flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.

• Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.

Wall Mounting: If you decide to wall mount your
flat panel display, always:

• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory (such
as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount
manufacturers.

• If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.

• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional
installer.

• A minimum of two people are
required for installation. Flat panel
displays can be heavy.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat
Panel Display

WARNING

: Handling the cord on this product or cords associated
with accessories sold with this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

52G0101A P02-05.indd 252G0101A P02-05.indd 2 1/6/09 3:21:58 PM1/6/09 3:21:58 PM

Introduction

3

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
COMPLIES WITH FDA PERFORMANCE STANDARDS FOR
LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT TO
LASER NOTICE NO. 50, DATED JUNE 24, 2007.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ

THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR
FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE
LOCATION.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, NEVER
OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE
PRESENT WHEN THE ENCLOSURE IS OPENED. NEVER STARE
INTO BEAM.

FCC compliance information

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT TIMES.

FCC Declaration of Conformity Compliance Statement (Part 15):

The Toshiba 19LV610U, 19LV611U, 22LV610U, 22LV611U, 26LV610U LCD TV/DVD Combination complies with Part 15 of
the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this devicemust accept any interference received, including interference that may cause undesired operation.

The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C.

82 Totowa Rd. Wayne, NJ 07470.
Ph: [phone] or visit TACPʼs website at www.tacp.Toshiba.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the userʼs authority to operate this

equipment.

ON DISPOSAL

The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental
considerations. For disposal or recycling information, contact your local authorities or the
Electronic Industries Alliance (www.eiae.org).

CLASS 1
LASER PRODUCT

52G0101A.indb 352G0101A.indb 3 1/5/09 2:59:37 PM1/5/09 2:59:37 PM

Introduction

4

SAFETY INSTRUCTIONS

16) To avoid damage to this product, never place or
store the TV in direct sunlight; hot, humid areas;
or areas subject to excessive dust or vibration.

17)

ALWAYS plug the product into an outlet that is located
in such a manner that it can be easily unplugged in
case the product requires service.

18) NEVER route the productʼs power cord inside a wall

or similar enclosed area.

19)

Never modify this equipment. Changes or modifi cations
may void: a) the warranty, and b) the userʼs authority

to
operate this equipment under the rules of the
Federal Communications Commission.

20) DANGER: RISK OF SERIOUS

PERSONAL INJURY, DEATH, OR

EQUIPMENT DAMAGE! Never place

the TV on an unstable cart,
stand, or table. The TV may

fall, causing

serious personal injury,

death, or serious

damage to the TV.

21) Never place items such as vases, aquariums, or
candles on top of the TV.

22) WARNING: Always place the TV on the fl oor or a
sturdy, level, stable
surface that can
support the weight
of the unit. To secure
the TV, use a sturdy
strap from the hooks
on the rear of the TV
pedestal to a wall
stud, pillar or other
immovable structure. Make sure the strap is tight,
secure, and parallel to the fl oor.

23)

Never expose the apparatus to dripping or splashing
liquid or place items such as vases, aquariums, any
other item fi lled with liquid, or candles on top of the TV.

24)

Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides.

Never place the TV:

•

on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains,
or walls; or

• in a confi ned space such as
a bookcase, built-in cabinet,
or any other place with poor ventilation.

The slots and openings are provided to protect the TV from
overheating and to help maintain reliable operation of the TV.
Leave a space of at least 4 inches around the TV.

25) Always place the back of the television at least four
(4) inches away from any vertical surface (such as a
wall) to allow proper ventilation.

26) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord
is subject to wear or abuse.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install in accordance with the manufacturerʼs instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.

9)

Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has
two blades and a third grounding prong.

The wide blade or the third prong

are provided for your safety. If
the provided plug does not fi t into
your outlet, consult an electrician for
replacement of the obsolete outlet.

10)

Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11) Only use attachments/accessories specifi ed by the

manufacturer.

12)

Use only with the cart, stand, tripod,
bracket, or table specifi ed by the
manufacturer, or sold with the
apparatus.

When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13)

Unplug this apparatus during lightning
storms or when unused for long periods
of time.

14) Refer all servicing to qualifi ed service personnel.

Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and
heed all warnings when installing your TV:

Important Safety Instructions

Hooks

TV side

TV top

Band

Sturdy tie (as short as possible; min. 4 in.)

Screw

Clip

Wide plug

Additional Safety Precautions

14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV does

not operate normally, take the following precautions:

• ALWAYS turn off the TV and unplug the power
cord to avoid possible electric shock or fi re.

• NEVER allow your body to come in contact with
any broken glass or liquid from the damaged
television. The LCD panel inside the TV contains

glass and a toxic liquid. If the liquid comes in contact

with your mouth or eyes, or your skin is cut by

broken glass, rinse the affected area thoroughly

with

water and consult your doctor.

• ALWAYS contact a service technician to inspect
the TV any time it has been damaged or dropped.
14b) WARNING: To prevent the spread of fi re, keep

candles or other open fl ames away from this product
at all times.

