Toastmaster 1529 Operation Manual

For TOASTMASTER®:

Model 1529

FOOD WARMER

OWNER'S
MANUAL

Pn: 2M-38343
November 2, 2009

St. Louis, MO 63143

[phone]

Model 1529

Food Warmer

TABLE OF CONTENTS

ABOUT YOUR TOASTMASTER® EQUIPMENT .................................................... 2

RECEIPT AND INSTALLATION ............................................................................. 3

OPERATING INSTRUCTIONS .............................................................................. 4

MAINTENANCE AND CLEANING GUIDE ............................................................. 4

REPLACEMENT PARTS LIST ............................................................................... 5

ELECTRICAL SCHEMATICS ................................................................................. 6

i

ILLUSTRATIONS AND SCHEMATICS Model 1529 OWNER'S MANUAL

AVAILABILITY AND TESTING:

A prospective customer may see a unit in operation as follows:

• At a dealer’s showroom,

• At an existing installation,

• At the TOASTMASTER® manufacturing facility.

If contacted, TOASTMASTER® will provide information on the nearest location and
availability. In the event that a customer desires to test a unit at his place of business
arrangements can be made based on a specifically defined program. If a customer wants
to try a specific product arrangements can be made to determine what conditions are
necessary for baking or cooking so the customer can determine the suitability for his or
her program. Technical product information can be generated by customer-requested
testing of various products and equipment.

CONSTRUCTION:

The 1529 model is constructed of stainless steel both inside and outside. Aluminized steel
is used on the outside back and bottom. All of the exterior shell or frame members and the
internal shells are welded to provide long life construction, durability and rigidity. Unit is
thoroughly tested before shipment. On-going research and development projects are used
to introduce the latest and most dependable parts.

SHIPMENT:

TOASTMASTER ® equipment is usually shipped directly from the factory or delivered
from a dealer, unless sold at a show or after a test or demonstration. Unless otherwise
agreed to by TOASTMASTER® freight is paid by the buyer F.O.B. from the
TOASTMASTER® manufacturing plant in Menominee, Michigan. Shipping time may
vary depending upon the original shipping point, time of the year, and shipper or shippers
used.

TOASTMASTER® works closely with all of its customers in tracing shipments to speed
deliveries and minimize handling. TOASTMASTER® employs the latest accepted
packaging standards to ensure that your equipment arrives in excellent condition.
However, damage may still occur due to accident or mishandling by the freight company.
For this reason it is necessary for the receiving party to immediately do a thorough
inspection of the equipment when it arrives.

TOASTMASTER

The TOASTMASTER® Model 1529 is electrically powered and operated, and generally
does not require a hood. However, the final decision as to hood requirements will always
rest with your local authorities. This unit consists of a stainless steel well that is heated by
a tubular heating element. This unit is designed to accommodate standard food inserts.
This model is designed for wet applications and may be used as a single unit or banked
with other units. It is equipped with a pre-set thermostat, “on-off” switch and “dry
receptacle” alarm. It is designed to be operated with a volume of water in the well.

®

MODEL 1529:

2