Tascam BD-MP1 Specifications

Page 1
BD-MP1
0112a -1-
Dec, 2019
Product Spec Sheet
BLU-RAY DISC PLAYER
BD-MP1
Specifications General
Supported media
Disc media
Blu-ray: BD25, BD50, BD-ROM, BD-R, BD-RE DVD: DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW CD: CD-DA, CD-R, CD-RW
Disc formats
Blu-ray: BDMV, BDAV, BD-Audio DVD: DVD-Video, DVD-VR, AVCHD, DVD-Audio
Supported file formats
Video: ASF, MPG, AVI, 3GP, DAT, MKV, MOV, M2TS, OGM, TP, TS, MP4, WMV Audio: WAV, MP3, WMA, AAC, FLAC, APE Picture: JPEG, GIF, PNG *USB flash drive and SD card formats must use FAT16, FAT32 or NTFS file systems.
Audio
BD/DVD/USB/SD
Sampling frequency: 44.1/48/64/88.2/96/176.4/192 kHz Bit length: 16/24-bit
CD
Sampling frequency: 44.1/48 kHz Bit length: 16/24-bit
MP3/WMA
Sampling frequency: 32/44.1/48 kHz Bit rate MP3: 112 kbps - 320 kbps
WMA: 48 kbps - 192 kbps
Outputs
HDMI output
Connector: HDMI 19-pin Type A Resolution: 480i/576i, 480p/576p, 720p, 1080i, 1080p Aspect ratio: 16:9 Full, 16:9 Normal, 4:3 Pan & Scan, 4:3 Letterbox Video format: NTSC, PAL, Multi
Page 2
BD-MP1
0112a -2-
HDMI signal system: RGB PC level, RGB Video level, YCbCr (4:4:4), YCbCr (4:2:2)
Digital Audio output
COAXIAL
Connector: RCA pin jack Format: IEC60958-3 (S/PDIF) Output impedance: 75 Ω
Analog audio outputs
Balanced
Connectors: XLR-3-32 (1: GND, 2: HOT, 3: COLD) x2 (Stereo) Nominal output level: +4 dBV (1.23 Vrms) Maximum output level: +20 dBV (7.75 Vrms) Output impedance: 200 Ω
Unbalanced
Connectors: RCA pin jack × 1 pair Nominal output level: -10 dBV (0.316 Vrms) Maximum output level: +6 dBV (2.0 Vrms) Output impedance: 200 Ω
7.1ch Audio outputs Connectors: RCA pin jack x8 (FL/FR/SL/SR/SBL/SBR/C/SW) Connector Color: FL, SL, SBL-White FR, SR, SBR-Red C, SW-Black Nominal output level: -10 dBV (0.316 Vrms) Maximum output level: +6 dBV (2.0 Vrms) Output impedance: 200 Ω
Control input/output
RS-232C connector
Connector: D-sub 9-pin Format: RS-232C
Ethernet connector
Connector: RJ-45 Protocol: 10 BASE-T/100 BASE-TX
USB port
Connectors: USB type-A x2 (Front x1, Rear x1) Protocol: USB 2.0 compliant Rated supply voltage: DC 5 V, 1 A Mass storage class: 2 TB (MAX) Supported file formats: FAT16/FAT32/NTFS
SD slot
Supported media: SD (512 MB - 2 GB), SDHC (4 GB - 32 GB) Storage class: Max 32 GB Supported file formats: FAT16/FAT32/NTFS
Audio performance
Frequency response: 20 Hz - 20 kHz +/-0.5 dB (Fs = 44.1/48 kHz, JEITA) S/N ratio: > 96 dB (When playback, JEITA) THD (Total Harmonic Distortion): < 0.03% 1 kHz (JEITA) Dynamic range: > 96 dB (JEITA) Channel separation: > 89 dB (JEITA)
Page 3
BD-MP1
0112a -3-
Other
Power
AC100 - 240 V, 50/60 Hz
Power consumption
30 W
Dimensions
482.8 × 44 × 280.7 mm (W x H x D, including protrusions)
Weight
2.64 kg
Operating temperature range
5C – 35C (41F - 95F)
Dimensional drawings
____________________________________________________________________________________________________________________________________________________
TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other countries. Other company names, product names and logos are the trademarks or registered trademarks of their owners. Specifications and appearance are subject to change without notice. All information included in this document is as of Dec, 2019.
Loading...