15) WARNING: NEVER expose batteries to excessive

heat such as sunshine, fi re, or the like.

52G0101A P02-05.indd 452G0101A P02-05.indd 4 1/6/09 4:00:02 PM1/6/09 4:00:02 PM

Introduction

5

Installation (cont. from previous page)

27) Never overload wall outlets and extension cords.

28) Always operate the TV with a 120V AC, 60Hz power
source only.

CAUTION: To reduce the risk of electric shock, do not use the
polarized plug with an extension cord, receptacle, or other outlet
unless the blades can be inserted completely with three-wire
grounding type to prevent blade exposure.

29) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see
Section 810 of the National Electric Code.)

30) DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

• Use extreme care to make sure you

are never in a position where your body
(or any item

you are in contact with,

such

as a ladder or screwdriver) can

accidentally touch overhead power lines.

Never locate the antenna near overhead

power lines or other electrical circuits.

•

Never attempt to install any of the following

during

lightning activity: a) an antenna system; or

b) cables,

wires, or any home theater component

connected

to an antenna or phone system.

Care

For better performance and safer operation of your
TOSHIBA TV, follow these recommendations and precautions:

31) Always unplug the TV before cleaning.

Wipe the display panel

surface gently using only
a soft cloth (supplied.) A
hard cloth may damage the
surface of the panel. Avoid
contact with alcohol,
thinner, benzene, acidic or
and alkaline solvent cleaners, abrasive
cleaners, or chemical cloths, which may damage
the surface. Never spray volatile compounds such
as insecticide on the cabinet. Such products may
damage or discolor the cabinet

.

32)

WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of

any kind into the TV cabinet slots.

Antenna discharge unit
(NEC Section 810-20)

Antenna
lead-in wire

Grounding conductors
(NEC Section 810-21)

Ground clamps

Power service grounding

electrode system

(NEC Art 250 Part H)

Ground clamp

Electric service

equipment

SAFETY INSTRUCTIONS

(Continued)

Care (cont. from previous column)

33)

While it is thundering, do not touch the connecting

cables or apparatus.

34)

For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the
TV unattended or unused for long periods of time.

35)

ALWAYS unplug the TV to completely disconnect
from mains power. When the TV is turned off using
the on/off switch, it is not completely disconnected
from power and a minute amount of current is still
consumed.

36) During normal use, the TV may make occasional

snap ping or popping sounds. This is normal,
especially when the unit is being turned on or off.
If these sounds become frequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Center.

37)

Keep your fi ngers well clear of the disc slot as it is closing.

Failure to do so may cause serious personal injury.

38) When you use headphones, keep the volume at a
moderate level. Using headphones continuously

at a high volume may cause hearing damage.

39)

NEVER look directly into the disc slot or ventilation

slots at the source of the laser beam. Doing so

may cause sight damage.

40) NEVER use a cracked, deformed, or repaired disc.

Such discs are easily broken and may cause serious

personal injury or product damage. SUCH DAMAGE

IS NOT COVERED UNDER YOUR WARRANTY.

41) WARNING: RISK OF SERIOUS PERSONAL

INJURY OR EQUIPMENT DAMAGE!

• Never strike the screen with a sharp or heavy object.

• Never touch, press, or place anything on the
LCD screen. These actions will damage the LCD
screen If you need to clean the LCD screen,
follow the instructions in item 31 on this page.

Service

42) WARNING: RISK OF ELECTRIC

SHOCK! Never attempt to service

the TV yourself.

Opening and removing the covers
may expose you to dangerous voltage or other
hazards. Failure to follow this WARNING may
result in death or serious injury.

Refer all servicing to a Toshiba Authorized

Service Center.

43) If you have the TV serviced:

•

Ask the service technician to use only replacement

parts specifi ed by the manufacturer.

• Upon completion of service, ask the service
technician to perform routine safety checks to

determine that the TV is in safe operating condition.

44) When the TV reaches the end of its useful life,
ask a qualifi ed service technician to properly
dispose of the TV.

52G0101A P02-05.indd 552G0101A P02-05.indd 5 1/6/09 4:00:04 PM1/6/09 4:00:04 PM

Introduction

6

Precautions

Choosing a location for your LCD TV

■ Retractable pedestal stand and locating the LCD TV

Observe the following safety precautions:

1) Ensure that unpacking and transfer of the unit is carried out by
two or more people.

2) Put the LCD TV on a large level area in a recumbent posture.

3) Grab the pedestal stand and lift the display up. Confi rm the pivot is
locked.

4) Place the TV on a sturdy, level surface that
can support the weight of the TV.

5) Be sure to secure the TV to a wall stud,
pillar, surface, or other immovable
structure. To secure the TV in this manner:
(1) attach a clip to an immovable structure,
then (2) pass a sturdy strap through the clip
and attach each end to the hooks located
at the back of the TV. Be sure to leave at least 4 inches between
the TV and the wall or similar structure for ventilation. See item
19, page 4 for additional details.

