TaoTronics QCY-J02 User Manual

Bluetooth V4.0

3.7v --- 80mA

Made in China

Bluetooth V4.0

3.7v --- 80mA

Made in China

75-07314-080 说明书

材质：双铜 80g

尺寸：38mmX93mm

Exclusively Distributed by

BLUETOOTH HEADSET

USER MANUAL

Model number:J02

折叠方式：拉折页

Thank you

We appreciate your choice of QCY
“Jack” J02 Bluetooth headset
exclusively distributed by
TaoTronics. Please read this
manual carefully. Make sure you
understand all information before
using this headset. If you need any
assistance, please feel free to
contact us.

Feature

• Cutting-edge Bluetooth 4.0

technology

• Easy set up in minutes with most

Bluetooth devices

• Up to 5 hours of talk time or 140

hours of standby with a single
charge

• Excellent sound quality with latest

CVC 6.0 Echo/Noise cancellation
technology for better clarity

• Works with music players, smart

phones, tablets, etc.

• Easy to use with convenient

controls

• Music control options with A2DP

profile

• Voice notification

• Headset battery meter display on

iPhone/iPad

• Multipoint support connection with

2 devices at the same time

• Comfortably fit either ear

Package Content

1 x J02 Bluetooth Headset

1 x USB charging cable

1 x micro-USB headphone extension

2 x ear hook

3 x earbud tip

Buttons and connections

2

①

②

Charging port

③

Volume +

④

Volume -

3

4

5

6

⑤

Mic

⑥

LED indicator

⑦

Power on

⑧

Power off

1

Multi-function button

Charging

The J02 Bluetooth headset is
partially charged at the factory.
Please make sure that you fully

7

charge it before using it for the first

8

time. To charge the unit:

1. Plug the micro-USB end of the
charging cable into the headset.

2. Plug the USB end of the
charging cable to any USB
charger or USB port from your
computer.

3. Red LED indicator will be ON
when charging is in progress.

4. When charging is finished, the
LED indicator will turn blue.

Normally it takes 2 hours to fully
charge the battery from empty.
We recommend charge the
headset at least once every month

We recommend charge the
headset at least once every month
even when the battery is not fully
empty.

Note: You cannot use the headset
while it is charging

Assemble the headset

The J02 headset comes with 2 ear
hook and 3 earbud tips. These
accessories are interchangeable to
best fit your wearing style.

Wearing the headset

1. Place the headset into your ear,
pointing straight down.

2. Then twist the headset upwards
so it points directly at your
mouth.

3. You should feel the headset
fitting securely in your ear.

Pairing

In order to pair the Bluetooth
headset with your smartphone or
any other device, you will need to
bring it to pairing mode first. Please
follow the following steps:

1. Turn on the headset by sliding
the power button.

2. Press and hold the multifunction
button for 5 seconds or until you
see the LED indicator flashing in

red and blue

3. Once the LED indicator is
flashing in red and blue, the
headset is now in pairing mode.

If you are using a smartphone or
tablet, you should now be able to

- 5 - - 6 - - 7 - - 8 - - 9 - - 10 -- 1 - - 2 - - 3 - - 4 -

alternatively.

discover the Bluetooth headset
(J02) listed as available device for
connection. Please follow the
instruction of your smart phone or
tablet to connect to the Bluetooth
headset. If your device is asking for
a password, please enter “0000”.

If you are using a Bluetooth
transmitter or other device without
screen, please follow the
instructions of your device to bring
it to pairing mode. Once the two
devices are in pairing mode, they
should connect automatically.

Please make sure to bring both
devices next to each other or
within 3 feet when pairing.

Note: Please make sure to keep
the device away from other
Bluetooth or radio transmitting
device during pairing stage, as
interference may cause pairing
failure.

Pairing to two smartphones

The Bluetooth headset is capable
of simultaneously connect to two
smartphones. To do this:

• Follow the instructions in the

“Pairing” section to connect the
Bluetooth headset to smartphone

1.

• Once connection is successfully

established, disable the Bluetooth
function on smartphone 1, and
turn off the Bluetooth headset.

• Follow the instructions in the

“Pairing” section to connect the
Bluetooth headset to smartphone

2.

• Once connection between

smartphone 2 and the Bluetooth
headset is established, go back
to smartphone 1, and turn on the
Bluetooth function on smartphone

1.

• The Bluetooth headset (J02)

should appear in the connection
list, simply tab it to connect if it
doesn’ t connect automatically.

