Toastmaster 1750CAN, 1750 User Manual

All-In-One Food

Preparation System

USE AND CARE GUIDE

MODEL 1750 AND 1750CAN

READ AND SAVE THESE INSTRUCTIONS

WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. Please follow all safety instructions.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

◆ Read all instructions before using appliance.

◆ To protect against risk of electrical shock, do not immerse blender

body, mixer attachment head, blending body, chopper drives, cord, or plug in water or other liquids. See User Maintenance Instructions.

◆ This appliance should not be used by children and care should be

taken when used near children. Do not leave the appliance unattended, especially when children are present.

◆ Unplug from outlet when not in use, before cleaning and before

attaching and detaching accessories.

◆ Avoid contacting moving parts. Keep hands, hair, clothing, as well

as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the Food Preparation System.

◆ Do not operate this or any appliance with a damaged cord or plug,

or after the appliance malfunctions or has been dropped or damaged in any manner. Contact consumer service for return authorization, for examination, repair or electrical or mechanical adjustment.

◆ Do not place on or near a hot gas or electric burner, or in a heated

oven.

◆ Do not attach or remove accessories or other attachments while

the Food Preparation System is in use.

◆ Before using this appliance, make sure that accessories are firmly

attached to the Blender Body.

◆ The use of attachments not recommended or provided by the

appliance manufacturer may cause fire, electric shock or injury.

◆ Do not use outdoors or while standing in a damp area.

◆ Do not let cord hang over edge of table or counter, or touch hot

surfaces, including the stove.

◆ Blades are sharp, handle with care.

◆ When mixing liquids with the blending stick, use a tall container

or make small quantities at a time to reduce spillage. Do not mix hot liquids.

◆ Do not immerse the blending stick in food or liquid above the

maximum indicator line.

◆ Keep hands and utensils out of the container while blending to

prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used; but only when the unit is not running.

◆ Remove beaters, dough hooks, or whisk from mixer attachment

head before washing them.

◆ Use extreme care when handling the double blade knives. Do not

touch the blades with your fingers. The blades are very sharp and can cause injury if touched.

◆ Keep hands and utensils away from the double blade knife while

chopping food to reduce the risk of severe injury to persons or damage to the Food Preparation System. A scraper may be used but only when the food chopper is not running.

◆ Place double blade knife over the stem in the chopper container

before attaching chopper drive.

◆ Be certain chopper drive is securely in place before operating

chopper.

◆ This chopper is intended for processing small quantities of food. It

is not intended to prepare large quantities of food at one time.

◆ Do not use this appliance for other than its intended use.

SAVE THESE INSTRUCTIONS

All-In-One Food Preparation System Use and Care Guide

CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use. If an extension cord is required, special care and caution is necessary. Also the cord must be: (1) marked with an electrical rating of 125 V, and at least 10 A., 1250 W., and (2) the cord must be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally.

If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.

Polarized Plug (Model 1750)

The model 1750 appliance has a polarized plug, (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

Grounded 3-Conductor Plug (Model 1750CAN)

The model 1750CAN appliance is equipped with a grounded-type 3-wire cord (3-prong plug). This plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature. If the plug should fail to fit the outlet, contact an electrician to replace the obsolete outlet. Do not attempt to defeat this safety feature.

ELECTRIC POWER: If electric circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electric circuit from other appliances.

This product is for household use only.

Getting to Know Your All-In-One Food Preparation System

1. Blender Body

2. Speed Control Button “I” Low

3. Speed Control Button “II” High

4. Release Button

5. Blending Stick (P/N 70584)

6. Mixing/Measuring Beaker Lid (P/N 70586)

7. Mixing/Measuring Beaker (P/N 70587)

8. Mini-Chopper Container Lid (P/N 70588)

9. Low Speed Chopper Drive (P/N 70589)

10. Mini Double-Blade Knife (P/N 70590)

11. Mini-Chopper Container (P/N 70591)

10.

11.

16.

12.

17.

13.

18.

14.

15.

12. Large Chopper Container Lid (P/N 70588)

13. High Speed Chopper Drive (P/N 70592)

14. Large Double-Blade Knife (P/N 70593)

15. Large Chopper Container (P/N 70594)

16. Mixer Attachment Head (P/N 70585)

17. Stainless Steel Wire Beaters (P/N 70595)

18. Stainless Steel Dough Hooks (P/N 70596)

19. Stainless Steel Wire Whisk (P/N 70597)

19.

