Telefunken TF-DVBT220 User Manual [ru]

MULTIMEDIA PLAYER WITH DVB-T2 RECEIVER
МУЛЬТИМЕДИЙНЫЙ ПЛЕЕР
С DVB-T2 ПРИЕМНИКОМ

TF-DVBT220

Instruction manual

Руководство по
эксплуатации

Table of contents

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Important safeguards
Utilization of the product

Connection

Connection

Operation

Control elements

Front panel

Rear panel
Remote controller

Changing the battery
General operation
OSD operation

Installation

Program

Picture

Channel

Time

Option

USB
USB information

PVR and EPG

Time Shift

General information

Troubleshooting
Accessories
Supported formats
Specifications

2
3
3
3
4
4
5
5
5
5
6
6
7
8
8

8

9
9

9
9

10
10
11
11
12
12
13
13
14

2

Before you start

Important safeguards

• To prevent risk of fire or electric shock,
avoid merging the unit into the water or under
conditions of high humidity.

• Switch off the device from the socket, if
you’re not going to use it for a long time.

• Do not place objects on the device.

• Place the unit in a dry and ventilated area.
Eliminate proximity to heaters, do not expose
to sunlight, mechanical vibration, humidity and
dusty environment.

• It is possible to use a small amount of
neutral detergent to clean the device.

• Never use abrasive materials or organic
substances (alcohol, gasoline, etc.) to clean
the device.

• For repair and maintrnance contact only
authorized service centers.

• Before connecting the device to the mains,
please make sure the network cable can be
easily disabled at any time.

• Unplug from the mains and from the cable
television antenna, unless you intend to use it
for a long time, or before a thunderstorm. Do
not touch the unit, power cord and antenna
cable during a thunderstorm!

• Before you turn on the device, please
check the reliability of its connection to the
power supply and other devices.

• This unit can not receive television signals
during the movement of the vehicle.

• After prolonged exposure to cold, before
turning on leave the device for 1 hour at a
room temperature.

Utilization of the product

If you want to dispose of this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.

Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.

Before you start

Before using this product, carefully read
the manual. After you read, save it for future
use. If necessary, contact your local dealer for
service.

All the illustrations in this manual are
schematic images, which may differ from
actual objects.

3

Connection

Connection

Connection

Antenna input

• Connect an external DVB-T/T2 antenna

(cable) connector to the antenna input RF IN.

The signal in the block cable antenna
can fail to contain DVB-T/T2 signal due to the
carrier frequency altered by the cable network
operator.

In order to receive digital air TV signal
use an indoor or outdoor UHF antenna. Specify
the possibility and quality of digital air signal
with your local digital TV service providers. The
absence of a stable TV signal in your area can­not be a reason for returns or refunds without
an additional test of TV signal reception in your
area.

To increase the reception quality of
the state digital air television in rural areas or
at significant distances from a broadcasting
center we recomment using individual active
outdoor UHF antennae with a high resistance
factor, and placing them at maximum possible
heights.

Power adaptor input

•

Connect the DC power adaptor to this

input and plug it into the electrical outlet.

Loop output

• Connect the LOOP OUT jack to TV's

antenna input using a special adapter (not
included) for supplying an analog TV signal.

CVBS output

• Connect the yellow composite

video output to the composite video input on
your TV using an RCA cable.

HDMI-out

• If your TV has an HDMI video input,

connect it to an HDMI output of this unit using
an HDMI cable (included).

S/PDIF output

• Connect the coaxial digital audio

output S/PDIF to the input of an amplifier to
transmit the audio signal to the amplifier using
a special coaxial cable (not included).

Stereo audio output

• Connect the left (white) and right (red)

terminals of the stereo audio output to the
corresponding audio inputs on your TV using
an RCA cable.