You have now maintained an active
connection with 2 smartphones at

the same time.

You can now make / answer phone
calls from both smartphones.

Note: You can also pair two
Bluetooth devices with the headset
at the same time.

Connection priority

When connected to two
smartphones simultaneously, the
last phone used for call /answer
calls will have higher priority.
For example, an incoming call is
answered with smartphone 1.
During the call, a second call is
coming to smartphone 2. Press the
multi-function button once will
answer call 2 with smartphone 2.
But call 1 on smartphone 1 is still
on.
When call 2 is ended (by operation
from smartphone 2), the headset
will return to call 1 on smartphone

1.

Reconnecting

Once you have successfully paired
the headset with a Bluetooth
device, you no longer need to bring

both into pairing mode for them to
pair again. Simply turn on both
device, and they should
automatically connect with each
other.
For some smartphones, you may
have to select the Bluetooth
headset from the list of available
devices, and tab to connect.

Pairing with PC

Before connecting to your PC,
please make sure that:

• Your PC has Bluetooth function, or

have Bluetooth dongle installed
and working.

• Download and install the latest

Bluetooth driver for your
operation system.

To connect the Bluetooth
headset with your PC:

• Turn on the Bluetooth headset by

sliding the power button (Blue
light flash 3 times when turned
on).

• Press and hold the function button

until you see the LED indicator
flashing in red and blue.

North America

Website: www.taotronics.com

E-Mail: [e-mail]

Tel: [phone] # 4

(Monday-Friday: 9:00 – 18:00 PST)

Address: 2880 Zanker Rd, Suite 203, San
Jose, CA 95134

Asia Pacific

Website: www.taotronics.com

E-Mail:[e-mail](Japan)

Europe Union

Website: www.taotronics.com

E-Mail:

[e-mail] (United Kingdom)

[e-mail] (Germany)

[e-mail] (France)

[e-mail] (Spain)

[e-mail] (Italy)

EU Importer: ZBT International Trading
GmbH Lederstr 21a, 22525 Hamburg,
Deutschland

• Go to Setting -> Bluetooth Setting

-> Search Bluetooth Device.

• The Bluetooth headset should

appear as an available device
under the name “J02”.

• Click on connect and enter PIN

“0000” if required.

Reset to factory default
setting

Connect the headset to a charging
source and make sure it is charging
(see section “Charging” for more
details). When the device is in
charging mode, press and hold the
multi-function button until you see
the red LED indicator flash 3 times.
This will reset the headset to
factory default setting.

Understanding the LED
indicator

Status /
Action

Turn ON

Turn OFF
Headset has

been turned
ON

LED indicator

Blue light flash 3 times

Red light is on for 2 seconds
Blue light flash once every

7 seconds

In pairing
mode /
Searching

Paired and
working

Charging Red light is on constantly

Fully
charged

Battery low Red light flash once every 20

Blue and red light flashing
alternatively

Blue light flash once
every 7 seconds

Blue light is on constantly

seconds with a warning tone

Basic phone call actions

Action

Answer a call Press the multi-function

End a call

Adjust the
volume
Mute /
resume a call
Redial last
number
Reject an
incoming call

Call waiting

Call switching

Power ON

Power OFF Slide the power button to

Headset Control

button once
Press the multi-function
button once
Press the volume + or –
button
During a call, double press
the multi-function button
Double press the
multi-function button
Press and hold the
multi-function button for 3
seconds
Press the multi-function
button to answer the second
call and put the first call on
hold
Press the multi-function
button twice
Slide the power button to ON
position

OFF position

Voice Notification

When performing some specific
actions, the headset will give voice
notification as following:

Action

Incoming call Announcing incoming call

Power off

Pairing

Successfully
paired
Bluetooth
disconnected

Outside
Bluetooth
range

Battery level
low
Mute call Mute on

Resume call Mute off

Voice notification

number
HelloPower on

Goodbye

Pairing

Connected

Disconnected

Out of range

Battery low

Streaming music

Once you have established
Bluetooth connection with smart
phone or other stereo music
device, use the music player
feature to listen to stereo music.
Adjust the volume with the volume

button on the side. Press the
function button once to pause, and
press it again to resume.Press and
hold the volume button to change
to previous track or next track.

Note: for your own health, please

do not listen to music on

max volume for extended

period of time. We

recommend take 1 short

break every 30 minutes to

protect your hearing ability.

