Tektronix THS700 Datasheet
Handheld Battery Operated Oscilloscope/
DMM/Power Analyzers
THS700 Series
Features & Benefits
THS730A/THS720A/
THS720P
200 and 100 MHz Bandwidth
1 GS/s and 500 MS/s Sampling
Rates per Channel
Two Channels and Dual Digitizers
External Trigger
3
⁄4 Digit DMM with Datalogger
3
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated
Oscilloscope and DMM Channels
for Safety
Full Floating Measurement
Capability up to 600 V
Advanced Trigger – Delay,
Pulse and Video (Line Count
THS730A.
THS700 Series
Handheld Battery Operated
Oscilloscopes
The TekScope
Oscilloscope/DMM combines a fullfeatured real-time oscilloscope with a
True RMS digital multimeter in rugged,
battery-operated instruments. Scope and
meter modes can operate simultaneously
and independently on the same or separate signals. The high-resolution, backlit
display and pop-up menus make it easy
for users to take full advantage of the
instrument’s many features. These include
cursors, video trigger, voltage and resistance
measurements, and storage of waveforms,
data and instrument setups. In addition,
they offer the most comprehensive
triggering capabilities – external trigger
®
THS700 Series
THS720P.
and extensive triggering including delay,
pulse width and video.
The THS700A Series is ideal for electronic
applications – at the bench or at the site.
The THS720P Oscilloscope/DMM includes
features to address the needs of electrical/
power electronics measurements.
and Field Select)
21 Automatic Measurements
RS-232 Programmability/
Communications
NiCd Battery and AC Adapter
Deluxe Soft Carrying Case
THS720P Only
Measures Harmonics up to
31st (Fundamental from 30 Hz
to 450 Hz)
Automatic Power Measurement
with Statistics
Advanced Trigger – Delay, Pulse,
Video (Line Count and Field
Select), PWM Motor Drive
1 kV High-voltage Probes
Applications
THS730A/THS720A/
THS720P
Field or Bench Electronic
Troubleshooting
Floating (Nongrounded) System
Measurements
Industrial Electronic Equipment
Troubleshooting (THS720P)
Power Quality Surveys
(THS720P)
RMS
Handheld Battery Operated Oscilloscope/DMM/Power Analyzers
THS700 Series
The Only Safe Measurement
Solution for Power Electronics
The THS720P TekScope IsolatedChannel
Oscilloscope/DMM is ideal for electrical/
power electronics applications.
The THS720P includes features specifically
for electrical/power electronics measurements which allow testing and verifying
correct operation of motors, checking
transformer efficiency, verifying powersupply performance and measuring the
effect of neutral current. These features
include harmonic analysis, power measurements and statistics and PWM motor
drive triggering. It also contains the
powerful features of a modern oscilloscope
that enable troubleshooting and verification
of complicated electronic control circuits
controlling the high-voltage powerelectronics circuitry.
The THS720P shares measurement
features with the THS730A, THS720A
Oscilloscope/DMMs, which are ideal for
electronic applications.
Characteristics
™
Oscilloscope Functions
THS730A THS720A THS720P
Bandwidth 200 MHz 100 MHz 100 MHz
Sample Rate (each channel) 1 GS/s 500 MS/s 500 MS/s
Time/Division Range 2 ns to 50 s/div 5 ns to 50s/div 5 ns to 50s/div
Power Measurements N N Y
Oscilloscope Functions
Channels – Two.
Sensitivity –
5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range – ±10 div.
DC Gain Accuracy – ±2%.
Vertical Resolution – 8-Bits.
Record Length – 2500 points.
Horizontal Accuracy – ±200 ppm.
Roll Mode – ≥ 0.5 s/div.
Autorange – User-selectable.
Trigger Modes – Auto, Normal.
Trigger Types – Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates –
Odd field, even field and line.
Motor Trigger (THS720P only) –
Triggers on 3- and 5-level pulse-width modulated
power signal.
Harmonics (THS720P only) –
Up to 31st (30 Hz to 450 Hz).
External Trigger Input – 5 MHz TTL compatible.
Waveform Processing –
Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage – 10 waveforms.
Acquisition Modes –
Sample, Envelope, Average, Peak Detect.
Cursor Measurements –
delta Volts, ∆ Time, 1/∆ Time (Hz),
Degree (phase).
Cursor Types –
Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System –
Interpolation: Sin(x)/x.
Format: YT and XY.
Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
Handheld Digital Oscilloscopes • www.tektronix.com/oscilloscopes
2
Loading...