■ To fold the pedestal stand

1) Slide the lever on the back side of the pedestal stand to the left.

2) Lay the display down.

NOTE: Do not operate the LCD TV while the pedestal stand
is folded.

■ To Display your LCD TV using a Wall Bracket:

If you decide to wall mount your LCD TV, always use a UL Listed
wall bracket appropriate for the size and weight of the LCD TV (see
page 2):

1) CAUTION: Two people are required for installation.

2) Unplug and remove any cables and/or other component

connectors from the rear of the TV.

3) Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate bracket(s) are
attached to the wall and the back of the TV as described in the
instructions provided with the wall bracket.

4) After attaching the appropriate bracket(s) to the wall and the back

of the TV, remove the pedestal stand from the TV as described
below.

■ Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a fl at, cushioned

surface such as a quilt or blanket. Leave the stand protruding
over the edge of the surface.

NOTE: Extreme care should always be used when removing

the pedestal stand to avoid damage to the LCD panel.

2) Remove the two screws shown in the diagram below.

This will allow removal of the pedestal stand.

3) Once you have removed all two screws holding the pedestal

stand in place, remove the pedestal stand from the TV by sliding
the pedestal stand away from the TV.

Important notes about your LCD TV

The following symptoms are technical limitations

of LCD

Display technology and are not an indication

of malfunction;

therefore, Toshiba is not responsible

for perceived defects

resulting from these symptoms.

1) An after image (ghost) may appear on the screen if a fi xed,
non-moving image is displayed for a long period of time.
The after image is not permanent and will disappear in a short
period of time.

2) The LCD panel contained in this TV is manufactured using an
extremely high level of precision technology;

however, there may

be an occasional pixel (dot of light)

that does not operate properly

(does not light, remains

constantly lit, etc.). This is a structural

property of LCD

technology, is not a sign of malfunction, and is
not covered under your warranty. Such pixels are not visible
when the picture is viewed from a normal viewing distance.
Note: Interactive video games that involve shooting a “gun” type

of joystick at an on-screen target may not work on this TV.

Notes on handling

■ Do not subject the LCD panel to physical shock, such

as dropping

it. It may cause unit damage and malfunction.

■ When shipping the unit, the original shipping carton and packing
materials come in handy. For fully protection, repack the unit as it
was originally packed at the factory.

■ Do not use volatile liquids, such as insecticide, near the unit.
Do not leave rubber or plastic products in contact with the unit for
prolonged periods of time.
Doing so will leave marks on the fi nish.

■

The top and rear panels of the unit may become warm

after a long

period of use. This is not a malfunction.

■ When the unit is not in use, always remove the disc and turn off
the power.

Notes on locating the unit

■ When you place this unit near a TV, radio, or VCR, the playback

picture may become poor and the sound may be distorted. In this
case, place the unit away from the TV, radio, or VCR.

■ To avoid damage to this product, never place or store the

TV/DVD in direct sunlight; hot, humid areas; or areas subject to
excessive dust or vibration.

■ The socket-outlet must be installed near the unit and easily

accessible.

Back side of the pedestal stand

Slide the lever to the left

Two screws

52G0101A P06-07.indd 652G0101A P06-07.indd 6 1/5/09 3:01:07 PM1/5/09 3:01:07 PM

Introduction

7

On handling discs

Do not touch the playback side of the disc.

For example, handle the disc so that it is shown in
fi gure below.

Do not attach paper or tape to discs.

On cleaning discs

Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.

Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight

or near heat sources.

Do not store discs in places subject to moisture and

dust such as a bathroom or near a humidifi er.

Store discs vertically in a case. Stacking or placing

objects on discs outside of their case may cause
warping.

Playback side

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

DVD video disc

Track 1 Track 2 Track 3 Track 4 Track 5

Video CD/Audio CD

Precautions (Continued)/Notes on discs

Structure of disc contents

Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.

DVD video disc

Video CD/Audio CD

Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.

E

x

a

m

p

l

e

o

f

m

o

i

s

t

u

r

e

c

o

n

d

e

n

s

a

t

i

o

n

!

Optical pick-up

lens

Notes on moisture condensation

Moisture condensation damages the unit. Please
read the following carefully.

Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day and drops
of water form on the outside of the glass. In the same
way, moisture may condense on this unitʼs internal optical
pick-up lens, one of the most crucial internal parts of the unit.

■ Moisture condensation may occur in the following
situations:

When you move the unit from a cold area to a warm area.

When you use the unit in a room in which the heat

was just turned on.

When you use the unit in an area where cold air from

an air conditioner directly hits the unit.

When you use the unit in a humid area.

Wait!

Wall outlet

■ Never use the unit when moisture condensation

may occur

Using the unit when moisture condensation exists may
damage discs and internal parts. Connect the power
cord of the unit to the wall outlet, turn on the unit,
remove the disc, and leave it for two or three hours.
After two or three hours, the unit will have warmed up
and evaporated any moisture. Leaving the TV
connected to the wall outlet will help prevent moisture
condensation in the TV or DVD Player.

