Tascam CD-RW901MKII Specifications

CD-RW901MKⅡ

May, 2014

Product Spec Sheet

CD Recorder / Player

CD-RW901MKⅡ

■Specifications

Supported disc types CD, CD-R, CD-R-DA, CD-RW and CD-RW-DA

(High speed CD-RW is supported)

Playback disc formats CD-DA, CD-ROM ISO9660 LEVEL1/2Joliet format, multisession discs and

CD text

Playback file formats CD-DA: 44.1kHz, 16-bit stereo

MP3: 44.1kHz, 64-320kbps, VBR
Recording file formats CD-DA: 44.1kHz, 16-bit stereo
Frequency response 20 Hz - 20 KHz

±0.8 dB (playback)

±1.0 dB (recording)
S/N 95 dB (playback), 90 dB (recording)
Dynamic range 95 dB (playback), 90 dB (recording)
Distortion 0.006 % (playback), 0.008 % (recording)
Channel separation 90 dB (playback), 80 dB (recording)
Wow and flutter < 0.001 % (unmeasurable)
Analog inputs Balanced XLR-3-31
Level +4 dBu (Full Scale -16 dB)
Minimum input level -5 dBu (adjustable level at Full Scale -16 dB)
Input impedance 14 KΩ ±5 % (balanced)
Unbalanced RCA pin
Level -10 dBV ±2 dB (Full Scale -16 dB)
Minimum input level -19 dBV (adjustable level at Full Scale -16 dB)
Input impedance 22 KΩ ±10% (unbalanced)
Analog outputs Balanced XLR-3-32
Level +4 dBu (Full Scale -16 dB)
Maximum output level +20 dBu ±2 dB
Output impedance 75Ω ±5 % (balanced)
Unbalanced RCA pin
Level -10 dBV ±2 dB (Full Scale -16 dB)
Maximum output level +6 dBV ±2 dB
Output impedance 200Ω ±10% (unbalanced)

0003a -1- TEAC CORPORATION

CD-RW901MKⅡ

Phones output Stereo (6.3 φ), 20 mW, 32Ω
Digital input Coaxial RCA pin jack (IEC-60958 Consumer use)
Optical TOSLINK (IEC-60958 Consumer use)
AES/EBU XLR-3-31 (IEC-60958 Professional use)
Supported input sampling frequencies: 32-48 kHz
Digital output Coaxial RCA pin jack (IEC-60958 Consumer use)
Optical TOSLINK (IEC-60958 Consumer use)
AES/EBU XLR-3-32 (IEC-60958 Professional use)
CONTROL I/O PARALLEL D-SUB 15 pin
RS-232C D-SUB 9 Pin
REMOTE IN jack (for RC-RW901 only)
Keyboard Mini DIN 6 pin
Power U.S.A./Canada 120 VAC, 60Hz
U.K./Europe 230 VAC, 50Hz
Australia 240 VAC, 50Hz
Power consumption 17 W (U.S.A./Canada)
19 W (U.K./Europe/Australia)
Dimensions (d x w x h) 309 x 482.6 x 94 (mm)/ 12.2 x 19.0 x 3.7 (in)
Weight 4.5 kg (9.9 lb)

■Control connections

The pinouts of the CONTROL I/O (parallel) terminal on the
rear panel (see “Rear panel” on page 1) are:

Pin Function I/O Pin Function I/O

1 STOP Tally OUT 9 PLAY Tally OUT
2 REC Tally OUT 10 PAUSE Tally OUT
3 SKIP（Forward） IN 11 FADER. START ／ STOP ­4 SKIP（Back） IN 12 STOP IN
5 EOM Tally OUT 13 PLAY IN
6 REC IN 14 PAUSE IN
7 CAL IN 15 +5V* ­8 GND -

*: The maximum current supplied from this terminal is 50 mA.

Tall signals are open collector, with a maximum current of 50 mA. Input signals are active when low
(ground) for >
A fader start/stop control should be wired according to the following schematic:

30ms.

0003a -2- TEAC CORPORATION