TeeJet FENDT-INTERFACE User Manual

INSTRUCTIONS

FOR

FENDT-INTERFACE

The interface transforms the signals from the built-in sensors of the tractor into the type of signals
that LH AGRO’s monitors are built to function with.

If you want to be able to use the monitor and interface on two or several Fendt-tractors, just
mount the interface on the rear side of the monitor.

LH Technologies Denmark ApS

Mølhavevej 2
9440 Aabybro
Denmark
Tel. [phone]
Fax. [phone]

Internet: www.lh-agro.com

1

The interface can be mounted without using any tools. The box is mounted with velcro tape and
all connections are fitted with plugs.

PLUGS:

1: Power-connection. +12 Volt (blue wire) on center pin.

2: Signal-plug. Connect to the signal socket of the tractor.

PIN FUNCTION WIRE COLOR

1 Speed signal from gear box Black
2 Speed signal from radar Blue
3 0 Volt (Ground) Brown
4 Area counting on/off from lift Beige

2