Suzuki GSX-R1000 2003-2004 Service Manual 2003-2004
Specifications and Main Features
- Model: 03-SUZUKI GSX-R1000K3
- Overall Length: 2,070 mm (81.5 in)
- Overall Width: 715 mm (28.1 in)
- Overall Height: 1145 mm (45.1 in)
- Wheelbase: 1,410 mm (55.5 in)
- Ground Clearance: 130 mm (5.1 in)
- Seat Height: 820 mm (32.3 in)
- Dry Mass: 168 kg (370 lbs)
- Wet Mass: 169 kg (372 lbs)
- Engine Type: Four stroke, liquid cooled, DOHC
- Displacement: 988 cc (60.3 cu in)
- Compression Ratio: 12.0:1
- Fuel System: Fuel injection
- Starter System: Electric
- Lubrication System: Wet sump
- Idle Speed: 1,150 ± 100 rpm
- Transmission: 6 speed constant mesh
- Gearshift Pattern: 1 down, 5 up
- Primary Reduction Ratio: 1.553 (73/47)
- Drive chain: DID 530, 110 links
- Front Suspension: Inverted telescopic, coil spring, oil damped
- Rear Suspension: Link type, coil spring, oil damped
- Front Brake: Disc brake, twin
- Rear Brake: Disc brake
- Front Tire Size: 120/70 ZR 17 M/C (58 W) tubeless
- Rear Tire Size: 190/50 ZR 17 M/C (73 W) tubeless
- Ignition Type: Electronic ignition transistors
- Battery: 12 V 36.0 kC (10 Ah)/10 HR
- Fuel Tank Capacity: 18 L (4.8/4.0 US/Imp gal)
- Engine Oil Capacity (with filter change): 3,300 ml (3.5/2.9 US/Imp qt)
Frequently Asked Questions
Q: What type of fuel do I fill in my tank for the Suzuki GSX-R1000?
A: Only add pump an unleaded gasoline with at least a 90 octane rating if you reside in Canada and USA. If you are from other regions, 95 octane or higher fuel based on the research method should be utilized.
Q: We have a Suzuki GSX-R1000, which engine oil is the best to be used?
A: For this engine oil to run, it is important to use SUZUKI PERFORMANCE 4 MOTOR OIL together with API service which is SF or SG with a viscosity of SAE 10W-40.
Q: With how many motorcycle rides should the engine oil have been replaced?
A: Replace the motorcycle engine oil when you near the limit of 1, 000km or reach 600 miles and a months time frame has been reached, 4, 000 miles or 6 months after the first point the replacement time limit reaches 6,000km.
Q: What is the maximum revs on the speedometer during the motorcycles break-in phase?
A: For the first 800 and 5, 000 miles motorcycles, do not cross the 6, 000rpm mark, until 1, 000 miles is reached stay under 9, 000rpm and once the 1, 000 miles mark has reached do not go above 12, 500rpm.
Q: How regularly should the brake fluid be changed?
A: The brake fluid must be changed once every two years.
Q: How is the valve clearance checked?
A: As a general rule, valve clearance is checked once every 24000 km (15000 Miles, 2 Years) of usage which involves taking off the cylinder head covers and measuring the clearance with a feeler gauge. These shims can be swapped out to help make adjustments.
Q: What should be the pressure of the front and rear tires?
A: For solo riding, the rear tire must maintain a pressure of 290 kPa (42 psi) while the front tire goes lower at 250 kPa (36 psi). For dual riding, the pressures remain the same.
User Manual
Loading...