4

4

Controllers

Operation

Front panel

1 2 3 4 5 6 7 8

1. USB port

2. POWER button

3. MENU button

4. CH- button

5. CH+ button

6. OK button

7. VOL+ button

8. VOL- button

Rear panel

14

Operation

15

12

13

11

10

9

9. Antenna input

10. Antenna loop output

11. USB port

12. HDTV output

13. S/PDIF coaxial output

14. CVBS video output

15. Right composite audio output

16. Left composite audio output

17. DC 5V adapter socket

16

17

5

5

Operation

Operation

Remote controller

REC: Begin to record the viewed program
RED (TTX): Function key ( TeleText switch)
GREEN (SUB): Function key (Subtitle switch)
YELLOW (ZO
BLUE (TIMER): Function key (Enter Schedule menu)
EPG: Show Electronic Program Guide (EPG)
INFO: Shows current channel’s information
UP: Channel change, or move cursor up
DOWN: Channel change, or move cursor down
L EFT: Move focus left. (Also VOL-)
RIGHT: Move focus right. (Also VOL+)
OK: Confirm
MENU: Show main menu or back to full screen play program

status from main menu or sub-menu

EXIT: Exit from current open menu
FAV: Display the favorite channel list
IPTV: function not available in this model.
VOL +/-: Volume control.
PAGE +/-: Page UP/DOWN.
0-9: Enter the channel’s number
RECALL: Switch back to previous channel
AUDIO: Switch among left audio/right audio/stereo

OM): Function key (Zoom)

POWER: Power ON/Standby the receiver
MUTE: Mutes the sound

FORMAT: Quick change receiver's output resolution
ASPECT: Switch Aspect Ratio quickly
TV/RADIO: Switch between TV and Radio mode

MEDIA: Enter PVR Media

: Fast backward to view the current playing file or
channel

: Fast forward to view the current playing file or
channel

(PREV): Go to the previous recorded file, and play it
(NEXT): Go to the next recorded file, and play it

TIMESHIFT: Begin to timeshift

(PLAY/PAUSE): Pause when you play a recorded
program or skip when you are recording

■(STOP): Stop record, timeshift or stop play recorded file

6

1. Remove the battery compartment cover

on the back of the RC.

2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

Operation

General operations

STANDBY

When this unit is connected to the mains,
it goes into operation mode. When the unit is
running, press STANDBY button to turn the
device into sleep mode. In sleep mode, press
STANDBY button on the remote or press and
hold this button on the panel to turn the device
from sleep mode.

INFO

When viewing a TV channel, press this
button to display/hide the menu pages
containing various information about the current
channel (frequency, reception level etc.).

EPG

Press EPG button to display the menu of
the electronic TV guide (Electronic Program
Guide), which displays the schedule of
programs for a certain period of time for each
available channel. Using this function, you can
easily find programs you are interested in. Use
UP/DOWN cursor buttons to select the desired
TV program. Use LEFT/RIGHT cursor buttons
to switch pages of the interactive program
guide.

EPG-information cannot work if the

service is not provided by operator.

AUDIO

Press AUDIO to select the audio language
or audio channel, if this choice is supported by
the current channel.

CH+/CH-

Press these buttons to select the previous or
next channel.

Cursor

Press these buttons to navigate through the
various menus.

OK
Press this button to confirm the selection

options in the menu.

VOL-/VOL+
Press these buttons to adjust the sound

volume level.

The number buttons

Press number buttons to enter the channel
number you want or other numbers (such as
passwords, play time, etc.).

REV/FWD

When playing a media file, press these
buttons for fast forward or backward playback.

PLAY/PAUSE
When playing a media file, press this button to
start or pause the playback.

Red/Green/Yellow/Cyan buttons

Press the colored buttons to perform various
operations in the edit menu of channels,
teletext recording.

MUTE

Press this b

TTX

Press this button to enable or disable the
Teletext (Teletext is not supported by some TV
channels).

REC

When a USB drive is connected to this unit,
while watching TV channels press REC to
start recording video from the channel to USB.
Press STOP button to stop recording.

u

tton to enable/disable the sound.

Operation

7

7

Operation

if this choice is supported by the current
channel.

radio.

channel.

buttons to select previous/next file.

to stop playback.

Operation

SUB
Click this button to select subtitle language,

RADIO
Press this button to switch between TV and

RECALL

Click this button to select the last-viewed

PREV/NEXT
When playing a media file, press these

STOP
When playing a media file, press this button

Installation

OSD Language

Country

Channel Search

EXIT

Return

•

OSD Language: select the language of the

ОК

Confirm

system menu.

