Supplemental to New Product Information (SNPI)
TN-4D
Analog Turntable
Employing a new ultra-stable, direct-drive motor,
a classically designed turntable with knife-edge tonearm bearings
Features at-a-glance
Direct-drive analog turntable
Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
Die-cast aluminium platter
Knife-edge, pivot-point tonearm bearings, designed by high-end tonearm manufacturer SAEC
Multi-layer Piano Black or natural Walnut veneer finish
Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
Digital recording capability on a PC via USB digital audio output
2-speed drive for 33-1/3 and 45 rpm
Gold-plated output connectors to resist oxidation
Acclaimed Oyster MM cartridge by SUMIKO
1
Last update: 2019/3/25
Supplemental to New Product Information (SNPI)
Product overview
The TN-4D is a direct-drive, analog turntable with an elegant, low-profile design, made possible by
the use of a newly-developed brushless DC servo motor.
Our new brushless DC motor (with feedback control system) achieves crystal-locked speed stability
and smoother rotation while also eliminating cogging*. This low-profile motor allowed us to design a
plinth that’s extraordinarily sleek and stylish compared to that of most other direct drive turntables.
The new tonearm employs knife-edge, pivot-point bearings, developed in collaboration with SAEC
Corporation, a world-famous, high-end tonearm manufacturer. The result is an insightful, highresolution sound quality that tonearms with conventional bearings can’t match. Partnering it is a
carefully designed PHONO EQ amplifier that allows you to directly connect the turntable to the linelevel inputs of your existing hi-fi system. A high quality NJM8080 op-amp, specially designed for hi-fi
applications by New Japan Radio Corporation, is employed to convey the finest of musical detail.
Additionally, a USB port on the back panel allows you to digitally archive your vinyl collection via your
PC/Mac.
To extract the music from your vinyl, the TN-4D comes with a highly-regarded Oyster MM cartridge
from SUMIKO – a legendary American cartridge manufacturer. Noted for its innate musicality, the
cartridge comes pre-installed on the headshell at the factory, allowing near ‘plug and play’ operation.
The S-shaped tonearm meanwhile allows for quick cartridge/headshell swaps, so users can alter the
sound quality by experimenting with different cartridges, if the desire takes them.
The TN-4D is an analog turntable that achieves highly accurate rotational speeds and is very
distinctive, for a direct-drive design, thanks to its sleek and stylish aesthetics.
What is Cogging?
Cogging is a phenomenon in which the periodic attraction of the armature and rotor inside the motor is
dependent on the rotation angle, resulting in a fine pulsing. For example, if you turn the axle of a motor with
your fingers, you'll feel the rotation occurring in steps. This phenomenon is known as cogging.
In order to eliminate cogging on a direct-drive turntable, a motor needs to have large numbers of poles, along
with complex circuits and a mechanism to achieve smooth rotation. As a result, most turntable direct-drive units
are relatively large, which is why the resulting turntables are so bulky.
New motor, developed exclusively for direct-drive turntables
The TN-4D uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a
computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive
turntable, especially one with such a stylish, low-profile design.
Die-cast aluminium platter
In conjunction with the newly-developed motor, the high inertia, diecast aluminium platter helps to achieve better speed stability.
2
Last update: 2019/3/25
Supplemental to New Product Information (SNPI)
Knife-edge, pivot-point tonearm bearings
In collaboration with SAEC Corporation, a world-famous, highend tonearm manufacturer, the TN-4D's tonearm employs a
knife-edge, pivot-point bearing. Unlike the case for tonearms
with conventional bearings, any fine vertical movements
encountered by this tonearm actually help in delivering a more
dynamic sound with excellent resolution. The S-shaped
tonearm also employs a universal headshell fitting, allowing
users to quickly and easily swap cartridges/headshells, and
supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)
Precision anti-skating and stylus-pressure adjustment
As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure
adjustment, and an anti-skating mechanism.
Built-in PHONO EQ amplifier supporting MM cartridges
The TN-4D comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable
to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio
Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the
cartridge up to LINE level strength without any loss of quality.
USB digital output
A USB port on the back panel delivers CD-quality digital audio to your PC/Mac, allowing you to
record/archive your vinyl in a high quality, digital audio format. Once you have archived your vinyl to
digital, it’s a simple matter to listen to them while out and about, via a smartphone/portable audio
player, or in your car (by burning them onto a CD-R or transferring them to a memory card/stick).
And to ensure pristine signal transfer, gold-plated PHONO/LINE output terminals are employed to
prevent analog audio signals from losing quality as a result of oxidation.
2-speed turntable for 33-1/3 and 45 rpm
The TN-4D supports 33-1/3 and 45 rpm for LP and EP records. Our insistence on quality engineering
can even be seen in the construction of the rotary control for start-up/speed selection, formed of
machined aluminium.
Insulating feet with excellent shock absorption
The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to
the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D is
very resistant to acoustic feedback.
Pre-installed Oyster cartridge by SUMIKO
The TN-4D comes with a well-regarded Oyster MM cartridge from
SUMIKO – a legendary American cartridge manufacturer. Regardless of
the type of music, the Oyster cartridge delivers a powerful but insightful
performance.
3
Last update: 2019/3/25
Supplemental to New Product Information (SNPI)
Key Features
Direct-drive analog turntable
Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
Die-cast aluminium platter
Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
Multi-layer piano black or natural walnut veneer finish
Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
Digital recording on PC/Mac via USB digital audio output
2-speed drive offering 33-1/3 and 45 rpm
Gold-plated oxidation-resistant output connectors
Oyster MM cartridge by SUMIKO
Shock-absorbing insulating feet
GND terminal
RoHS compliant
Specifications
Turntable section
Type Direct Drive
Motor Brush-less DC Motor
Rotation Speeds 33-1/3 rpm, 45 rpm
Wow-and-Flutters 0.1%
S/N Ratio 67dB or higher (A-weighted, 20kHz LPF)
Turntable (Platter) Aluminium, 30cm
Ton e arm section
Type S-shaped, Static-balanced
Effective Length 223mm
Needle Pressure Range 0g to 5.0g
Compatible Cartridge Weig ht 4.0g to 13.0g
14g to 23g (including Head-shell)
Headshell and Cartridge sections
Type MM-type (SUMIKO Oyster factory installed)
Output Voltage 4.0mV (1kHz)
Needle Pressure 1.5g to 2.5g (appropriate value: 2.3g)
Weight 5.3g
Headshell Weight 10g (including nuts, screws, and wires)
Compatible Stylus Styluses for SUMIKO Oyster
4
Last update: 2019/3/25
Supplemental to New Product Information (SNPI)
Analog Outputs
Connector RCA Pin jack x 1 pair (PHONO/LINE switchable)
Output Voltage
PHONO 4.0mV (1kHz)
LINE 224mV (-13dBV)
USB Output
Connector USB B (DC 5V 100mA USB Bus power required)
Audio Format PCM, 8k/11.025k/16k/22.05k/32k/44.1k/48kHz, 16-bit
General
Operating Power AC 100 to 240V, 50/60Hz
Power Consumption 2W
Standby Power 0.5W or less
Dimensions (W x H x D) 420 x 117 x 356 mm / 16.5” x 4.6” x 14.0” (incl. protrusions)
Weight Approx. 6.1kg / 13.5 lbs.
Included Accessories Felt Mat, EP Adapter, Counter Weight,
Headshell (SUMIKO Oyster installed), P la tt er, Dust C o v e r, Hinges x 2,
RCA Audio Cable with GND Terminal, AC Adapter (GPE036W-24015),
Owner’s Manual (incl. Warranty Card)
Rear Panel
5
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.