All-In-One Food Preparation System Use and Care Guide

Introduction

Congratulations on your purchase of the Toastmaster®All-In-One Food Preparation System. This versatile appliance quickly converts from blender to mixer to chopper by removing and replacing attachments with the push of a button. The durable stainless steel wire beaters, dough hooks and wire whisk will provide years of use.

Before First Use

CAUTION: Use extreme care when handling the double blade knives. Do not touch the blades with your fingers. The blades are very sharp and can cause injury if touched.

1. Carefully unpack the blender body and all accessories.

2. Wash the mixing/measuring beaker, mini-chopper container, large chopper container, lids, mini and large double-blade knives, stainless steel beaters, dough hooks and wire whisk in warm soapy water. Rinse and dry thoroughly.

3. Never immerse the blender body, mixer attachment head, blending stick or chopper drives in water or any other liquid. If necessary, these attachments can be wiped clean with a moistened cloth. The blending stick can be washed under running water, but be careful not to allow water to enter the hollow shaft.

4. Always dry the blending stick thoroughly so that no water can enter the blender body.

Instructions for Use

CAUTION: Always unplug blender body from outlet before installing or removing attachments.

The blender body may be connected to the blending stick, the mixer attachment head, the high speed chopper drive or low speed chopper drive.

Using the Blending Stick

Use the blending stick to blend liquids, eggs, batters or drinks.

1. Place the blender body over the blending stick and carefully push down until it “clicks” into place. Gently turn the blender body at the same time if necessary.

2. Place ingredients into the mixing/measuring beaker, container, bowl or pan which is sufficiently tall to avoid splashing.

3. Plug the blender body into a standard 120V AC electrical outlet.

4. Dip the blending stick as deeply as possible into the container and turn on the blender body by pressing down on one of the speed control buttons. Do not turn blender body on before inserting into container as this may cause splashing.

NOTE: Do not immerse the blending stick in food or liquid above the maximum indicator line.

5. When using the blending stick, work through the ingredients with a gentle up and down movement of the blender body.

6. When blending task is complete, release the speed control button and remove plug from electrical outlet.

7. Carefully remove the blending stick by pushing down on release button.

8. Clean unit and attachments as instructed in “User Maintenance Instructions.”

Speed Control Buttons

Blender Body

Release Button

Blending Stick

Figure 1

All-In-One Food Preparation System Use and Care Guide

Mixer/Blending Guide

Speed Task / Procedure

IBlend liquid ingredients together

I Stir dry ingredients into liquids, instant puddings II Mix cake mixes and batters II Cream sugar and butter II Whip egg whites, whipping cream or potatoes

Using The Mixer Attachment Head

Use the stainless steel beaters for general mixing needs, such as

preparing cake and cookie batters or to mash potatoes. Use the

stainless steel whisk for whisking foods such as egg whites and sauces.

Use the stainless steel dough hooks for kneading yeast breads.

NOTE: When using these accessories, do not operate the appliance

for more than three minutes at a time, after which appliance should

be allowed to cool down. These accessories are for light duty mixing

only.

1. Place the blender body over the mixer attachment head and carefully push down until it “clicks” into place. Gently turn at the same time if necessary.

2. Push the desired attachment stem into mixer attachment head and rotate until it locks into position. The attachment will fit snugly into the hole.

NOTE: The stainless steel dough hooks must be attached only one way. The dough hook with the metal washer-ring on the stem must be inserted into the larger hole of the mixer attachment head. See Figure 2. NOTE: The stainless steel wire whisk may be inserted into either hole, and the stainless steel beaters may be placed into either hole.

3. After installing attachment(s), gently tug each attachment stem to be sure it is secure.

CAUTION: Use either both beaters or both dough hooks. Do not attempt to switch out dough hooks, beaters or wire whisk. This could damage the food preparation system.

4. Plug the blender body into a standard 120V AC electrical outlet.

5. Hold the unit firmly and press the desired high or low speed control button.

Dough Hook

WasherRing

Figure 2

Larger Hole Opening

Mixer Attachment Head

+ 17 hidden pages