Stryker Speed-Sheet 6010 Operation Manual
Speed-Sheet™
Mo del 6010
For technical assistance:
USA: 1-800-327-0770
Operations Manual
2010/ 10 6010-009-001 REV D www.stryker.com
Warranty
Stryker EMS w arrants to the original p urchaser that the Str yker Speed-Sheet sh ould be free from manufactur ing
non-conform ances that affect product per formance and customer sat isfaction for a period of one (1) year after
date of deliver y. Stryker’s obl igation under this warran ty is expressly limited to su pplying replacement par ts.
STRYKER MAK ES NO OTHER WARRAN TY OR REPRESENTATION EITH ER EXPRESSED OR I MPLIED,
EXCEPT AS SET FOR TH HEREIN. THER E IS NO WARRANT Y OF MERCHANTABIL ITY AND THERE A RE NO
WARRANTI ES OF FITNESS FOR ANY PART ICULAR PURP OSE. IN NO EVENT SH ALL STRYKER BE LI ABLE
HEREUNDE R FOR INCIDENTAL OR CO NSEQUENTIAL DAM AGES ARISING FRO M OR IN ANY MANNE R
RELATED TO SALES O R USE OF ANY SUCH EQUIPME NT.
RETURN POLICY
Speed-Sheet may be returned up to 60 days of receipt under the following conditions:
Prior to 30 Days
• Product must b e unused, undamaged, and in the original packaging.
• Customer wil l receive a full refund.
Prior to 60 Days
• Product must b e unused, undamaged, and in the original packaging.
• Customer is res ponsible for a 15% restocking fee.
RETURN AUTHORIZATION
Stryker customer service department must approve any merchandise return and will provide an authorization
number to be printed on any returned merchandise. Stryker reserves the right to charge shipping and restocking
fees on returned i tems. SPECIAL, MODIF IED, OR DISCONTINUED I TEMS NOT SUBJECT TO RETUR N.
DAMAGED MERCHANDISE
ICC Regulati ons require that claim s for damaged merchand ise must be made with t he carrier within fif teen
(15) days of receipt of merchan dise. DO NOT ACCEPT DAMAG ED SHIPMENTS UNL ESS SUCH DAMAGE IS
NOTED ON THE DEL IVERY RECEIPT AT THE TI ME OF RECEIPT. Upon pro mpt notification, St ryker will file a
freight claim w ith the appropriate ca rrier for damages incu rred. Claim will be lim ited in amount to the actu al
replacement c ost. In the event that this inform ation is not received by Str yker within the fifteen (15) day period
following the de livery of the mercha ndise, or the damage wa s not noted on the delive ry receipt at the time
of receipt, the c ustomer will be respo nsible for payment of th e original invoice in fu ll. Claims for any short
shipment mus t be made within thirty (30) day s of invoice.
INTERNATIONAL WARRANTY CLAUSE
This warrant y reflects U.S. domestic po licy. Warranty outside the U. S. may vary by country. Pleas e contact your
local Stryker Medical representative for additional information.
PATENT INFORMATION
Stryker Spe ed-Sheet is covered by one or m ore of the following patents:
United States 7,650,654
The yellow and black c olor scheme is a proprie tary trademark of Str yker Corporation.
2010/ 10 6010-009-001 REV D www.stryker.com
CLEANING S PEED-SHEET (I F NOT ACTIVATED)
If Speed-Sheet was n ot activated for a patient transfer, it can be manually cleaned (up
to 10 times) and placed back on the cot mattres s for the next response. To clean, apply
one of the suggested clean ers by spray or pre-soaked wipes and allow th e cleaner
to dry. Inspect the cleaned Speed-Sheet for obvious damage (tears, abrasions, or
punctures) before placing it back on th e cot mattress to make sure that it was not
activated or damaged.
Suggested cleaners for Speed-Sheet include:
• Quaternary Cleaners (active ingredient - ammonium chloride)
• Phenolic Cleaners (active ingredient - o-phenylphenol)
• Chlorinated Bleach Soluti on (5.25% - less than 1 part bleach to 100 parts water)
Note: Use these cle aners in the concentrations recomme nded by their manufacturer.
Do not use Virex® T B germicidal or alcohol-base d products on Speed-Sh eet.
Cleaning
WARNING
• Do not place Speed-She et under patients that are not being tr ansported.
• Remove Speed-She et from under the patient if it is activated before the cot reaches
the receiving surface.
• Do not use Speed-Sheet to transfer patients with suspected spinal injuries.
• Do not attempt to transfer patien t loads greater than what the operators can s afely
manage. Evaluate the load and use additional assistance if necessary.
• Do not reuse an activated Spe ed-Sheet; it is not stable for patient tr ansport.
• Inspect Speed-Sheet for obvious damage (tears, abrasions, or punctures) before
placing it back on the cot mat tress to make sure that it was not activated or
damaged.
• Do not use a Speed-Sheet if any obvious damage is observed upon inspection.
• Failure to properly clean or dispose of a contaminated Speed-Sheet increases the
risk of exposure to bloodborne pathogens.
