Teac US-122 Installation

US-122

CD Installation

Below are the detailed and complete CD installation instructions for
the Tascam US-122 for Windows XP. These instructions are to be
followed if the user is unable to install with the instructions provided
with the US-122

BEFORE YOU BEGIN,

MAKE SURE THE US122 IS NOT PLUGGED IN

DO NOT PLUG IN YOUR US122 UNTIL YOU ARE INSTRUCTED TO.

TURN OFF YOUR ANTI VIRUS

(1A)

IF YOU HAVE PRECIOUSLY ATTEMPTED TO INSTALL THE US-122

PERFORM A CLEAN UNINSTALL BEFORE PROCEEDING.

The US122 Clean Uninstall document can be found on your CD with in the

Application notes or Documentation folder, English, CleanWin2k_Eng.

Please note that the instructions in that document direct you to the /WINNT folder

for Windows 2K. This folder is named /WINDOWS in XP.

Load the US122 CD-ROM into the CD drive.
Wait a few seconds and a window will appear.
Select Open folder to view files using Windows explorer.
Double-click on Drivers or Drivers Installers.
Double-click on “US122_Win2K_Install_3_06.exe”. note: the Version number

might change

It will have a computer and boxes for an icon.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The “Welcome” screen will appear.
Follow the Closing of Programs instruction if it is applicable to your situation.
Click on NEXT.
The “Read me Information” screen will appear.
Click on NEXT.

The "Start install" screen will appear.
Click on NEXT.
The "Reboot computer" screen will appear.
This screen will inform you that some components were not installed and it will
ask you to reboot your computer
Select "Yes, reboot my computer now".
Click on NEXT.

AFTER YOUR COMPUTER FULLY REBOOTS, PLUG IN YOUR US-122

DIRECTLY INTO YOUR COMPUTER USING THE CABLE THAT IS

PROVIDED. UNPLUG ANY USB DEVICE OR HUB THAT IS USING THE

SAME BUS EXCEPT FOR YOUR KEYBOARD AND MOUSE.

(2A)
Found New Hardware Screen should pop up.

The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?”,
select "Install from a list or a specific location (Advanced)”.
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.
If not, click on BROWSE to select it.
UNCHECK “Search removable media Floppy, CD-ROM” if checked.
Click NEXT.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The "Completing the Found New Hardware Wizard" screen will appear.
Click on FINISH.

"FOUND NEW HARDWARE" SCREEN SHOULD POP UP, AGAIN.

Found New Hardware Screen should pop up.

The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?”
Select "Install from a list or a specific location (Advanced)”.
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.