MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
HDMI
COAXIAL
S/PDIF
500 mA max.USB: 5 V
12 V 1.5 A,
18 W max.
MODEL DIGITAL HD SATELLITE RECEIVER THS817
MODEL DIGITAL HD SATELLITE RECEIVER THS817
13/18 V
400 mA
SAT IN
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL AR
USB
HDMI
COAXIAL
S/PDIF
ETHERNET
MODEL DIGITAL HD SATELLITE RECEIVER THS817
13/18 V
400 mA
SAT IN
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE
USB
HDMI
COAXIAL
S/PDIF
ETHERNET
13/18 V
400 mA
SAT IN
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
ETHERNET
HDMI
COAXIAL
S/PDIF
500 mA max.USB: 5 V
12 V 1.5 A,
18 W max.
MODEL DIGITAL HD SATELLITE RECEIVER THS817
SAT IN
13/18 V
400 mA
ETHERNET
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
HDMI
COAXIAL
S/PDIF
500 mA max.USB: 5 V
12 V 1.5 A,
18 W max.
Dieses Produkt wurde unter der Zuständigkeit der STRONG Group hergestellt und verkauft. THOMSON und
das THOMSON Logo sind Warenzeichen von Technicolor (S.A.) oder seinen Vertretern, welche unter lizenzierter
Jeder andere Produkt-, Service-, Firmen-, Handelsname sowie jedes andere Logo, auf die in diesem
Zusammenhang verwiesen wird, werden von Technicolor (S.A.) weder bestätigt, noch unterstützt.
Nutzung der STRONG Group geführt werden.
Vertreten durch STRONG Ges.m.b.H.
Franz-Josefs-Kai 1
1010 Wien, Österreich
Email: support_at@thomsonstb.net
28 Jan 2019 14:25
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright laws as
unpublished works. They are condential and proprietary to Dolby Laboratories. Their reproduction
or disclosure, in whole or in part, or the production of derivative works therefrom without the express
permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights
reserved.
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that this DVB-S receiver (radio-frequency reception equipment) is compliant with the Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.thomsonstb.net/en/doc
THOMSON is a trademark of Technicolor (S.A.) or its aliates used under license by STRONG Group.
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of
products may change. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories, ASTRA is a registered trade
mark of SES ASTRA, Irdeto is a registered trade mark of Irdeto Access B.V., the terms HDMI and HDMI High-Denition Multimedia
Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and
other countries. All other product names are trademarks or registered trademarks of their respective owners.
3.2 Optional connection via DiSEqC 1.0 switch for up to 4 LNBs 7
3.3 Connection to the Internet for RSS feeds and weather forecasts 7
3.4 Extended connections for the home entertainment 7
4.0 STARTING UP FOR THE FIRST TIME 7
4.1 Language and Video Settings 7
4.2 Antenna Setup 8
4.3 Channel list selection 8
4.4 Regional Channels 8
5.0 QUICK GUIDE TO USING YOUR RECEIVER 8
6.0 OPERATION 9
6.1 Changing channels 9
6.2 Info Banner 10
6.3 Selection of audio language 10
6.4 Teletext 10
6.5 Subtitles 10
6.6 Changing the video settings 11
6.7 EPG (Electronic Programme Guide) 11
7.0 MAIN MENU 11
7.1 Installation 11
7.2 Channels 14
7.3 Settings 16
7.4 Multimedia 18
7.5 Update 19
7.6 CA Menu 21
7.7 Network 21
8.0 TROUBLESHOOTING 22
9.0 TECHNICAL SPECIFICATIONS 23
2
1.0 SAFETY INSTRUCTIONS
Read all of the instructions before operating the device. Keep these instructions well for later use.
- Only use attachments/accessories specied or provided by the manufacturer (such as the exclusive
supply adapter, battery etc.).
- Please refer to the information on the product enclosure for electrical and safety information before
installing or operating the apparatus.
- To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
- The ventilation should not be impeded by covering the ventilation openings with items, such as
newspaper, table-cloths, curtains, etc.
- The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such
as vases, shall be placed on the apparatus.
- The mark indicates a risk of electric shock.
- To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the
installation instructions.
- Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent
types.
- The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, re or the like.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one‘s hearing.
- In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
- The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable.
When not in use and during movement, please take care of the power cord set, e.g. tie up the
power cord set with cable tie or something like that. It shall be free from sharp edges or similar
which can cause abrasion of the power cord set. When put into use again, please make sure the
power cord is not damaged. The absence of a light indication on the apparatus does not mean that
it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must
be pulled out.
- Attention should be drawn to environmental aspects of battery disposal.
- No naked ame sources, such as lighted candles, should be placed on the apparatus.
-To prevent the spread of re, keep candles or other open ames away from this product at all
times.
