Model T116
T116 IB P1
Color: Black, material: 210gsm2, Nov 2, 2007
size: 420mm x 165mm
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
Installing Backup Batteries
Note: After installing the backup batteries and reading the Maintenance
section, plug the AC line cord correctly into a wall outlet.
Battery Backup
If the backup batteries have been installed and a power failure occurs or
the AC cord is accidentally disconnected, the current time and alarm time
settings will be temporarily maintained.
If the backup batteries have not been installed or are dead, when the AC
power resumes the display will show 12:00 and you must reset the time
and alarm settings.
1. Open the battery compartment cover
located on the bottom of the unit.
2. Install 2 “AAA” size batteries into the
compartment, making sure that the + and
– polarities match the diagram next to the
compartment.
3. Close the battery cover.
Getting Started
Battery Backup
Alarm 1 Button
Controls and Indicators
Alarm 2 Button
Setting Clock Time and Calendar
Setting Clock Time
Press and hold the Time Set Button until the display flashes. (If no buttons are
pressed within approx. ten seconds, the display will stop flashing and return to
normal mode.)
When display is flashing, press the + Button and - Button to adjust to the correct
time. Press and hold the buttons to advance/reverse rapidly. A PM Indicator
will appear to the left of the current time; there is no AM indicator.
Press the Time Set Button when the correct time is displayed. 2 beeps will
confirm the clock setting is completed.
Setting Calendar
Once the time is set in clock setting mode, the year will flash on the display. If
needed, press the + Button and - Button to adjust the year. Press the Time
Set Button when the correct year is showing. Two beeps will confirm the year
is set. The date will flash on the display.
If needed, press the + Button and - Button to adjust the date. Press the Time
Set Button when the correct date is showing. Two beeps will confirm the date
is set.
Snooze/Dimmer Button
Advance
Button
Reverse
Button
Alarm 1 Button
After setting the alarm time(s), you can press the Alarm 1 or Alarm 2 button to
arm or disarm the associated alarm. The Alarm Indicator Icon(s) will appear on
the display, showing that the alarm is armed and will sound at the displayed
time.
After the alarm sounds, press the Alarm Reset Button to turn it off and automatically
reset it for the same time the following day.
To turn off the alarm without setting it for the following day, just press the armed
alarm button again. The Alarm Indicator Icon will disappear.
NOTE: The alarm will sound for approximately 1 hour and then turn off
automatically. This cycle will repeat every 24 hours unless the controls are
changed.
During normal operation, press the Snooze button once to adjust the LCD
backlight brightness to Hi, Med, Lo or Off.
Setting Clock Time and Calendar
Setting Clock Time
Press and hold the Time Set Button until the display flashes. (If no buttons are
pressed within approx. ten seconds, the display will stop flashing and return to
normal mode.)
When display is flashing, press the + Button and - Button to adjust to the correct
time. Press and hold the buttons to advance/reverse rapidly. A PM Indicator
will appear to the left of the current time; there is no AM indicator.
Press the Time Set Button when the correct time is displayed. 2 beeps will
confirm the clock setting is completed.
Setting Calendar
Once the time is set in clock setting mode, the year will flash on the display. If
needed, press the + Button and - Button to adjust the year. Press the Time
Set Button when the correct year is showing. Two beeps will confirm the year
is set. The date will flash on the display.
If needed, press the + Button and - Button to adjust the date. Press the Time
Set Button when the correct date is showing. Two beeps will confirm the date
is set.
Wake to Alarm
After setting the alarm time(s), you can press the Alarm 1 or Alarm 2 button to
arm or disarm the associated alarm. The Alarm Indicator Icon(s) will appear on
the display, showing that the alarm is armed and will sound at the displayed
time.
After the alarm sounds, press the Alarm Reset Button to turn it off and automatically
reset it for the same time the following day.
To turn off the alarm without setting it for the following day, just press the armed
alarm button again. The Alarm Indicator Icon will disappear.
NOTE: The alarm will sound for approximately 1 hour and then turn off
automatically. This cycle will repeat every 24 hours unless the controls are
changed.
Snooze Operation
During normal operation, press the Snooze button once to adjust the LCD
backlight brightness to Hi, Med, Lo or Off.
T116 IB P2
Color: Black, material: 210gsm2, Nov. 2, 2007
size: 420mm x 165mm
A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as
SDI Technologies), warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of 90 days from the
date of original purchase.
Limited 90-Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as
SDI Technologies), warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of 90 days from the
date of original purchase.
Limited 90-Day Warranty Information
Loading...