Strong SRT 8210 operation manual
Function
Kanäle
Information
Multimedia
listen
sicherung
Digital Terrestrial HD Receiver
SRT 8210
Bedienungsanleitung
User Manual
Picture similar
700
USB
EPG
Programm
TEXT
Teletext
4
Favoriten-
Kinder-
Model: Digital Terrestrial HD Receiver SRT 8210
Supplied by STRONG & Co, Japan
5 V
100 mA max.
ANT IN ETHERNET
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS
USB: 5 V
800 mA max.
AUDIO
L/R
OF DOLBY LABORATORIES
COAXIAL
S/PDIF
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
12 V
TV SCARTUSB
1.5 A, max. 18 W
Model: Digital Terrestrial HD Receiver SRT 8210
Supplied by STRONG & Co, Japan
5 V
100 mA max.
ANT IN ETHERNET
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS
COAXIAL
S/PDIF
OF DOLBY LABORATORIES
TV SCARTUSB
USB: 5 V
800 mA max.
AUDIO
L/R
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
12 V
1.5 A, max. 18 W
Model: Digital Terrestrial HD Receiver SRT 8210
Supplied by STRONG & Co, Japan
5 V
100 mA max.
ANT IN ETHERNET
Model: Digital Terrestrial HD Receiver SRT 8210
Supplied by STRONG & Co, Japan
5 V
100 mA max.
ANT IN ETHERNET
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS
COAXIAL
S/PDIF
COAXIAL
S/PDIF
OF DOLBY LABORATORIES
TV SCARTUSB
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS
OF DOLBY LABORATORIES
TV SCARTUSB
USB: 5 V
800 mA max.
AUDIO
L/R
USB: 5 V
800 mA max.
AUDIO
L/R
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
12 V
1.5 A, max. 18 W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
12 V
1.5 A, max. 18 W
Geliefert durch STRONG & Co., Japan
Vertreten durch STRONG Ges.m.b.H.
Franz-Josefs-Kai 1
1010 Wien, Österreich
Email: support_at@strong.tv
06 Apr 2016 13:55
Licenses
ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT
COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION
FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER
AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village,
Colorado 80111 U.S.A.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright
laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their
reproduction or disclosure, in whole or in part, or the production of derivative works therefrom
without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby
Laboratories. All rights reserved.
APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS
English
1
TABLE OF CONTENT
1.0 INTRODUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices 4
2.0 YOUR RECEIVER 5
2.1 DEFAULT PIN: 0000 5
2.2 Front Panel 5
2.3 Rear Panel 5
2.4 Remote control 5
2.5 Installing the batteries 6
2.6 Using the remote control 6
3.0 CONNECTION 7
3.1 Connecting to a terrestrial antenna 7
3.2 Connecting to TV with HDMI cable 7
3.3 Connecting to TV with SCART cable 7
3.4 Connecting a USB storage device 7
3.5 Connecting to Ethernet for RSS feeds and weather forecasts 7
3.6 Connection to main power supply 7
3.7 Extended connections for your home entertainment 8
4.0 STARTING UP FOR THE FIRST TIME 8
5.0 QUICK GUIDE TO USING YOUR RECEIVER 9
6.0 OPERATION 9
6.1 Changing channels 9
6.2 Info Banner 10
6.3 Selection of audio language 10
6.4 Teletext 10
6.5 Subtitles 10
6.6 EPG (Electronic Programme Guide) 11
7.0 MAIN MENU 11
7.1 Installation of channels 11
7.2 Channels edit and information 12
7.3 Settings 13
7.4 Multimedia 16
7.5 Network 18
7.6 Software update 18
A.1TROUBLESHOOTING 19
A.2TECHNICAL SPECIFICATIONS 20
2
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a
surface which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to
intense vibration and to any shock which may cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers, transformers, etc.
Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a
power cord with wet hands. It may cause an electric shock.
When the receiver is not used for a long period of time, you should unplug the power cord
from the wall socket.
Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, and only
after disconnecting from the mains voltage supply. Make sure no foreign objects fall through
the ventilation slots because this could cause fire or an electric shock.
Do not place any objects on top of the receiver because this might prevent proper cooling of
the components inside.
Safety Precautions
Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high
voltages and possible electrical hazards. Opening the receiver will void the warranty of the
product. Refer all maintenance or servicing to suitably qualified personnel.
When you are connecting cables, be sure that the receiver is disconnected from the mains
supply voltage. Wait a few seconds after switching off the receiver before you move the
receiver or disconnect any equipment.
It is a necessity that you only use an approved extension and compatible wiring that is suitable
for the electrical power consumption of the installed equipment. Please ensure that the
electrical power supply corresponds with the voltage on the electrical identification plate at the
back of the receiver.
If the receiver does not operate normally even after strictly following the instructions in this user
manual, it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against
mechanical shocks and moisture. When unpacking it, make sure that all the parts are included and
keep the packaging away from children. When transporting the receiver from one place to another
or if you are returning it under warranty conditions, make sure to repack the receiver in its original
packaging with its accessories. Failing to comply with such packaging procedures could damage the
product and void your warranty.
06 Apr 2016 13:55
English
3
1.3 Equipment Set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
Refer to the user manual of your TV and, if applicable, your antenna.
Make sure that the HDMI cable and, if applicable, outdoor components are in a good condition.
If you use the TV SCART connection, use a well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
Warning Indicates warning information.
Tips Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
Move to Represents a menu item within a window.
1.4 Accessories
Installation instructions
1 remote control unit
2x batteries (AAA type)
Power adapter12 V DC, 1.5 A
WARNING: The batteries should not be recharged, disassembled, electrically short-
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.
To ensure best performance of your USB storage device please format it via your receiver
(through the menu Multimedia) to FAT32 system. Other file systems are not all supported by
the receiver. However, it is possible to use already NTFS formatted disks.
STRONG cannot guarantee compatibility with all types of USB storage devices.
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max.5 V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
(Bold characters)
(Italic characters)
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
4
Loading...