This video is suitable for use on A.C. mains supply, 220-240 V - 50 Hz only.
It must not be connected to D.C. mains.
Note: The mains lead of the video is fitted with a moulded plug.
Because the lead is detachable and because it contains safety
components we cannot recommend re-wiring.
ENGLISH
Do NOT
mains socket as this could result in electric shock.
A fused plug must be fitted with a 3A fuse approved by ASTA or
BSI to BS 1362 and fuse covers must always be securely replaced.
If your Video Recorder does not work, the fuse may be blown.
under any circumstances plug the severed plug into any
The OFF button Bon the remote control does not completely disconnect
!
the unit from the mains supply but switches operating power on and off.
EN
I
Guarantee
10 cm
7 cm
10 cm
10 cm
7 cm
The guarantee certificate delivered with your video recorder mentions its type and
production number. Keep it with the invoice. They will be required to justify your
warranty rights.
• All repairs during the warranty period should be carried out by an authorised
technician representing our brand.
• All exceptions to this rule will lead to the cancellation of your warranty rights.
• Never open the appliance yourself, since this may be dangerous for you or
damage the equipment.
Thomson Multimedia is not liable if the video recorder is used other than in
accordance with this manual.
Precautions
Set up - Make sure the mains voltage in your home complies with that indicated on the
identification label on the back of your video recorder.
Install the video recorder horizontally, far from any heat sources (e.g. fireplace...) or
appliances producing high magnetic or electric fields.
If you place your video recorder in a specific unit, make sure there is enough
ventilation. Leave 7-10 cm around your video recorder as shown in the diagram below.
Use - If your video recorder or a tape has been kept in a cold place for some time, like
for example in a car boot in winter, wait approximately 2 hours before using your
video recorder. The openings above and below are for ventilation purposes. They
should not be blocked. In the case of a thunder storm, it is recommended to disconnect
the video recorder from the aerial socket.
This video recorder should under no circumstances be used for industrial purposes. It is
intended for domestic use only.
Cleaning - Use a soft, dry and clean cloth. Do not use any stripper, abrasive or solvent
products. If an object or liquid penetrates into the video recorder, disconnect it
immediately and have it checked by an authorised technician.
To avoid deterioration of your video recorder's heads, never use a cleaning tape.
Total or partial copying of recordings protected by copyright law, without explicit
authorisation from the copyright owners, constitutes a breach of the law.
Your remote control can be used to control certain
functions on most TV sets. Before using it, you need to
programme it with one of the codes listed on the next
page.
!
Depending on the type of TV set
you own, this remote control
may not be compatible or
certain functions may not be
available.
CONTROLLING THE TV SET
Pour commander le téléviseur, appuyez d’abord sur cette touche.
To control your TV set,
position the selector on
To switch your TV set on or off.
These keys are the same as
certain functions on your TV s
remote control (if it is our
brand).
tv
.
To increase
the image
size / zoom +.
To decrease
the image
size / zoom -.
To change
the channel.
To adjust the sound
volume.
To switch off the sound.
To switch the TV set on or
to select a channel.
These two
functions are
available on
THOMSON TV
sets only.
To select a SCART socket and
view the pictures of the AV unit
connected to this socket.
EN
2
-
+
SIZE AA 1,5 V 0%MERCURY
GREENELL
EXTRA HEAVY DUTY
-
+
SIZE AA 1,5 V 0%MERCURY
GREENELL
EXTRA HEAVY DUTY
Your remote control is a MULTI BRAND TV remote
controlller. Before controlling the TV functions, check
out the Brand Code (3 digits) from the table below and
carry out the following procedures.
key and enter 3 digits brand
codes.
Depending on your TV set
model, it may be necessary
to try several of the proposed
codes.
3 - Release the
menu
key.
Remark: Not all functions are
applicable depending on model of TV
brand used. Some old TV set cannot be
controlled by this remote control.
When changing batteries, the TV brand may require resetting again.
EN
3
CONTROLLING THE VCR
CONTROLLING THE VCR
Pour commander le téléviseur,
To control your VCR, position the selector on
appuyez d’abord sur cette touche.
vcr a
.
To start instant recording of what
you are watching (only with
compatible TV)
To add or
remove an
index
To double the
recording time of
a tape with LP
To switch the video
recorder on and off
To select the VPS
function
To display the
programme menu
To display the information
screen
To call up
the NAVICLICK menu
To display the subtitles
To navigate through the
menus and to validate
with OK
To display the SUMMARY
menu
To leave a menu at any
moment
To change the channel
The controls/functions below are also to be found
on the front of the video recorder
Reverse
Stop
Record
To select a channel. For 2digit channels, press 0/--
first (example: 0, 1, 2
for Pr12)
To select the AV units
connected to the
audio/video sockets
(AV1, AV2, AV3, AV4)
Forward
Play
Pause
EN
4
Point the remote control
towards the video recorder
when you press a key.
-
+
SIZE AA 1,5 V 0%MERCURY
GREENELL
EXTRA HEAVY DUTY
-
+
SIZE AA 1,5 V 0%MERCURY
GREENELL
EXTRA HEAVY DUTY
Your remote control is a MULTI-MAKE model which fits a great
number of VCR’s. Prior to controlling your VCR’s functions, note
down the code (3 digits) matching the make of your VCR and
follow the steps below.
