Page 1
New Product Information
CC-222MKII
CD Recorder/Cassette Deck
September, 2004
Introduction
The CC-222MKII is the world's first CD recorder and cassette recorder combo deck,
bringing the two most popular consumer media formats in one very affordable package.
The two decks can be used independently, perhaps for playback of material on one deck
while the other deck is recording. Or, you can use both decks for continuous play
between the two decks.
The cassette deck provides Dolby B Noise Reduction for better sounding recordings. A
±12% pitch control allows for varied speeds during recording or playback. This is ideal
for performers, allowing them to adjust pitch and tempo to suit their needs.
Each deck offers analogue inputs and outputs on unbalanced RCAs, allowing truly
independent operation. Digital I/O for the CD recorder i s provided on SPDIF co ax and
optical ports. As a bonus, the CC-222MKII is equipped with a RIAA phono input which
allows direct connection of a turntable for creating CD or cassette masters of your
favorite LPs. For ease of operation a wireless remote control is included.
Included in the design of the CC-222mkII are a number of enhancements to make it even
more helpful for even t recording. A digital attenuation control can now be added to the
analog inputs, and the CD's digital converters have been upgraded to 24-bit resolution for
better dynamic range performance.
Page 2
Main Features
CD-RW Recorder
z Applicable discs: CD-R, CD-RW, CD-R-DA, CD-RW-DA
z Digital input volume control
z Sampling rate converter (32kHz / 44.1kHz / 48kHz)
z RCA pin jack, unbalanced analog input/outp ut
z COAXIAL and OPTICAL digital input/outpu t
z Fade in and out (1 to 24 seconds, 1 second steps)
z Auto track increment (via SPDIF or Audio level)
z Sound level for auto track and sync recording to be a d justable
Sound level: -72, -66, -60, -54, -4 8, -4 2, -36, -30, -24dB
z Sync rec
z Manual Track Increment
z REC MUTE
z Erase for CD-RW discs
z Un-finalize of CD-RW discs
z Single play, continuous play, random play, and program play (maximum 25 songs)
z Single, all, and A-B repeat
z Intro check
z Timer play (Power-on-play)
Cassette deck
z Auto reverse
z Dolby B noise reduction
z Approx. +/-12% pitch contr o l
z RTZ (Return to Zero)
z Rec Mute
z CPS
General
z Cassette to CD-R/RW dubbing and vic e versa
z Phono input for recording onto CD-R/ RW discs or cassette tape
z Continuous playback
z Wireless remote controller RC-222 supplied as standard
z 3U rack mountable
Page 3
Specifications
CD-R/RW Recorder
Applicable discs: CD, CD-R, CD-RW, CD-R-DA, CD-RW-DA
Quantization: 16-bit
Sampling frequency: 44.1KHz
Line Input: RCA
Nominal Input Level: -10dBV
Input Impedance: 50k ohm
Line Output: RCA
Nominal Output Level: -10dBV
Output Impedance: 1k ohm
Digital Input: Coaxial
Format: IEC60958 Type II (S/PDIF)
Digital Input: TOS LINK
Format: IEC60958 Type II (S/PDIF)
Digital Output: Coaxial
Format: IEC60958 Type II (S/PDIF)
Digital Output: TOS LINK
Format: IEC60958 Type II (S/PDIF)
Frequency response: 20Hz to 20kHz, +/-1.0dB (playback)
20Hz to 20kHz, +1.0dB, -1.5dB (recording)
Signal to noise ratio: 92dB (playback)
88dB (recording)
Dynamic range: 92dB (playback)
88dB (recording)
T.H.D: < 0.008% (playback)
< 0.01% (recording)
Channel separation: 80 dB (@1kHz, playback)
75 dB (@1kHz, recording)
Cassette Deck
Tape: Compact cassette tape C-60/90
(Normal and High Position, Metal: playback only)
Track Format: 4-track, 2-channel
Head Configuration: 4-track, 2-channel ;
Record/repro combination rotary head x 1
Erase head x 1
Motor: DC servo motor x 1
Tape Speed: 4.76 cm/sec
Pitch Control: approx. +/- 12 %
Page 4
Line Input: RCA
Nominal Input Level: -11dBV (0.28V)
Input Impedance: 50k ohm
Line Output: RCA
Nominal Output Level: -6.7dBV (0.46V)
Output Load Impedance: 50k ohm
Frequency Response: 50 Hz to 12.5 kHz +/-3dB (High Position)
50 Hz to 10 kHz +/-3dB (Normal)
Signal-to-Noise Ratio: 46 dB (with Dolby off)
52 dB (with Dolby-B on)
Fast Winding Time : 120 sec. (approx.) with C-60 cassette
General
Headphone: 1/4” stereo phone jack
10 mW x 2 (32ohm)
RIAA PHONO Input: RCA
Input sense: 5.6 mV
Input Impedance: 47k ohm
Signal to noise ratio: 60 dB
Power Requirement: 120 V 60Hz / 230 V 50 Hz
Consumpt i o n : 28 Watts
Dimensions (W x H x D): 483 mm x 138 mm x 295 mm
Weight: 7.4 kg ( lbs)
Rear Panel
Page 5
Remote controller RC-222
Loading...