52G0101A P06-07.indd 752G0101A P06-07.indd 7 1/5/09 3:01:13 PM1/5/09 3:01:13 PM

8

Introduction

Playable discs

This unit can play the following discs.

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-ROM, CD­ ROM, Photo CD, etc., or non standardized discs even
if they may be labeled as above.

• Some CD-R/RWs cannot be played back depending
on the recording conditions.

• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).

• This unit can play an 8cm disc. Please do not use a
disc adapter. It may cause trouble.

• Please do not insert any disc of an irregular shape into
the unit, as it may interfere with the function of the unit.

You may not be able to remove it.

• Please do not use after market accessories, such as a

ring protector, as this may cause trouble with the
operation of the unit.

Because of problems and errors that can occur during the
creation of DVD and CD Software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that the
DVD player contained in this TV will successfully play
every disc bearing the DVD and CD logos.
If you happen to experience any diffi culty playing a DVD
and/or CD disc on the DVD player contained in this TV,
please contact Toshiba Customer Service.

is a trademark of DVD Format/Logo Licensing

Corporation.

About this ownerʼs manual

This ownerʼs manual explains the basic instructions of this
unit. Some DVD video discs are produced in a manner
that allows specifi c or limited operation during playback. As
such, the unit may not respond to all operating command.
This is not a defect in the unit. Refer to instruction notes of
discs.

The following symbol may appear on the TV screen during
operation.

It means that the operation is not permitted by the TV/DVD
or the disc.
For example, sometimes it is unable to stop the playback
of copyright message of the disc when the STOP (■)
button is pressed. Alternatively, this symbol may also
indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this unit is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not fi nd

1

or

ALL

, disc
playback will not be allowed by the player. (In this case,
the unit will display a message on-screen.)
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.

On Video CDs

This unit supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.

•

Video CD not equipped with PBC function (Version 1.1)

Sound and movie can be played on this unit in the same
way as a DVD.

•

Video CD equipped with PBC function (Version 2.0)

In addition to operation of a Video CD not equipped with
the PBC function, you can enjoy playback of interactive
software with search function by using the menu
displayed on the TV screen (Menu Playback). Some of
the functions described in this ownerʼs manual may not
work with some discs.

Disc Mark Contents

Disc
Size

Maximum

playback time

DVD
video
discs

Audio

+

Video

(moving

pictures)

12 cm

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc)

8 cm

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Video

CDs

DIGITAL VIDEO

Audio

+

Video

(moving

pictures)

12 cm

Approx. 74 minutes

(single sided disc)

8 cm

Approx. 20 minutes

(single sided disc)

Audio

CDs

Audio

12 cm

Approx. 74 minutes

(single sided disc)

8 cm

Approx. 20 minutes

(single sided disc)

DivX

®

Audio

+

Video

(moving

pictures)

12 cm

It depends on DivX®

quality

8 cm

The following discs are also available.

DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA,

JPEG or DivX® format

Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

Notes on copyright

The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.

Notes on discs (Continued)

