TEAC DVD Duplicator systems are high-precision electronic devices. Do not use them in
any manner other than as specified in this manual. Please read this manual in its entirety
before you begin the installation procedure. Use of controls, adjustments, or performance
of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent fire or shock, do not expose the unit to moisture or rain.
To prevent electrical shock, do not attempt to disassemble the DVD Duplicator system.
Refer servicing to authorized personnel.
TEAC DVD Duplicator drives utilize a laser beam that can be harmful to your eyes. Do not
disassemble the cabinet or unit. Do not attempt to look through the front panel or into the
unit while the power is turned on.
A user who changes or modifies the unit or operating procedures specified herein without
expressed written approval by the manufacturer will void user authority to operate the
equipment.
Specifications and features subject to change without notice or obligation.
TEAC America, Inc. reserves the right to modify product offerings or specifications
without advanced notice. No part of this publication may be reproduced in any format
without the expressed written permission of TEAC America, Inc.
TEAC is a trademark of TEAC Corporation. All other trademarks and registered
trademarks are the property of their respective owners.
Piracy Statement
Copying audio, video, or software without the permission of the copyright holder is illegal.
TEAC accepts no responsibility for copyright infringement or misuse of this equipment. It
is the sole responsibility of the user to ensure that the legal copyrights of the copyright
owners are respected.
About This Manual
This
TEAC Tower DVD Duplicator User’s Manual
Tower DVD Duplicator. It is divided into the following chapters:
Chapter 1: Introduction
This chapter describes the shipping package contents and introduces the TEAC Tower
DVD Duplicator.
Chapter 2: Using the DVD Duplicator
This chapter explains how to set up the DVD Duplicator. It also details its basic copy
operation.
Chapter 3: DVD Duplicator Functions
This chapter explains all available functions of the DVD Duplicator.
Appendix A: List of Functions
Appendix A includes a complete list of all DVD Duplicator functions.
Appendix B: LCD Messages
Appendix B lists all messages that may appear on the LCD display.
Appendix C: About DVD-R and DVD-RW Discs
Appendix C contains information about handling, loading, and ejecting discs.
Appendix D: Specifications
Appendix D includes technical specifications for the TEAC Tower DVD Duplicator units.
Appendix E: Technical Support and Warranty
This appendix explains how to contact technical support at TEAC America, Inc. and
provides Limited Warranty information.
Thank you for purchasing a TEAC Tower DVD Duplicator.
Note:
❑
TEAC Tower DVD Duplicators are available in 1x3 (one source drive and
three target drives) and 1x7 (one source drive and seven target drives) models, with or without internal hard disk drives. Please refer to “Specifications” on page 29 for detailed information on the model you purchased.
❑
This User's Manual is intended for both 1x3 and 1x7 Tower DVD Duplicator systems. Operational instructions for all models are essentially the
same. The primary difference between models is the number of target drives
and the inclusion of an optional hard disk drive. Other minor differences
between the models are described herein as necessary.
The TEAC Tower DVD Duplicator is a stand-alone disc-to-disc DVD Duplicator
system that does not require connection to a computer. It can duplicate a single
master DVD to DVD media at up to 16X speeds, resulting in an exact replica of a
4.7GB disc. It can also duplicate discs to CD-R media at up to 48X speeds.
The TEAC Tower DVD Duplicator is designed to perform DVD copying quickly
and accurately. The DVD Duplicator automatically identifies source DVD
formats and replicates the content as required.
The TEAC Tower DVD Duplicator performs continuous copying with no waiting.
It is an ideal DVD Duplicator for the advanced user who requires speed and
accuracy.
You can set up your TEAC Tower DVD Duplicator very quickly and easily. There
is no need to install any software. There is no need to attach any cables to your
computer. The TEAC Tower DVD Duplicator functions entirely as a stand-alone
unit.
Caution:
220VAC voltage. Before you turn on the power to the unit, be certain to select
the correct voltage for your region by setting the AC Voltage Selector on the rear
panel. Failure to do so can result in damage to the unit. For more information,
refer page 5.
TEAC Tower DVD Duplicator User’s Manual1
Your TEAC Tower DVD Duplicator can operate on either 115VAC or
DVD Duplicator Package Contents
DVD Duplicator Package Contents
Your TEAC DVD Duplicator package includes the following items (see
Figure 1).
❑
TEAC (1x3 or 1x7) Tower DVD Duplicator unit
❑
AC power cable
❑
TEAC Tower DVD Duplicator User’s Manual
(this booklet)
User’s Manual
1x3 DVD DuplicatorAC power cable
Figure 1. DVD Duplicator Unit Package Contents
Note:
If any of the items above is missing from your package upon purchase,
OR
1x7 DVD Duplicator
please contact your vendor immediately.
2TEAC Tower DVD Duplicator User’s Manual
Front Panel
Figure 2 illustrates the front panel of the Tower DVD Duplicator unit.
source drive
target drive
LCD control panel
target drive
power switch
LED status indicators
Front Panel
Figure 2. Front Panel of the DVD Duplicator Unit
source drive:
Insert the disc to be copied into the source drive. Use the disc
tray to load a DVD into the drive. You can open the tray by pressing the eject
button (if the tray fails to open, you can use the emergency eject mechanism).
You can close the tray by pressing the eject button.
Notes:
❑
TEAC strongly recommends that you do not push the tray in to close it.
Please press the eject button to eject or retract the tray.
❑
The Tower DVD Duplicator may include an internal hard disk drive as
an alternate source drive. Please refer to “Specifications” on page 29
for detailed information on the model that you purchased.
TEAC Tower DVD Duplicator User’s Manual3
Front Panel
LCD control panel:
Use the control panel buttons to navigate through the
various functions viewed on the LCD display.
Figure 3. LCD Control Panel
The DVD Duplicator control panel features an LCD display and four buttons.
These buttons are described in the following table:
Press the Up arrow button to scroll up functions or menus.
Press the Down arrow button to scroll down functions or menus.
Press the ENT (Enter) button to execute a selected function.
Press the ESC (Escape) button to cancel a selected function or to return to
the main menu.
target drives:
Insert a blank disc into each target drive to make a copy of the
source disc. You can open the tray by pressing the eject button (if the tray fails
to open, you can use the emergency eject mechanism). You can close the tray
by pressing the eject button.
Note:
TEAC strongly recommends that you do not push the tray in to close
it. Please press the eject button to eject or retract the tray.
power switch:
Use the power switch to turn the power to the DVD Duplicator
unit on and off.
LED power indicator:
when the DVD Duplicator power is on
4TEAC Tower DVD Duplicator User’s Manual
The LED power indicator will be continuously lit
.
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.