Note: Speed-Sheet is made with latex-free materials.
Safety Precautions
European Representative
Stryker France
ZAC Satolas Green Pusignan
Av. De Satolas Green
69881 MEYZIEU Cedex
France
EC REP
Manufactured Fo r
Stryker Medical
3800 E. Centre Av e.
Portage, MI 49 002
U.S.A.
Operation Guide
ALTERNATIVE USE: TRANSFERRING PATIENT ONTO COT
1. Remove one Speed-Sheet from the dispenser.
2. Verify that the Speed-Sheet has not reached its expiration date.
3. Unfold Speed-Sheet.
4. Gently tilt the patient o nto their side.
5. Center Speed-Sheet under the patient and put a linen sheet on top of Speed-Sheet.
6. Lower the patient onto the li nen sheet.
7. See Transferring Patient Off the Cot instruct ions to transfer the patient onto the cot.
Note: A separate Speed- Sheet may be prepared on the cot mattres s for later use
when transferring the p atient off the cot. That Speed-Sh eet should be tucked
underneath the Speed -Sheet that was placed under th e patient.
Operation Guide
TRANSFERRING PATIENT OFF THE COT
1. Position the cot alongside the receiving patient support platform.
2. Adjust the cot height so t he cot mattress is flat and approximately 1 in (2.5 cm)
above the receiving p atient support surface.
3. Secure the cot and patient su pport platform together to prevent s eparation.
4. Lower all siderails.
5. Tear at least one red tab 3-6 in (8-16 cm) to activate Speed-Sheet (Figure 3 or
Figure 4). Note: Tearing more than one tab can improve per formance.
6. With at least one operato r on each side of the patient, pull on the line n sheet to
transfer the patient (Figure 5).
Note: Pull on the linen sheet. Do NOT pull o n Speed-Sheet.
Pull horizontally. Do NOT lift the linen sh eet.
An overhand grip on the linen sheet e ncourages proper pulling technique.
If the patient’s condition permits, the op erator on the cot side of the
transfer may gently push on the p atient rather than grasping the linen
sheet.
7. Raise the siderails on bo th sides of the patient after the transfer.
8. Dispose of the activated Speed-Sheet according to local medical disposal protocol
and replace it with a new one b efore the next response.
Operation Guide
PREPARING THE COT BEFORE A RESPONSE
1. Remove one Speed-Sheet from the dispenser.
2. Verify that the Speed-Shee t has not reached its expiration date (Figure 1).
3. Unfold and center Speed-Sh eet directly on top of the cot mattres s.
4. Inspect Speed-Sheet for obvious damage (tears, abrasions, or punctures).
5. Place a linen sheet on top of Spee d-Sheet (Figure 2).
This manual is designe d to assist you with the operatio n of the Stryker Speed-Sheet™.
Read this manual thorou ghly before using the equipment and keep a c opy on file. To
ensure safe operation, estab lish procedures for training all staff acc ording to the usage
described in this manual.
INTENDED US E OF PRODUCT
The model 6010 Speed-Sheet is intended to be used by trained personnel as a manual
lateral patient transfer aid. The dev ice is primarily intended to ass ist in the transfer of a
body in a supine posi tion from an ambulance cot or mortuary cot to an adjac ent surface.
Alternatively, the device may be u sed to transfer a body from an adjacent surface onto
an ambulance cot or mor tuary cot.
PRODUCT DESCRIPTION
Speed-Sheet is a dis posable device that signific antly reduces the force required to
transfer a patient from one surface to an other. Speed-Sheet is stable before activati on,
so it can be placed on the cot m attress before a response and remain und er the patient
while they are transpor ted. When transferring the patient to an other support surface,
Speed-Sheet can then be activated to minimize the friction between the linen sheet
and cot mattress. Speed-Sheet also provides a fluid-impermeable barrier between the
patient and cot mattres s for faster clean up.
SPECIFICATIONS
10-Pack Part Number 6010-001- 010
Maximum Patient Weight 700 lb 318 kg
Speed-Sheet Dimensions 72 in x 23.5 in 183 cm x 60 cm
Dispenser Dimensions 12.75 in x 8.75 in x 4.75 in 32 cm x 22 cm x 12 cm
Dispenser Weight
(includes 10 Speed-Sheets)
4.5 lb 2 kg
Storage Temperature
-4°F - 104°F -20°C - 40°C
Storage Relative Humidity 0% - 100%
SYMBO LS
Introduction
Warning, consu lt
accompanying documentation
Single Use (when activated) Manual Cleaning
Resin Identification Code Batch Code Expiration Date
Relative Humidity Limitation Temperature Limitation Manufacturer
REF
Model Number
EC REP
Authorized Eur opean
Representative
Figure 2
Figure 3
Figure 4
Figure 5
WARNING/NOTE DEFINITION
The words WARNING and NOTE carry special meanings and should be carefully reviewed.
WARNING
Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may
also describe potential serious adverse reactions and safety hazards.
Note: Provides special information to make maintenance easier or important instructions clearer.
Figure 1
Speed-Sheet
Graphics Facing UP
Loading...