Toastmaster RRFP1A-T User Manual

TM
FOOD PROCESSOR
OWNER'S MANUAL
Model RRFP1A/T
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put cord, plug, or appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact Consumer Service for examination, repair or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by the manufactur­er may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Do not let cord contact hot surface, including the stove.
11. Keep hands and utensils away from moving blades or discs while pro­cessing food to reduce the risk of severe injury to persons or damage to the Food Processor. A scraper may be used, but must be used only when the Food Processor is not running.
12. Blades are sharp. Handle carefully.
13. To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl properly in place.
14. Be certain Cover is securely locked in place before operating appli­ance.
15. Never feed food by hand. Always use food pusher.
16. Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY.
2 23
Additional Important Safeguards
1. All users of this appliance must read and understand this Owner's Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC electri­cal outlet only.
3. Do not leave this appliance unattended during use.
4. If this appliance begins to malfunction during use, immediately turn the unit OFF and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.
5. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water.
6. To reduce the risk of injury to persons or property, never use this appli­ance in an unstable position.
7. Do not use this appliance for other than its intended use.
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Electric Power
If the electrical circuit is overloaded with other appliances, your appliance may not operate. It should be operated on a separate electrical circuit from other appliances.
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating from the finish of the
countertop or tabletop or other furniture, place NON-PLASTIC coasters or placemats between the appliance and the finish of the countertop or tabletop.
Failure to do so may cause the finish to darken, permanent blem­ishes may occur or stains can appear.
322
Getting to Know Your Rachael Ray
RRFP1A/T Food Processor
1. Food Processor Power Base
2. Interlock Mechanism, Lower
3. Handle
4. Interlock Mechanism, Upper
6
5
4
5. Locking Extension
6. Food Pusher (P/N 71163)
7. Cover with Feed Chute (P/N 71162)
8. Rubber Seal Ring (P/N 71201)
9. Processing Bowl (P/N 71161)
10. Drive Shaft
11. Speed Control Dial
12. Cord
13. Cord Storage (not shown)
14. Spatula (P/N 71164)
7
3
2
1
13
4 21
10
8
9
14
11
12
Getting to Know Your
P
0FF
1
2
RRFP1A/T Attachments
1. Chopping Blade
1
2
4
3
5
6
7
8
CONTROL DIAL
with Indicator
Light
(P/N 71165) Stainless steel blade designed for cutting and kneading.
2. COARSE Shredding Blade 'C' (P/N 71167)
Stainless steel shredding blade.
3. Cheese Grating Blade 'CHEESE' (P/N 71198)
Stainless steel blade designed to finely grate fresh cheese.
4. THIN Slicing Blade 'F'
(P/N 71168) Stainless steel slicing blade.
5. THICK Slicing Blade 'C'
(P/N 71169) Stainless steel slicing blade.
6. Blade Holder
(P/N 71170) Designed to hold a Shredding or Slicing or Cheese Blade, with finger holes.
7. Blade Holder Stem (P/N
71183) Fits over Drive Shaft to support Blade Holder.
8. Storage Tray
(P/N 71199) (Shown with attachments in place) Holds 4 unused Blades and Blade Holder Stem.
P - Pulse
OFF 1 - Low Speed 2 - High Speed
5
Before First Use
WARNING: Blade Attachments are very sharp. Use extreme care when handling Blades. Failure to do so can result in personal injury.
1. Carefully unpack the Food Processor. The Storage Tray is packed with 4 Blades and the Blade Holder Stem. Wash the Processing Bowl, Cover with Feed Chute, Food Pusher, Spatula and all Attachments in warm soapy water. Rinse and dry thoroughly.
2. Wipe the Food Processor Power Base with a soft, moistened cloth. Never
immerse the Food Processor Power Base in water or any other liquid.
3. Store spare Blades and Blade Holder Stem in Storage Stand (see illustration) and keep nearby for easy accessibility.
Assembly Instructions
1. Before assembling the Food Processor ensure that the Cord is unplugged.
2. Place the Food Processor Power Base facing you on a dry, level surface.
3. Make sure the Rubber Seal Ring is in position, flat and not twisted, in the upper groove along the top of the Processing Bowl.
