IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS ................................................................................. 3
WHAT’S INCLUDED ........................................................................................................................................ 3
WATCH FEATURES AND BUTTON OPERATION ............................................................................................. 3
WEARING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+ ............................................................................... 4
USING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+ ..................................................................................... 4
WATER & SHOCK RESISTANCE ...................................................................................................................... 5
ON THE WATCH ............................................................................................................................................. 6
SETTING THE TIME/DATE .......................................................................................................................... 6
SYSTEM SETUP ........................................................................................................................................ 12
USER SETUP ............................................................................................................................................. 13
ABOUT ..................................................................................................................................................... 31
HELP ........................................................................................................................................................ 31
FCC NOTICE (U.S.) / IC NOTICE (CANADA) .................................................................................................. 32
DECLARATION OF CONFORMITY ............................................................................................................. 33
Press Mode button repeatedly to step through modes: Chrono, Interval Timer, Timer, Review, Setup,
Appointment, Alarms, Sync.
Press Mode button to exit current mode and return to Time of Day.
WEARING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+
The TIMEX IRONMAN Classic 50 Move+ can be worn on either wrist, just close the strap buckle in a
comfortable position and you are ready to Move!
USING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+
Not only is your watch a robust chronograph training watch with 50 lap memory storage, your watch
also includes a built in accelerometer which detects your all-day activity. The built in sensor will
automatically be turned on after you manually set the time on your watch (after reset) or after your first
sync with the TIMEX Connected app. The watch will track and display: steps, distance and calorie
expenditure and will store the last 7 days of activity data, however you can enjoy virtually unlimited
storage by transferring your data to the free TIMEX Connected app.
NOTE: Your TIMEX IRONMAN Classic 50 Move+ will automatically reset your activity tracking data at
midnight.
GETTING STARTED
Setup of the TIMEX IRONMAN Classic 50 Move+ can be done on the watch itself or through the use of a
compatible mobile device.
To see if your device is compatible, visit: http://www.timex.com/classic50move
Your TIMEX IRONMAN Classic 50 Move+ is powered by a user replaceable coin cell battery (CR2025),
however Timex strongly recommends that a retailer or jeweler replace the battery. The battery in
your TIMEX IRONMAN Classic 50 Move+ will last approximately 15 months. Battery life estimates are
based on certain assumptions regarding usage; battery life may vary depending on actual usage.
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM
CHILDREN.
WATER & SHOCK RESISTANCE
Your watch is 100 meter (328 ft) water resistant, 160 pounds per square inch absolute.
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.
1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on watch face or case back. Watches are designed to pass ISO
test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.
Your TIMEX IRONMAN Classic 50 Move+ is equipped with three alarms. When alarms are activated, the
Indiglo® night-light and alarm icon will flash and you will get an audible alert; push any button to silence
those alerts. If no button is pressed the alarm will sound for 20 seconds and repeat once after 5
minutes.
To set your alarms:
1. Push the Mode button until ALARMS is on the top of the display.
2. The top banner on your Classic 50 Move+ will quickly change from displaying ALARMS to
displaying ALM 1.
3. Push the Set/Recall button.
4. Push the Start/Split and/or the Stop/Reset buttons to adjust the hour digits.
5. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the minute
digits.
6. Push the Mode button, use the Start/Split button to select AM or PM.
7. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to select the alarm
Electroluminescent technology used in the INDIGLO night-light illuminates the entire watch face for easy
viewing at night and in low light conditions.
Push the INDIGLO button to illuminate watch display for 3-4 seconds when the watch is not in the
Setting state, or 6-7 seconds otherwise.
NIGHT-MODE® FEATURE
The NIGHT-MODE feature causes any button press to automatically activate the INDIGLO night-light for
3-4 seconds when the watch is not in the Settings state, or 6-7 seconds otherwise. When the NIGHTMODE feature is active, you will see a moon icon on the display.
Push and hold the INDIGLO button for 4 seconds to activate or deactivate the NIGHT-MODE feature.
NOTE: NIGHT-MODE will automatically deactivate after 8 hours.
VIEWING THE ACTIVITY TRACKER DATA
1. From the Time of Day screen, push the Stop/Reset button to scroll through the available activity
tracking data (STEPS, # of steps taken, DIST, total distance covered, CALS, number of calories
burned, DATE, Day of week and date).
NOTE: Your TIMEX IRONMAN Classic 50 Move+ will automatically reset the activity data (set all fields to
zero) at midnight each night.
