TEAC |
E-1 |
|
H E A D D E M A G N E T I Z E R |
To maintain optimum recording characteristics of tape recorders, residual magnetism of recording heads must be removed from time to time. Residual head magnetism destroys valuable recordings by
adding noise and distortion. |
|
||||
The |
E-1 head demagnetizer is designed to provide complete elimina- |
||||
tion of head magnetism. |
A unique built-in alarm buzzer informs the |
||||
user that the unit is operating. |
|
||||
FEATURES |
|
|
|
||
• |
P o w e r f u l D e m a g n e t i z a t i o n |
Only four to five |
strokes along the front of the head surface for complete erasure. |
||
• |
O p e r a t i o n a l a l a r m d e v i c e |
A buzzer |
sounds |
during operation. (Utility Model) |
|
• |
L o w |
t e m p e r a t u r e r i s e The E-1 can be operated continuously while application is made to several tape recorders. |
|||
• P o l e |
t i p s A pair of pole tips covering the elements provides better demagnetizing efficiency. Protection of head and ease of |
||||
|
|
handling. |
|
|
|
SPECIFICATIONS
Voltage: 100 to 117V or 220 to 240VAC (50/60 Hz)
Power Consumption: Approximately 6W
OPERATION
1.Turn off the tape recorder power switch.
2.Insert the power cord plug to a power receptacle and depress the push-button switch on the side of the demagnetizer. This initiates demagnetizing operation and the alarm sounds.
3. Slowly move |
the magnetic arms toward the core of the head. Pass the arms over the head gap four or five times and gradually |
move the arms away from the head. |
|
* Repeat the |
same operation for all magnetic heads on the equipment. |
*Note that demagnetizing arms should not be suddenly moved away from the head, or AC power should not be shut-off during demagnetizing.
*Pole tips prevent head damage.
4. This demagnetizer can be used not |
only for magnetic heads but for other magnetized-objects (such as capstan and |
tape |
guide). |
As a safety precaution, screwdrivers, |
scissors, and other tools that may come into contact with the recording tape or |
head |
should |
also be demagnetized. |
|
|
|
T E AC CORPORATION
HEAD OFFICE/SALES OFFICE
3-7-3, NAKA-CHO, MUSASHINO, TOKYO PHONE: MUSASHINO (0422) 53-1111
PRINTED IN JAPAN - 1275K3 • D-915V