52G0101A.indb 852G0101A.indb 8 1/5/09 3:02:00 PM1/5/09 3:02:00 PM

Introduction

9

Contents

Introduction

SAFETY INSTRUCTIONS .................................4

Precautions........................................................6

Notes on discs ...................................................7

Contents ............................................................9

Identifi cation of controls ..................................10

Connections

Antenna connections ...................................... 14

Cable TV connections .................................... 15

Connecting to optional equipment .................. 16

Power source.................................................. 21

Basic setup

Auto Setup ...................................................... 22

Setting the language....................................... 23

To memorize channels.................................... 24

TV operation

TV operation ................................................... 27

Labeling channels........................................... 29

Labeling video inputs ...................................... 30

Setting the V-Chip........................................... 31

Setting the closed captions............................. 35

CC advanced .................................................. 36

Adjusting the picture preference ..................... 37

Picture settings ............................................... 37

Viewing the wide-screen picture formats ........ 38

Film Mode ....................................................... 39

DNR ................................................................ 39

Picture control adjustment in the PC mode .... 40

Sound control adjustment ............................... 41

Selecting Stereo/Second Audio Program (SAP) .... 41

Selecting the audio language ......................... 42

Selecting the HDMI audio input source .......... 42

Using the aspect feature................................. 43

Turning off the built-in speakers

(26LV610U only) ............................................. 44

Checking the Digital-signal strength ............... 44

Setting the Logo Light..................................... 45

Setting the Auto Shut Off ................................ 45

Resetting your settings ................................... 46

Basic playback

Playing a disc ................................................. 47

Advanced playback

Zooming.......................................................... 50

Locating desired scene................................... 50

Marking desired scenes.................................. 51

Repeat playback ............................................. 52

A-B Repeat playback ...................................... 52

Program playback........................................... 53

Random playback ........................................... 53

Changing angles..............................................54

Title selection ...................................................54

DVD menu .......................................................54

Changing soundtrack language .......................55

Subtitles ...........................................................55

Disc status .......................................................56

To turn off the PBC ..........................................56

MP3/WMA/JPEG/DivX®

and Audio CD operation ..................................57

Repeat, random and program playback

using fi le browser.............................................61

Function setup

Customizing the function settings ....................63

Temporary cancel the rating level

by DVD disc .....................................................68

Others

Understanding the Power Return feature ........69

Troubleshooting ...............................................69

Reception disturbances ...................................71

Language code list ..........................................72

Specifi cations ..................................................73

Limited United States Warranty .......................74

52G0101A.indb 952G0101A.indb 9 1/5/09 3:02:02 PM1/5/09 3:02:02 PM

10

Introduction

Identification of controls

Speaker

Front

POWER indicator

22

Remote sensor

13

Side

Left Side

EJECT button

48

CHANNEL

27

PLAY button

47

VOLUME (+/–) buttons

27

CHANNEL

27

■ STOP button

47

MENU button 23 63

INPUT/ENTER button

16

POWER button

22

Adjusting the angle of the base

(except 26LV610U)

You can adjust the
angle of the
TV-screen for 3°
forward or for 10°
backward from
vertical angle.
Hold the base of the
TV while adjusting
the angle.

Approx. 10°

Approx. 3°

Disc slot

47

52G0101A.indb 1052G0101A.indb 10 1/5/09 3:02:03 PM1/5/09 3:02:03 PM

Introduction

11

Rear

HEAD PHONE jack

28

COLORSTREAM HD/AUDIO IN jacks 17

S-VIDEO/VIDEO/AUDIO IN jacks 16

17

PC MONITOR IN jack

20

PC AUDIO IN jack

19

20

HDMI IN jack

19

COAXIAL DIGITAL AUDIO
OUT jack 18

19

Antenna jack 14

15

Illustration of 26LV610U

AC INPUT 21

Illustration of 19LV610U/

19LV611U/22LV610U/22LV611U

AC INPUT 21

HDMI 1 IN jack

19

HDMI 2 IN jack

19

S-VIDEO IN jack

17

HDMI 1/PC AUDIO IN jack 19

20

AUDIO IN (L/R) jacks 16

17

VIDEO IN jacks 16

17

COLORSTREAM HD IN jacks

17

Antenna jack 14

15

PC IN jack

20

AUDIO OUT (L/R) jacks

20

COAXIAL DIGITAL AUDIO
OUT jack 18

19

AC INPUT COVER

(19LV610U/

19LV611U only)

52G0101A.indb 1152G0101A.indb 11 1/5/09 3:02:04 PM1/5/09 3:02:04 PM

12

Introduction

SLOW ( ) button

Direction buttons ( / / / )

EJECT button

48

DISPLAY button

Numbered buttons (0

-

9)

5628

31

SUBTITLE button

55

INPUT button

16

ZOOM button

50

MENU button

23

SETUP button

63

53

PLAY MODE button

52 56

PLAY button

47

PAUSE button

48

TOP MENU button

54

RETURN button

GAME button

6358

TV/DVD button

47

27

Direct channel selection
buttons (0

-

9)

27

CH RTN button

CLOSED CAPTION button

28

SKIP ( ) button

49

REV button

49

FF button

49

49

16

POWER button

22

JUMP button

50

27

Direct channel selection button ( )

AUDIO SELECT button

55

MUTE button

28

54

EXIT/CANCEL button

22

35

SKIP ( )button

49

STOP button

47

49

REPEAT A-B button

52

PIC SIZE button

38

ENTER button

22

SLEEP button

28

*DVD MENU button

27

VOL +/– button

22

SLOW ( ) button
MARKER button

54

51

ANGLE button

CH / button

Remote control

The instructions in this manual describe the function on the remote control. See the page in for details.

*DVD MENU button

Use the DVD MENU button to
display the menu included on
many DVD video discs.
To operate a menu, follow the
instructions in “DVD menu.” 54

Identification of controls (Continued)

52G0101A.indb 1252G0101A.indb 12 1/5/09 3:02:08 PM1/5/09 3:02:08 PM

Introduction

13

Replace the compartment
cover.

Install two “R03/AAA” batteries
(supplied), paying attention to
the polarity indicated in the
battery compartment.

Open the battery compartment
cover in the direction of the
arrow.

1

23

• Aim the remote control at the remote sensor and press control buttons to operate.

•

Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.

Caution:

• Never throw batteries into a fi re.

Note:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal area.

•

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with
applicable laws and regulations.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with

new ones.

• When necessary to replace batteries in the remote control, always replace both batteries with new ones.
Never mix battery types or use new and used batteries in combination.

•

Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended

period of time. This will prevent battery acid from leaking into the battery compartment.

