USER MANUAL
rotary
®
Lex - rotary User Manual
Front Panel
FAST ROTOR SPEED: Controls
the speed of the rotors in FAST
speed.
MIC DISTANCE: Varies the
distance of the stereo mics from
the horn rotor and the single
mic on the woofer rotor. Turn
towards minimum for a more
pronounced, aggressive horn
sound with mics up close. Turn
towards maximum for more
ambience. The effect will be
most audible with the horn rotor.
®
PREAMP DRIVE: Controls the
drive of the rotary cabinet’s
tube preamp and phase inverter
stages. Turn up for a more
overdriven cab sound.
FAST ROTOR
SPEED
SLOW / FAST FOOTSWITCH:
Changes the motor speed from fast to
slow. HOLD for brake.
MIC DISTANCE
HORN LEVEL
rotary
BYPASS FOOTSWITCH:
Engages and disengages effect. Bypass mode is
true bypass. LED on indicates that the effect is
engaged.
PREAMP
DRIVE
BYPASSSLOW/FAST
®
HORN LEVEL:
Controls the output
level of the high
frequency horn
rotor.
pg 2
Lex - rotary User Manual
Secondary Functions
CAB DIRECTION: Changes the
position of the cabinet relative to
the microphones. In the FRONT
orientation (counterclockwise)
the sound travels through the
slats in the wood cabinet. In the
REAR orientation (clockwise),
the the cabinet is open for a
different sound. The default
position is REAR.
SLOW ROTOR
SPEED: Controls
the speed of the
rotors in SLOW
speed.
FAST ROTOR
SPEED
( SLOW ROTOR
SPEED )
( CAB
DIRECTION )
MIC DISTANCE
HORN LEVEL
( ACCELERATION )
REARFRONT
ACCELERATION: Controls
how quickly the rotors
transition from Fast to Slow
and from Slow to Fast speed.
The rotors will accelerate
independently. The low
frequency rotor accelerates
more slowly just like an actual
rotating speaker system.
PREAMP
DRIVE
( LEVEL )
®
LEVEL: Controls
the +/- 6dB boost
or cut when the
pedal is engaged
(12:00 on the
PREAMP DRIVE
knob is unity gain)
Hold down SLOW/FAST and BYPASS to access all secondary functions on
the knobs.
BYPASSSLOW/FAST
rotary
®
pg 3
Lex - rotary User Manual
Rear Panel
®
Standard 9V DC center
negative power input.
250 mA required
available current.
INPUT
High impedance
mono input.
EXP
OR
RIGHT OUTLEFT OUT
9VDC
+
-
Stereo outputs. Use LEFT
OUT for mono signal output.
If using in BI-AMP mode, the
Left out is the woofer and
the Right out is the horn.
Connect a Favorite Switch to save
your favorite setting or to toggle slow/
fast speeds remotely. To use a Favorite
switch, see page 5 for a detailed
explanation of set up.
TRS
®
FAVORITE
Connect a standard TRS expression
pedal for continuous control over
any selectable knob parameter. To
select the knob controlled by the
expression pedal, hold the SLOW/
FAST footswitch during power up.
The first knob turned is then then
assigned to the expression pedal.
The maximum position the knob is
turned up to becomes the expression
pedal “toe down” maximum value.
Moving the pedal to the “heel
down” position activates the rotor
brake when the expression pedal is
assigned to control speed.
pg 4
Lex - rotary User Manual
Power up settings
®
EXP INPUT ASSIGN: Assigns
the EXP pedal input jack to
use an expression pedal or a
Favorite switch. While holding
both footswitches at power up,
turn FAST ROTOR SPEED fully
counterclockwise for use with an
expression pedal. Turn knob fully
clockwise for use with a Favorite
Switch to save a favorite setting.
Turn knob to the middle position
to use a Favorite switch to toggle
between FAST and SLOW rotor
speeds.
EXP
PEDAL
EXTERNAL
SPEED SWITCH
FAST ROTOR
SPEED
CAB FILTER: Tailors the cabinet
filter for best use either in front
of a guitar amplifier or a full
range speaker system. While
holding both footswitches at
power up, turn MIC DISTANCE
fully counterclockwise for use
with a GUITAR AMP. Turn MIC
DISTANCE fully clockwise for
use with a FULL RANGE speaker
system, e.g. studio monitors.
Full range mode is also useful
for direct recording.
GUITAR AMP
MIC DISTANCE
FAV
SWITCH
HORN LEVEL
FULL RANGE SPEAKER
STEREO BI-AMP
PREAMP
DRIVE
BYPASSSLOW/FAST
rotary
BI-AMP: While holding both
footswitches at power up, turn
PREAMP DRIVE fully clockwise
for Bi-Amp ON. When in BIAMP
mode, the Left output is the
woofer signal and the Right
output is the horn signal. For
Bi-Amp OFF (stereo mode),
turn PREAMP DRIVE fully
counterclockwise.