Note: You may not be able to control all of the functions,
depending on the model and the make of your VCR. Some older
models are not compatible with this remote control.
STORING ANOTHER VCR CODE OR A THOMSON DVD CODE
Important: If you wish to control independently two video recorders of the makes
BRANDT, FERGUSON, NORDMENDE, SABA, TELEFUNKEN or THOMSON, prior to
carrying out steps 1, 2 and 3 described below, disconnect the set whose code you wish
to change from the mains. Enter the new code (usually 002) and then control the VCR
with this new code.
key and while
holding it down, key in the 3-digit
code corresponding to the make
of your VCR. Depending on the
VCR model you own, you may
have to try out several of the
codes proposed.
menu
3 - Release the
key.
ENGLISH
DVD: When the code 000 is entered, the remote control is configured for -
made DVD's. Refer to the user manual of your DVD to find out the key assignment.
When changing batteries, the TV brand may require resetting again.
EN
5
YOUR VIDEO RECORDER
RECORD
CONTROLLING THE VCR
THE KEYS ON THE FRONT
To switch the
video recorder
on and off.
See page 28
Add an index
Channel
selection
See page 29
Tape eject
Stereo/Mono
Selector
Source
selection
To double the recording
time of a tape with LP.
Accelerated play
Variable slow motion
Forward- Reverse
Play - Pause
Sound
dubbing
- Remove an index
(See page 20)
- Reset the counter
(in copy mode page 21,
in insertion mode page 29)
PLAY: Play
SR: Fast play
SM: Variable slow motion
PAUSE : Freeze frame
REC-P: Pause-record
REC: Currently recording
TIMER: Programmed recording
P
r
: Picture and sound from a TV channel
Au 1-2
Au 3
Au 4
SA
: AV1-AV2 -
AV unit connected to the SCART
sockets (AUDIO/VIDEO) on the back
of the video recorder.
: AV3 -
unit connected on the front of the
video recorder.
: AV4 -
connected to the cinch sockets
(AUDIO/VIDEO) at the rear of the
VCR.
:
Picture and sound from a satellite
channel
Picture and sound from an
Picture and sound from an AV
pictures and sound from a set
01 15 35 : Tape counter
09:53: Time
Display of the clock or of the time: the length of
the tape played since the beginning during
play or record, the time remaining until the end
of the tape (r) in STOP.
SP: Play/record at standard speed
(Standard Play)
LP: Play/record in long play (Long Play)
SLP: Very long play of an NTSC tape
(Super Long Play)
NTSC PAL :
VIDEO: The video recorder transmits the picture
16/9 : Play/record in 16/9 format
MESEC: Play/record in Mesecam
DECOD: A decoder or any other AV unit
A
VPS : The current programme is in VPS
PDC : The current programme is in PDC
NIC: Nicam sound
HIFI: Hi-fi sound
ii
1 : Left channel
2 : Right channel
LL
Play in NTSC for a PAL TV set
and the sound to the TV set
connected to the AUDIO/VIDEO 2
socket is on
: Presence of a tape
in the video recorder
: Mixed sound
: Mono track
The sound
proposed by the
channel or the tape
The video recorder automatically detects the
type of standard tape loaded (E30, 60, 120…).
When you call the information screen up, the
video recorder indicates the cassette type and
the time remaining until the end of the tape.
n the screen
O
EN
7
VIEWING
With the status key, you can select the image to be displayed on your TV
screen. Press this key successively to display:
(1) • the current TV programme image,
(2) • the VCR image including display of VCR status,
(3) • the VCR image,
(1) • the TV programme image…
When VCR is displayed on the screen, you’re watching the VCR image.
WATCHING EITHER A VCR OR TV CHANNEL
TV pictures
Video recorder
pictures with
video recorder
information
VCR
VCR
Video recorder
pictures without
video recorder
information
When pressing the status key, the name
of the current programme is displayed at
the bottom of the screen (provided that the
channel broadcasts Teletext).
The information depends on the operating
mode of the video recorder
(STOP, PLAY...).
EN
8
VHS
VHS
To view a tape and explore the recordings on it, freeze a
frame, find precise sequences with the fast search, rewind
to the start or the end of the tape.
VIEWING A TAPE
If you don't want this menu to come up every time you load
a tape, deactivate the option Tape library in thePREFERENCES menu (page 24). Refer also to pages 15 to
17, TAPE LIBRARY function.
ENGLISH
Play
If the picture is poor, check that the MESECAM
and S-VHS functions are disables (see page 22 menu PICTURE).
In case of poor quality PAL sources or old PAL
tapes, please turn MESECAM off.
Fast search
Press several times on the keys to vary the speed
and direction of the fast search.
Freeze frame - Pause
Press several times on this key to forward picture
by picture.
Variable slow motion
Press several times on the keys to vary the speed
and direction of the slow motion.
On your remote
Sur votre
télécommande
control
then
or
On the front side of
Sur la façade du
the video recorder
magnétoscope
Stop
Press the key.
Forward or reverse
Press several times on the keys.
Ejection of the tape
or
EN
9
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.