Inserting batteries

Operation

Approx. 5 meters

52G0101A.indb 1352G0101A.indb 13 1/5/09 3:02:08 PM1/5/09 3:02:08 PM

Connections

14

75 ohm coaxial cable
(not supplied)

300-75 ohm matching
transformer (not supplied)

300-75 ohm matching
transformer (not supplied)

UHF 300 ohm
twin-lead wire
(not supplied)

VHF 300 ohm
twin-lead wire
(not supplied)

UHF 300 ohm
twin-lead wire
(not supplied)

VHF 75 ohm
(not supplied)

Antenna

jack

Antenna

jack

Antenna

jack

Combiner
(not supplied)

Antenna

jack

Combiner
(not supplied)

Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack on the back
of the TV/DVD.

If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, use the 300-75 ohm matching
transformer (not supplied).

Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching transformer
(not supplied). Attach the transformer to the combiner,
then attach the combiner to the antenna jack on the
back of the TV/DVD.

Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack on the back
of the TV/DVD.

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CABLE), see page

15

for Cable TV connections.

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

52G0101A P14-29.indd 1452G0101A P14-29.indd 14 1/5/09 3:02:49 PM1/5/09 3:02:49 PM

Connections

15

For basic cable service not requiring a converter/descrambler
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the TV/DVD.

75 ohm
coaxial cable

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require
the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available
from the cable company or an electronics supply store). Follow the connections shown below. With the switch in
the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A”
position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to tune scrambled channels.

Incoming 75 ohm

Cable TV

75 ohm cable to

TV/DVD

Antenna

jack

Antenna

jack

Converter/

descrambler

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)
and use the converter/descrambler box to select channels.

For subscribers to basic cable TV service

For subscribers to scrambled cable TV service

For subscribers to unscrambled basic cable TV service with scrambled
premium channels

Splitter

B

A

Incoming
75 ohm
Cable TV

A/B switch

75 ohm cable
to TV/DVD

Converter/

descrambler

Antenna

jack

Cable TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.

52G0101A P14-29.indd 1552G0101A P14-29.indd 15 1/5/09 3:02:51 PM1/5/09 3:02:51 PM

Connections

16

To playback from the VCR, connect the VCR to the TV/DVD as shown.
Select the “Video” (“Video1”) by pressing INPUT repeatedly.

You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes.

1. Connect a TV Game to the TV/DVD.

2. Select the Game mode by pressing GAME. The Game mode screen appears.

• If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen
appears on the screen.

Camcorder

To Audio/Video OUT

Audio/Video cable (not supplied)

Audio/Video cable (not supplied)

To Audio/Video OUT

INPUT

Connecting to a VCR

Connecting to a TV Game

Connecting to optional equipment

You can enjoy VCR, camcorder or TV game with connection to external input.

Note:

• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of
different types of signal generated by these devices and subsequent hook-up variations required, they have not all
been included in the suggested connection diagrams. Youʼll need to consult each componentʼs Ownerʼs Manual
for additional information.

• Interactive video games that involve shooting a “gun” type of joystick at on-screen target may not work on this
TV/DVD.

: Signal fl ow

: Signal fl ow

: Signal fl ow

Using the audio/video inputs

Press INPUT to view a signal from another device connected to your TV/
DVD, such as a VCR player. You can select TV, Video (Video1, 2),
ColorStream HD, HDMI (HDMI1, 2) or PC depending on which input jacks
you used to connect your devices.

Press INPUT on the remote control to display the current signal source.
To change the input source, press INPUT again or press Number buttons.

To Audio/Video OUT

(yellow)

(red)

(white)

Audio/Video cable (not supplied)

VCR

To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Select the “Video” (“Video1”) by pressing INPUT repeatedly.

Connecting to a camcorder

Back side

GAME

0-7

Back side

Back side

(yellow)

(red)

(white)

Source Selection

[0-5]:Select

1.Video

2.ColorStream HD

3.HDMI

4.PC

5.DVD

0.TV

(26LV610U only)

Source Selection

[0-7]:Select

1.Video1

2.Video2

3.ColorStream HD

4.HDMI1

5.HDMI2

6.PC

7.DVD

0.TV

(yellow)

(red)

(white)

To AUDIO/VIDEO IN

To AUDIO/VIDEO IN

To AUDIO/VIDEO IN

52G0101A P14-29.indd 1652G0101A P14-29.indd 16 1/5/09 3:02:52 PM1/5/09 3:02:52 PM

Connections

17

Connecting to an optional equipment with S-video output

If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the rear of the TV/DVD, you must also
connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video sig­nal. The audio signal is separated.
Select the “Video” (“Video1”) by pressing INPUT repeatedly.

Note:

When the S-Video cable and the standard video cable are connected at the same time, the S-video cable takes
precedence.

•

Ex. VCR with S-Video

To S-VIDEO OUT

To Audio (L/R) OUT

To S-VIDEO IN

Audio cable (not supplied)

S-Video cable (not supplied)

Connecting an optional equipment with ColorStream

®

(Component video) output

Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component
video compatible DVD player, such as a Toshiba DVD player with ColorStream

®

can greatly enhance picture

quality and performance.
Select the “ColorStream HD” by pressing INPUT repeatedly.

