xx
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
ZZZ
Digital Storage Oscilloscope
Declassification and Security Instructions
www.tektronix.com
077-0445-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by
national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published
material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. B o x 5 0 0
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worl dwi de, v isit www.tektronix.com to find contacts in your area.
Table of Contents
Preface ........... ................................ .................................. ................................ ................................................. iii
Clear and Sanitize Procedures. . ..... . ..... ..... . ..... . ..... . .... . . .... . ..... . ..... . ..... ..... . ..... . ..... . .... . . .... . ..... . ..... . ........................... ...... 1
Memory Devices..................................... .................................. ................................ ........................................ 2
Data Export Devices......................... .................................. ................................ ................................................ 5
Troubleshooting................................. ................................ .................................. .................................................. 7
How to Clear or Sanitize a Nonfunctional Instrument............. ................................ .................................. ...................... 7
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series i
Table of Contents
ii TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Preface
If you have data security concerns, this document helps you to sanitize or remove memory devices from the listed products.
These products have data storage (memory) devices and data output devices (USB ports). These instructions tell you how
to clear or sanitize the memory devices, and also tell you how to declassify an instrument that is not functioning.
Instrument code and calibration settings reside in nonvolatile flash memory. Instrument setups and reference waveforms
mayalsobestoredinflash memory or on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at www.tektronix.com/support.
Reference
Products
The procedures in this document are written to meet the requirements specified in:
NISPOM, DoD 5220.22–M, Chapter 8
ISFO Process Manual for Certification & Accreditation of Classified Systems under NISPOM
The following Tektronix products are covered by this document:
TDS1000B Series.
TDS2000B Series.
TDS1000C-EDU Series.
TDS2000C Series.
TPS2000B Series.
TDS1001B, TDS1002B, TDS1012B
TDS2002B, TDS2004B, TDS2012B, TDS2014B, TDS2022B, TDS2024B
TDS1001C-EDU, TDS1002C-EDU, TDS1012C-EDU
TDS2001C, TDS2002C, TDS2004C, TDS2012C, TDS2014C, TDS2022C, TDS2024C
TPS2012B, TPS2014B, TPS2024B
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series iii
Loading...