•

Country: select your country.

•

Channel Search: press OK to start
automatic channel search.

Program

OSD operation

1. Press MENU button to enter the setting

menu displa

2. Press LEFT/RIGHT cursor buttons on the

RC to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC to select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the

RC to adjust the selected parameter.

6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.

in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

yed on the screen.

Some menu items may be in grey color,

Installation

When you start the unit for the first time, or
after resetting it to factory defaults, you will see
the Installation menu on the screen.

8

8

Program Edit
EPG
Sort
LCN

EXIT ОК

Return Confirm

•

Program Edit: Enter password

(0000

00) to access the channel editor menu.

Program

You can edit the channel list using the following

functions:

favourite, move,

skip,

lock, delete.

Favourite: Select the program you want to
add to your list of favouites and press the
FAV button.

Move: Select the program that you want to
move — press the Red button to mark the
program — press UP/DOWN to move it up and
down the list and press OK to confirm.

Skip: Select the program you want to skip
and press the Green button to skip it.

Lock: Choose a channel and press the
Yellow button on the RC; The channel will be
locked. You must enter the password

(000000 by default) to unlock it.

Operation

Delete: Choose a channel and press the
Blue button on the RC; Press OK to confirm.
The channel will be deleted.

• EPG: See «General operations» program

for more details about Electronic Program
Guide.

•

Sort

Adjust the way the channels are sorted.

• LCN
Set logical channel number on/off.

Picture

Picture

Aspect Ratio
Resolution
TV Format
Video Output

EXIT ОК

Return Confirm

•

Aspect Ratio: 4:3 LB/4:3 PS/16:9 FIT/16:9

LB.

• Resolution: 480i/480p/576i/576p/720p/

1080i/1080p/Auto.

•

TV Format: PAL/NTSC/Auto.

•

Video output: select composite (CVBS)

or HDMI output.

Channel Search

•

Antenna Power: select to enable an

external active antenna (if installed).

Time

Time Offset
Country Region
Time Zone
Sleep

EXIT ОК

•

Time Offset: set the GMT time zones

automatically or manually.

•

Country Region: select your region time zone if

Time Offset is set to auto.

•

Time Zone: Input current date if Time Offset is

set to manual.

•

Sleep: select time period after which

the unit will automatically switch to standby mode.

Time

Return Confirm

Option

Option

OSD Language
Subtitle Laguage
Audio Language

Digital Audio

Operation

Return

Channel Search

ОК

Confirm

Auto Seach

Manual Search

Country

Antenna Power

EXIT

•

Auto Search: automatically search for

available channels and save them.

•

Manual Search: manually seach for each

channel and save it.

•

Country: select your country of residence.

EXIT

Return

ОК

Confirm

• OSD language: select the on-screen

menu language.

• Subtitle language: select the subtitle

language.

• Audio language: select the audio track

language if several languages are supported.

• Digital audio output: select the digital

output type (PCM/RAW).

9

9

Operation

Operation

System

System

Parental

Guidance
Set Password
Restore Factory Default
Information

EXIT ОК

Return Confirm

•

Parental Guidance: lock viewing of a

channel (first enter the original password
000000 or your own password).

•

Set password: set or change the

password for the locked channels (enter

the original password 000000 or your
own password). You will then be asked

to enter a new password. Note: if you
forget your password use the master
password 888888.

•

Restore Factory Default: reset all

settings to initial factory values. You will be
asked to enter the password.

•

Information: view model, hardware and

software information.

USB

USB

Multimedia

Photo Configure
Movie Configure

PVR Configure

EXIT ОК

Return Confirm

• Multimedia: if a USB storage containing

media files is connected to this unit, press
OK button to show the menu in which you
can select an icon to start playback of
corresponding supported type file (Music/
Photo/Movie/PVR).

•

Photo Configure: adjust slide time,

mode and aspect ratio.

•

Movie Configure: adjust subtitle size,

background and font color.

•

PVR Configure:

(see below).

setting

The screen menu of your unit can be
changed without prior notice and hence differ
from the menu represented in this Manual.

PVR and Timeshift

10

10