Ex. DVD player with Component video

Audio cable (not supplied)

Component video cable

(not supplied)

To Audio (L/R) OUT

To Component Video OUT

To COLORSTREAM
HD AUDIO (L/R) IN

To COLORSTREAM HD

(Y, Pb, Pr) IN

When using the Component video cable,
an Audio cable must be connected to
COLORSTREAM HD AUDIO(L/R) IN jacks.

Note:

• The ColorStream

®

(component video) inputs on this unit are for use with devices that output 480i, 1080i inter-

laced signals and 480p, 720p progressive signals.

• Refer to the ownerʼs manual of the connected equipment as well.

• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.

• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
unit away from the tuner and radio.

: Signal fl ow

: Signal fl ow

(playback)

(red)

(white)

To AUDIO (L/R) IN

Back side

Back side

(red)

(white)

52G0101A P14-29.indd 1752G0101A P14-29.indd 17 1/5/09 3:02:53 PM1/5/09 3:02:53 PM

Connections

18

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital
recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifi er equipped with a Dolby
Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefi t of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the
Dolby Surround mark.

Connecting to an amplifi er equipped with a Dolby® Digital decoder

Manufactured under license
from Dolby Laboratories.
Dolby and the double-D symbol
are trademarks of Dolby
Laboratories.

Amplifi er equipped with a

Dolby Digital decoder

To COAXIAL
type digital
audio input

Connecting to an amplifi er equipped with a DTS® decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefi t of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.

Manufactured under license
under U.S. Patent #: 5,451,942 &
other U.S. and worldwide
patents issued & pending. DTS
and DTS Digital Out are
registered trademarks and the
DTS logos and Symbol are
trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights
Reserved.

Amplifi er equipped with

a DTS decoder

To COAXIAL
type digital
audio input

75 Ω coaxial cable (not supplied)

75 Ω coaxial cable (not supplied)

Back side

To COAXIAL DIGITAL
AUDIO OUT

: Front speaker
: Rear speaker
: Sub woofer

: Center speaker
: Signal fl ow

*

This section uses the following reference mark.

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifi er equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Connecting to an amplifi er equipped with an MPEG audio decoder

Amplifi er equipped with an

MPEG2 audio decoder

To COAXIAL
type digital
audio input

75 Ω coaxial cable (not supplied)

Connecting to optional equipment (Continued)

You can enjoy high quality dynamic sounds by connecting the
TV/DVD to optional audio equipment.

Back side

To COAXIAL DIGITAL
AUDIO OUT

Back side

To COAXIAL DIGITAL
AUDIO OUT

52G0101A P14-29.indd 1852G0101A P14-29.indd 18 1/5/09 3:02:55 PM1/5/09 3:02:55 PM

Connections

19

Amplifi er equipped with a

Digital audio input

To COAXIAL
type digital
audio input

75 Ω coaxial cable (not supplied)

Connecting to an amplifi er equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifi er equipped with a digital audio input and speaker
system (right and left front speakers).

Note: PCM audio is limited to DVD or CD playback.

Note:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the ownerʼs manual of the connected equipment as well.

• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet

before making any connections.

•

The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiverʼs volume to a moderate listening level.

Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

• Turn off the amplifi er before you connect or disconnect the TV/DVDʼs power cord. If you leave the amplifi erʼs power on, the speakers

may be damaged.

Back side

To COAXIAL DIGITAL
AUDIO OUT

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied)

Audio cord (not supplied)

HDMI cable (type A connector)

(not supplied)

To DVI output

To HDMI out

or

HDMI device

DVI device

To HDMI IN

To HDMI 1/PC

AUDIO IN

Connecting to an HDMI or a DVI device

Back side

Note:

You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI1 audio input
source” on page

42

). Otherwise you will only see the image with no sound.

When you connect the HDMI to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to
use separate analogue leads to transfer the audio signals.
The HDMI-2-connection has no analogue audio input. If you want to connect a DVI appliance to it, you will not hear a sound through
the TV loud speakers. If you want to hear the sound of a DVI appliance through the TV loud speakers then connect the DVI
appliance to HDMI-1. (26LV610U only)

•

•

•

About HDMI

HDMI (High Defi nition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specifi cation. HDCP is used to protect digital content transmitted
and received by DVI-compliant or HDMI-compliant displays.

HDMI has the capability to support standard, enhanced, or high­defi nition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.

52G0101A P14-29.indd 1952G0101A P14-29.indd 19 1/5/09 3:02:56 PM1/5/09 3:02:56 PM

Connections

Connecting to optional equipment (Continued)

Connections

20

Connecting to a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the

VGA connector PC

MONITOR on the rear of the

TV/DVD

. Attach the connectors firmly with the screws on the plug.