Specifications

Bluetooth
Version

Bluetooth
Profile

Range

Charging
time

Talking time Up to 5 hours

Standby time Up to 140 hours

Size

Weight

Working Temp

4.0

A2DP, HFP (1.6), HSP (1.2)

2.4 GHzFrequency

Up to 33 feet / 10 meters
(in open space)
2 hours

2.20 x 0.75 x 0.35 inch

0.02 lbs

32°F – 104°F(0°C to 40°C)

Input power 5 V (via Micro-USB port)

Battery type Rechargeable

Compatible
device

Patent
number
Model
Number

Li-Polymer (80 mAh)
Smartphone, iPad, tablets,

laptops, PC (with Bluetooth
connectivity), Bluetooth
music player, Bluetooth
transmitter

201230166945.2

J02

Warranty

1 year parts and labor warranty. If
the headset becomes defective
due to manufacture fault, we will
fix it or replace it free of charge.
However, customer is liable for
the shipping cost past 3 months
from original purchase date. We
do not cover damage caused by
the following:

• any abusive use and destruction

• normal ware and aging

• over exposure to chemical,

heat, moisture, fire, and
radioactive substance

• natural disaster

This warranty does not apply to
any second hand purchased
headset.

- 15 - - 16 - - 17 - - 18 - - 19 - - 20 -- 11 - - 12 - - 13 - - 14 -

FAQ / Trouble shooting

Q: The connection is not stable

and cuts out intermittently.

A: While the range of Bluetooth is

33 feet (10 meters), the
optimal range for Bluetooth
stereo transmission is 5 – 10
feet (or 3 meters). Bluetooth
signal is prone to loss caused
by impenetrable objects like
walls and ceilings. Additionally,
other radio transmitting device
in the area can also interfere
with Bluetooth transmission.
Please make sure there are no
objects between the headset
and your Bluetooth device, as
well as check out any other
radio transmitting device
within range.

Q: I have turned the Bluetooth

headset on, but it is not
connecting to my smartphone /
music player.

A: In order for both devices to

connect, you will need to bring
both to pairing mode. Simply

turn on any device is not going
to make them connect. Please
follow the instruction in the
“pairing” section.

Q: I have established connection

with my smartphone / music
player, but I am not hearing
any sound.

A: Please make sure that you

turn up the volume of both
devices. Some smartphone
requires you to setup the
Bluetooth headset as an audio
output device before sound is
transmitted. Please see the
instruction of your smartphone
for details. If you are using a
music player or other
Bluetooth device, please make
sure it supports A2DP stereo
music profile.

Q: I cannot hear the headset very

clearly.

A: Please adjust the volume on

your phone and headset.
Make sure there is no source
of interference nearby. Stay

close to your smartphone /
music player.

Q: The other person cannot hear

my call clearly.

A: Make sure your phone is not

connected to another
Bluetooth device. Bring your
smartphone closer to you and
reposition the headset.

Q: Where can I get more

technical support?

A: Please email us at

[e-mail].
Make sure you include your
purchase order ID for
reference purpose.

Maintenance

• Battery care: make sure you

turn off the headset when it is
not in use. If you have not used
the headset for more than 1
month, please make sure you
fully charge it before use.

• Cleaning: use a soft, dry cloth

the wipe the surface carefully.

Do not use liquid or sprays.

• To clean the tip: Gently pull out

the tip from the earpiece. Wash
and rinse with water only. Make
sure it is completely dry before
re-attaching to the earpiece.

• To clean the wire mesh on the

earpiece: Gently pull out the tip.
Lightly brush the mesh with a
soft, dry cloth. Avoid pressing
on the mesh.

Customer Support Contact

For additional assistance or

warranty cover claim, please

contact us:

E-mail:

[e-mail]

(all enquires)

Phone: [phone] # 4 (9:00

am – 6:00 pm PST, Monday to

Friday)

Trademark and license
agreement

®

Bluetooth

The Bluetooth word mark and
logos are owned by the

®

Bluetooth

SIG, Inc. and any use
of such trademark for this product
is under license. Other trademark
and trade names are those of
their respective owners.

®

QCY

QCY® and its logo are registered

and owned by QCY Inc. QCY
has agreed to grant TaoTronics
Inc, and Sunvalleytek Inc. sole
distribution rights for its “Jack”
J02 Bluetooth headset in North
America. Other distributors are
prohibited from operating retail,
wholesale, and any commercial
activities in North America for

®

QCY

“Jack” J02 Bluetooth

headset.

®