When a knob is
adjusted, LEDs will
light up to indicate
which selection has
been made for each
start up setting. For
a counterclockwise
setting the SLOW/
FAST LED will light.
For a clockwise
setting the BYPASS
LED will light. For
a mid knob setting
both LEDs will light.
®
HOLD BOTH AT POWER UP
pg 5
Lex - rotary User Manual
Factory settings
Secondary functions: Cab direction set to REAR. All other secondary functions set to 50%
EXP input jack: Assigned to use an expression pedal and vary the SPEED from BRAKE to FAST
BI-AMP MODE: OFF
EXP INPUT ASSIGN: Assigned to use an expression pedal
CAB FILTER: Assigned to GUITAR AMP mode
(CAB
DIRECTION)
MIC DISTANCE
®
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
HORN LEVEL
(ACCELERATION)
PREAMP
DRIVE
(LEVEL)
pg 6
Lex - rotary User Manual
Sample Settings
®
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
(CAB
DIRECTION)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
PREAMP
DRIVE
(LEVEL)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(CAB
DIRECTION)
Mellowed Out Rotary Brake
(CAB
DIRECTION)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
PREAMP
DRIVE
(LEVEL)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(CAB
DIRECTION)
PREAMP
DRIVE
(LEVEL)
PREAMP
DRIVE
(LEVEL)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
Fat Harmonics Classic Ballad
(CAB
DIRECTION)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
PREAMP
DRIVE
(LEVEL)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(CAB
DIRECTION)
Maximum Drive Swirly Horn
(CAB
DIRECTION)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
PREAMP
DRIVE
(LEVEL)
FAST ROTOR
SPEED
(SLOW ROTOR
SPEED)
MIC DISTANCE
HORN LEVEL
(ACCELERATION)
(CAB
DIRECTION)
PREAMP
DRIVE
(LEVEL)
PREAMP
DRIVE
(LEVEL)
Distant Miking Slow Overdrive
pg 7
Lex - rotary User Manual
Features
• Hand crafted rotary algorithms for meticulous and nuanced recreations of rotary speaker systems
• Ultra Low Noise, high performance A/D and D/A Converters
• Premium analog front end and output section
• High Performance DSP
• Selectable cabinet orientation (front or rear facing)
• Fast and slow rotary speeds with independent horn and drum acceleration times
• Bi-amp output capability
• Stereo Output
• Expression pedal input with selectable control over any knob parameter
• Compatible with Favorite switch to save your favorite sound
• Remote switching of SLOW / FAST speeds with Favorite switch
• +/- 6dB level control
• SLOW / FAST footswitch with BRAKE feature
• Rugged & Lightweight Anodized Aluminum Chassis
• No-Nonsense User Interface
• True Bypass (electromechanical relay switching)
®
Specifications
Input Impedance 1Meg Ohm
Output Impedance 100 Ohm
Signal to Noise 110 dB
A/D & D/A 24-bit 96kHz
Frequency Response 20Hz to 20kHz
Max Input Level +8dBu
DSP performance 1596 MegaFLOPS
Bypass Switching True Bypass (electromechanical relay switching)
Dimensions 4.5” deep x 4” wide x 1.75” tall
Power Supply
Input Voltage 9VDC Center Negative
Required Current 250mA
pg 8
Lex - rotary User Manual
Strymon Non-Transferrable Limited Warranty
Warranty
Strymon warrants the product to be free from defects in material and workmanship for a period of one (1) year
from the original date of purchase. If the product fails within the warranty period, Strymon will repair or, at our
discretion, replace the product at no cost to the original purchaser.
Exclusions
This warranty covers defects in manufacturing discovered while using this product as recommended by
Strymon. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by
misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters.
Limits of Liability
In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the
preceding paragraphs. Strymon will not be held liable to any party for damages that result from the failure of
this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage
to other equipment, and incidental or consequential damages arising from the use, or inability to use this
product. In no event will Strymon be liable for more than the amount of the purchase price, not to exceed the
current retail price of the product. Strymon disclaims any other warranties, express or implied. By using the
product, the user accepts all terms herein.
®
How to Obtain Service Under this Warranty
For North American customers: Contact Strymon through our website at http://www.strymon.net/support for
Return Authorization and information. Proof of original ownership may be required in the form of a purchase
receipt.
For International Customers: Contact the Strymon dealer from which the product was purchased from in order
to arrange warranty repair service.
REV A
pg 9
Loading...