-Equipment with this symbol is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth.
Precautions
- Never try to open the device. It is dangerous to touch the inside of the device due to high voltages
and possible electrical hazards. Opening the device will void the warranty of the product. Refer all
maintenance or servicing to suitably qualied personnel.
- When you are connecting cables, be sure that the device is disconnected from the mains supply
voltage. Wait a few seconds after switching off the device before you move the device or disconnect
any equipment.
- It is a necessity that you only use an approved extension and compatible wiring that is suitable for
the electrical power consumption of the installed equipment. Please ensure that the electrical power
supply corresponds with the voltage on the electrical identication plate at the back of the device.
Operating Environment
- Do not install this equipment in a conned space such as a bookcase or similar unit.
- Do not use the set near damp, and cold areas, protect the set from overheating.
- Keep away from direct sunlight.
- Do not use the set near dust place.
- Do not attach candle to accessible opening area, to avoid ammable foreign material from entering
the device.
English
3
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
1.1 Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure
that all the parts are included and keep the packaging away from children. We recommend that you
keep the carton during the warranty period, to keep your device perfectly protected in the event of
repair or warranty.
1.2 Equipment Set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
- Refer to the user manual of your TV and your antenna.
- Make sure that the SCART/HDMI cable and outdoor components are in a good condition and the
SCART/HDMI connections are well shielded and from good quality.
This user manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
Move to Represents a menu item within a screen.
(Bold characters)
(Italiccharacters)
1.3 Accessories
- Installation instructions
- 1x remote control unit
- 2x batteries (AAA type)
- 1x power adapter 12 V DC, 1,5 A
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. LSD-NiMH; „ready to use“ and similar) types with low selfdischarge to ensure long time operation of remote control.
NOTE: For the appropriate usage with this device, use only power adapters as
- Model: TB-AS120150E6xR; Manufacturer: Ten Pao Electronics (Huizhou) Co., Ltd.
- Model: CY-AS120150E5xR; Manufacturer: Jiangsu Chenyang Electron Co., Ltd.
The usage of other power adapters may cause damage to the device. Such damage is not covered
under warranty.
listed below (in case of a necessary exchange):
1.4 Usage of external USB devices
- It is recommended to use USB 2.0 or higher storage devices. If your device is not compatible to USB
2.0 specications, multimedia functions or software update might not work properly.
4
- If you are going to use external USB HDD (Hard Disk Drive) please consider that it might be the
case that the power specications exceed the supported output of your receiver (5 V/500 mA). If so,
please connect your USB HDD to an according external power adapter.
- We cannot guarantee compatibility with all types of USB storage devices.
- It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver. We will
not take responsibility for any loss of information or circumstances caused by loss of information.
- For a proper performance with this receiver your USB device must be formatted to FAT32.
- Playback of les cannot be guaranteed although extensions are listed, as it depends on the codec,
data bit rate and resolution (all MPEG codec formats are supported).
2.0 YOUR RECEIVER
2.1 DEFAULT PIN-CODE: 0000
2.2 Front Panel
1. IR Sensor Receives the RCU commands.
2. Indicator LED GREEN indicates that the receiver is currently ON, RED indicates
3. STBY/ON Switches the receiver ON or into Standby.
4. USB To connect your USB storage device for multimedia functions or
2.3 Rear Panel
1. SAT IN To connect to the LNB of your satellite antenna for reception of
2. IR To connect the IR extender (not included)
3. Ethernet To connect to to your home network via switch, router or modem.
4. HDMI To connect to the HDMI input of your TV set using a good quality
5. S/PDIF (coax.) To connect to a digital amplier or home theatre set.
6. TV SCART To optionally connect to your TV set using a SCART cable.
7. Power adapter To connect to the original included main power adapter (Input 100
2.4 Remote Control
1. q Switches the receiver On/Standby
2. ! Mutes audio output of the receiver in every mode incl. videotext,
3. OPT Opens the settings for TV format, aspect ratio and resolution
4. TEXT Opens the videotext if available
5. SUB Shows the list of DVB-subtitles if available
6. Gives direct access to mails from your broadcaster
7. 0~9 Channel selection or value input
8. TV/R Toggles between TV and RADIO mode
9. AUDIO Opens the list of audio languages
10. VOL+/VOL- Increases/decreases the volume in all modes (with TV picture in BG/
11. 9 Opens the recently watched channel list or switches between the
12. FAV Opens the favourite list selection if previously congured
13. CH+/CH- Channel up/down
that the receiver is currently in Standby mode.
software update.
satellite broadcast signal.
HDMI cable.
~240 V 50~60 Hz/ Output 12 V DC
the symbol will not be shown within menu mode
Videotext)
two last previously watched channels*
).
English
Fig. 1
Fig. 2
Fig. 3
5
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.