Tektronix TDS510A Data Sheet

TDS 510A
Features
Specs
Ordering Information
Digitizing Oscilloscope
TDS 510A
This product is discontinued. Characteristics Vertical System
Bandwidth - 500 MHz.*
1
Channels - Four. Waveform Capture Rate - 150 waveforms/s. Max Sample Rate -
1 and 2 Channels: 500 MS/s. 4 Channels: 250 Ms/s.
Sensitivity - 1 mV to 10 V/div. Position Range - ±5 divisions. Offset -
1 to 99.5 mV/div: ±1 V. 100 to 995 mV/div: ±10 V. 1 to 10 V/div: ±100 V.
DC Gain Accuracy - ±1%. Vertical Resolution - 8-Bits. Analog Bandwidth Selections - 20 MHz, 100 MHz, and Full. Input Coupling - AC, DC, or GND. Input Impedance Selections -
1 megaohm in parallel with 10 pF, or 50 Ohm (AC and DC coupling).
Maximum Input Voltage - 300 V CAT II; ±400 V (peak). Derate at 20 dB/decade above 1 MHz. 1 megaohm or GND coupled.
Channel Isolation - >100:1 at 100 MHz;>30:1 at BW for any two channels with equal V/div settings.
AC Coupled LF Limit -
AC 1 megaohm coupled: </=10 Hz. AC 50 Ohm coupled: </=200 kHz.
*
1
500 MHz typical at probe tip with P6139A probe.
Time Base System
Time Bases - Main, Delayed. Time/Div Range - 500 ps to 10 s/div. Time Base Accuracy - ±25 ppm over any interval >/=1 ms. Record Length - 50 K points. Pre-Trigger Position - 0 to 100% of record.
Acquisition System
Acquisition Modes - Sample, Single Sequence, Average, Envelope, Hi-Res, Peak Detect.
Trigger System
Trigger Types - Edge (Main and Delayed), Pulse (Width, Glitch, and Runt), Logic (Pattern and State), Video - Opt. 05
(NTSC, PAL, HDTV, FlexFormat
TM
).
Main Trigger Modes - Auto, Normal, Single. Delay Trigger Modes - Delay by time, events, or events and
time.
Storage
Waveforms - Four full 50 K point records. Setups - 10 front-panel setups.
Display System
Monitor - 7 in., 640 x 480, monochrome. Waveform Style - Dots or vectors, infinite and variable
persistence. Display Formats - YT, XY Zoom, Fit to Screen.
Automatic Measurements
Period Frequency
High Low +Width -Width Maximum Rise Minimum Fall Peak to Peak Amplitude +Duty Cycle -Duty Cycle +Overshoot -Overshoot Propagation Delay Burst Width Mean Cycle Mean RMS Cycle RMS Area Cycle Area Phase
Advanced Waveform Functions - FFT, Differentiation, Integration (Option 2F), Limit Testing.
Cursor Measurements - Absolute, Delta; volts, time, frequency. NTSC IRE units and line number with video trigger (Option 05).
Waveform Functions - Interpolation (sin(x)/x or linear), Average, Envelope, Autosetup.
Outputs
VGA Out - Monochrome. RS-232 and Centronics - Opt. 13. Hardcopy Formats - Epson, Thinkjet, Deskjet, Laserjet,
PostScript, TIFF, PCX, BMP, DPU411/412, HPGL, Interleaf. Power - 90 to 250 V RMS, 45 to 440 Hz, 300 W maximum.
Physical Characteristics
Dimensions mm in.
Height 193 7.6 Width 445 17.5 Depth 432 17
Weight kg lbs.
Net 14.1 31
Safety Certification
UL and CSA-certified.
Top of Page
Features
Specs
Ordering Information
Tektronix Measurement products are manufactured in ISO registered facilities.
49A-10733-2p78, 06/1997, 09/01/1999
© Copyright Tektronix, Inc | webmaster@tek.com | Privacy Policy
Loading...