In case of a Multimedia computer,
connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of
the TV/DVD. You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If
you use HDMI-to-DVI cable, please connect audio cord as same way as VGA cable.
Select “PC” by pressing INPUT repeatedly (When you use HDMI cable, Select “HDMI”).
Switch on the computer. The TV/DVD can operate as the computer monitor

Monitor Display modes

MODE Resolution Refresh rate
VGA 640x480 60/72/75Hz
VGA 720x400 70Hz
SVGA 800x600 56/60/72/75Hz
XGA 1024x768 60/70/75Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz

To return to normal mode
Press INPUT again.

Note:

The on-screen displays will have a different appearance in PC mode than in TV mode.
If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV/DVD-screen.

•

•

VGA cable (not supplied)

To HDMI IN

To PC IN

Audio cord (not supplied)

Back side

HDMI-to-DVI adapter cable (not supplied)

Connecting an analog audio system (26LV610U only)

This connection allows you to use external speakers with an external audio amplifier to adjust the sound level.

To control the audio:

Turn on the TV and the stereo amplifier.
Turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page

44

.)

Note: To hear sound when using an external audio amplifier, the volume of both
the TV and the amplifier must be set to a reasonable listening level.

Back side

Analog audio amplifi er

To AUDIO OUT (L/R)

To AUDIO IN

or

To HDMI 1/PC AUDIO IN

52G0101A P14-29.indd 2052G0101A P14-29.indd 20 1/5/09 3:02:57 PM1/5/09 3:02:57 PM

Connections

Power source

21

Power source

Note:

Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER.

•

•

•

•

To use AC power source

Connect the AC cord plug into this TV/DVD’s AC INPUT jack.
Connect the AC cord into an AC outlet.

1.

2.

AC cord (supplied)

AC 120V, 60Hz

Wider Hole
and Blade

AC Outlet

52G0101A P14-29.indd 2152G0101A P14-29.indd 21 1/5/09 3:02:58 PM1/5/09 3:02:58 PM

22

Basic setup

Auto Setup

Auto Setup

The Auto Setup function helps to install your TV/DVD easily.
It leads you the Language selection, Air/Cable selection and Automatic
channel search.

IMPORTANT: Make sure that the antenna or cable TV system
connection is made!

POWER

EXIT/CANCEL

/ / /

ENTER

1

To turn on the TV/DVD, press POWER.

POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.

•

2

Auto Setup menu appears on the screen.
Press ▲ or ▼ to select “Language”, then
press ◀ or ▶ to select your desired language.

Automatic Search

Auto Setup

Language

Signal Type Cable

Start

English

: Adjust

: Select

3

Press ▲ or ▼ to select “Signal Type”, then
press ◀ or ▶ to select “Air” or “Cable”.

Automatic Search

Auto Setup

Language

Signal Type Cable

Start

English

: Adjust

: Select

Air - VHF/UHF channels
Cable

- Cable TV channels

4

Press ▲ or ▼ to select “Automatic Search”,
then press ▶ or ENTER.

Auto Setup

Language

Signal Type Cable

Start

English

: Select

Automatic Search

ENTER:Set

5

Now the “Automatic Search” starts.

Auto Setup

Language

Signal Type Cable

Start

Digital Channel Found :

Programming Now

Analog Channel Found : 0

0

English

EXIT : End

Automatic Search

If you press EXIT/CANCEL, the Automatic
Search stops and changes to the TV screen.
After the starting setup is completed, the TV

channel appears on the screen.

•

•

Note:

The Auto Setup function will work only when you
press POWER for the first time.
The process of “Automatic Search” may take 15 to
30 minutes to complete, depending on your regional
cable service.

•

•

52G0101A P14-29.indd 2252G0101A P14-29.indd 22 1/5/09 3:02:58 PM1/5/09 3:02:58 PM

23

Basic setup

Setting the language

Setting the language

This TV/DVD can display the on screen language in English, French or
Spanish.
Select the language you prefer fi rst, then proceed with the other menu options.

EXIT/CANCEL

1

To turn on the TV/DVD, press POWER.

POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.

•

2

Press MENU. The TV menu screen will
appear. Press ▲ or ▼ to select “Setup”, then
press ▶ or ENTER.

Picture

Audio

Channel

Lock

Setup

Main Menu

: Select ENTER:Set

3

Press ▲ or ▼ to select “Language”.

Video Label >>

Auto Shut Off

Off
On

Aspect

On

TOSHIBA Logo Light
Reset >>

Setup

Closed Caption >>

Language English

: Adjust

: Select

4

Press ◀ or ▶ to select the desired language:
English, French (Français) or Spanish
(Español).

5

Press EXIT/CANCEL to return to the normal
screen.

Note:

If no buttons are pressed for more than about 60
seconds, the MENU screen will return to normal
operation automatically.
The TV section has its own menu and the DVD
section also has its own menu

63

.

•

•

MENU

/ / /

ENTER

POWER

52G0101A P14-29.indd 2352G0101A P14-29.indd 23 1/5/09 3:03:00 PM1/5/09 3:03:00 PM