4. Place the Processing Bowl onto the Power Base. The Bowl will only sit cor­rectly when the handle is positioned to the left at the ten o'clock position.
5. Turn the Processing Bowl counter clockwise to engage the locking tabs and the Power Base Interlock Mechanism.
6. Determine which processing blade is to be used; Chopping, Shredding, Slicing. or Grating. If shredding, slicing or grat­ing, insert the appropriate blade into the top side of the Blade Holder, mak­ing sure it snaps in place. See illustra­tion.
Rubber
Seal Ring
6 19
Assembly Instructions (Cont.)
Note: If the Processing Bowl and the Cover are not correct­ly assembled, the Upper and Lower Safety Interlock Mechanism will not be closed and the Food Processor will not function.
7. To chop foods, fit the Chopping Blade over the Drive Shaft. To slice, shred or grate cheese, use the Blade Holder Assembly (with the proper Blade Attachment). To use the Blade Holder, first slip the Blade Holder Stem over the Drive Shaft. Using the finger holes, attach the Blade Holder (sharp cutting edge up) to the Blade Holder Stem. .
8. Place the Cover on the Processing Bowl with the lock­ing extension at approximately the nine o'clock position. Rotate the Cover counter clockwise to engage the locking tabs and the Upper Interlock Mechanism in the Processing Bowl handle.
Note: If the Lid is difficult to assemble, make sure the Rubber Seal Ring fits flat and not twist­ed, in the upper groove along the top of the Processing Bowl. Remove Ring and reattach if necessary.
Locking Extension
9. Insert the Food Pusher in the Feed Tube on the Cover.
10. Make sure the Speed Control knob is in the OFF position, then plug the Cord into a 120V AC power outlet.
11. The Food Processor is now ready to begin use.
7
Instructions for Use
Slicing, Shredding and Grating
CAUTION: Always unplug Food Processor from outlet before installing or removing attachments.
CAUTION: Use extreme care when handling the Slicing, Shredding or Grating Blades. Do not touch the cutting edges with your fingers. The cutting edges are very sharp and can cause injury if touched.
1. Make sure the unit is unplugged. Remove Storage Tray from the Processing Bowl as outlined in the BEFORE FIRST USE section of this Owner's Manual. Keep the Storage Tray out of the way, where it cannot be tipped over and make sure the Tray and all Blades are out of the reach of children. Attach the Processing Bowl to the Power Base. See ASSEMBLY INSTRUCTIONS for details.
2. Insert a Slicing, Shredding or Grating Blade into the Blade Holder. See Assembly Instructions for specific details.
3. Insert the Blade Holder and Stem in the Processing Bowl over the Drive Shaft.
4. Place the Cover on the Processing Bowl with the locking extension at approximately the nine o'clock position. Turn the Cover counter clock­wise to engage the locking tabs and the Upper Interlock Mechanism in the Processing Bowl handle.
Note: If the Lid is difficult to assemble, make sure the Rubber Seal Ring fits flat and not twisted, in the upper groove along the top of the Processing Bowl. Remove Ring and reattach if necessary.
Note: If the Processing Bowl and the Cover are not correctly assembled, the Upper and Lower Safety Interlock Mechanism will not be closed and the Food Processor will not function.
5. Make sure unit is in the OFF position; then plug the Food Processor into a 120V AC electrical outlet.
6. Remove the Food Pusher and insert the food to be processed into the Feed Chute (see Food Processing Hints for food preparation details). Turn the Speed Control Dial to desired speed; the Indicator Light will come on. Use even, constant pressure on the Food Pusher to feed food into the Feed Chute. If processing slows or seems labored, increase the Speed Control Dial from 1 to 2 or turn to OFF and select the Pulse setting. Note: Do not use excessive force or you will damage the Food Processor.
Caution: Never use fingers or other utensils to push food down the Feed Chute. Always use the Food Pusher.
8 17
Loading...
+ 16 hidden pages