CHRONOGRAPH
Use the Chronograph mode to record a workout. Chronograph mode counts up by hundredths of a
second up to one hour, then by seconds up to 100 hours. The Stopwatch icon will be flashing on the
display during a workout and will be solid when the workout is paused or stopped. Chrono will continue
running even if you exit Chrono mode.
To set the display format, push the Set/Recall button. Push the Start/Split button to change the format
then push the Set/Recall button to exit back to Chrono mode.
1. From the Time of Day screen, push the Mode button until you see CHRONO.
2. Push the Start/Split button to start the workout.
3. To take a split, push the Start/Split button. Lap and split times will be displayed with the lap
number.
4. Repeatedly pushing the Set/Recall button during the workout will display the following data (lap
timer, steps, distance and calorie expenditure) on the top banner.
5. To stop or pause the workout, push the Stop/Reset button.
6. To resume the workout, push the Start/Split button.
7. After completing the workout, push the Stop/Reset button to stop the workout.
8. To save the Chrono workout, push and hold the Set/Recall button for two seconds.
9. To discard the Chrono workout, push and hold the Stop/Reset button for two seconds.
10. To delete the latest stored workout, push and hold the Stop/Reset button for three seconds. To
delete all stored workouts, push and hold the Stop/Reset button for six seconds.
NOTES:
Upon entering Chrono mode, a message will show on the watch face that prompts you to the
number of laps that can be stored before Chrono memory is filled; if the Chrono memory is full
you will see “MEMORY FULL” displayed. See the Review section of this manual for information
on deleting workouts.
When splits are taken, times are frozen on the display for 10 seconds. Push the Mode button to
release the display and return to the Chrono display.
Deleting of stored workouts can only be done in Chrono mode, Review mode is only used for
viewing stored workouts. See step 10 above for instructions.
INTERVAL TIMER
You can set up an interval workout with 2 intervals. Each interval can time up to 23 hours, 59 minutes
and 59 seconds.
You can set up your interval workouts to repeat when a set of intervals is complete. Your TIMEX
IRONMAN Classic 50 Move+ will keep track of the repetitions for you and alert you when it is time to
end one interval and start the next.
Your watch can hold up to 5 interval workouts in the device memory. Interval workouts are stored with
the following information: total steps, total calorie expenditure, total distance covered, total time and
number of repetitions (if Intervals are set to Repeat at End).
1. From the Time of Day screen, push the Mode button until you see INTTMR.
2. Push the Set/Recall button to customize your interval workout.
3. Starting with INT 1, push the Mode button.
4. Push the Start/Split and/or Stop/Reset buttons to adjust the hours digits.
5. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
minutes digits.
6. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
7. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to select Repeat at
End or Stop at End. When appropriate selection is on screen, push Mode button.
Stop at End should be used when you DON’T want the interval to repeat.
Repeat at End should be used when you DO want the interval to repeat.
8. If you want your interval to include more than one segment, push the Start/Split button to make
adjustments to INT 2, then push the Mode button.
9. Push the Start/Split and/or Stop/Reset buttons to adjust the hours digit.
10. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
minutes digits.
11. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
seconds digits.
12. Push the Mode button, then push the Start/Split button to select Repeat at End or Stop at End.
When appropriate selection is on the screen, move to step 13.
Stop at End should be used when you DON’T want the interval to repeat.
Repeat at End should be used when you DO want the interval to repeat.
13. Push the Set/Recall button to save your Interval workout settings.
14. Push the Start/Split button to start the Interval workout.
15. During the workout, repeatedly push the Set/Recall button to scroll through the following data
on the top banner: interval number, steps, distance and calories burned.
16. Push the Stop/Reset button to stop the workout.
17. To save the Interval workout, push and hold the Set/Recall button for two seconds. If five interval workouts have already been stored in the watch memory, the oldest
stored Interval workout is deleted and the current workout data is stored.
18. To discard the Interval workout, push and hold the Stop/Reset button for two seconds.
19. To delete the latest stored interval workout, push and hold the Stop/Reset button for three
seconds. To delete all stored interval workouts, push and hold the Stop/Reset button for six
seconds.
NOTES:
Look for an hourglass icon to signify there is an interval workout running. A flashing icon means
the timer is running. A solid icon means the timer is paused.
Deleting of stored interval workouts can only be done in Interval Timer mode, Review mode is
only used for viewing stored interval workouts. See step 19 above for instructions.