Taylor 150 Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

150

Item No.

_______________________________

150

Offer all the popular soft serve variations from low or non-fat
ice creams to custards, yogurt and sorbet.

Freezing Cylinder

One, 1.5 quart (1.4 liter).

Mix Hopper

One, 8 quart (7.6 liter). Separate hopper refrigeration (SHR)
maintains mix below 41ºF (5ºC) in Auto and Standby modes.

Indicator Lights

The Mix Low light alerts the operator to add mix.

Solid State Controls

Taylor Quality Control (TQC) precisely monitors viscosity to maintain
consistent quality.

Standby

During long no-use periods, the standby feature maintains safe
product temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment
in place. The lock can be released to move the equipment for
cleaning.

Features

Soft Serve Freezer

Single Flavor, Taylormate®

150

150Soft Serve Freezer

Electrical

One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements. Manufactured to be cord connected.
Consult the international Taylor distributor for cord & receptacle specifications
for 50 Hz. equipment.

Beater Motor

One, 0.5 HP

Refrigeration System

One, 3,000 BTU/hr. R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 6” (152 mm) on both sides. Install the skirt provided on the right
side of the unit and place the back of the unit against a wall to prevent
recirculation of warm air. Minimum air clearances must be met to assure
adequate air flow for optimum performance.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Electrical Total Supplied

Amps with NEMA Cord

115/60/1 Air 16.0 5-20P
208-230/60/1 Air 10.2 6-15P
220-240/50/1 Air 7.8 ----

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)

Weights lbs. kgs.

Net 250 113.4
Crated 337 152.9

cu. ft. cu. m.

Volume 23.0 0.65

Dimensions in. mm.

Width 14-1/16 357
Depth 24 610
Height 51-1/2 1308
Floor Clearance 3-11/16 94

*Mounted on standard casters

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

 Cone Dispenser

Options

Specifications

026194-ADV

10/10

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

24

(610)

12-1/2

(318)

6-7/16

(164)

MIX HOPPER

DRIP PAN

11-7/16

(291)

7-1/4
(184)

(51)

7/8 DIA.(22) HOLE

FOR ELECTRICAL

CONNECTIONS

7-5/8
(194)

2-3/16

(56)

(AIR COOLED)

OPERATOR END

TOP VIEW OF BASE PAN

14-1/16

(357)

24

2

(610)

* AIR OUT

51-1/2
(1308)

18-3/8

(467)

6-1/16

(154)

LEFT SIDE VIEW

43

(1092)

CENTERLINE

OF BARREL

44-3/4
(1137)

* AIR IN

22-13/16

(579)

1

(25)

3-11/16

(94)

NOTE:

* ( AIR COOLED ONLY )

FIGURES IN PARENTHESES INDICATE MILLIMETERS