ST STVP User Manual

Features

■ Free software

■ Supports Motorola S19 and Intel HEX formats

■ Load, Edit and Save executable and/or data

files generated by the Assembler/Linker or C
compilers

■ Erase, Program, View and Verify device Flash

memory contents

■ Project mode to automate all configuration and

programming tasks

■ Programming Toolkit with C/C++ source files

for creating a programming application based
on ST Visual Programmer (STVP)

■ STVP supports microcontroller programming

via a complete range of hardware development
tools and dedicated programmers, including:

– ST-LINK in-circuit debugger/programmer

for STM8 and STM32

– RLink in-circuit debugger/programmer for

STM8 and ST7
– STice advanced emulators for STM8
– ST7 Flash STICK in-circuit programmer
– ST7-EPB programming board
– ST7-DVP3 & DVP2 series emulators
– ST7-EMU3 series emulators

STVP

ST Visual Programmer

Data brief

Description

ST Visual Programmer (STVP) is a full-featured
software interface for programming ST Flash
microcontrollers. It provides an easy-to-use and
efficient environment for reading, writing to and
verifying device memory and option bytes. STVP
is delivered as part of the free ST MCU Toolset,
which includes the ST Visual Develop (STVD)
integrated development environment and the ST
Assembler Linker.

In addition, developers can take advantage of the
Free Programming Toolkit with C/C++ sources for
all the functions needed to develop a customized
programming interface based on STVP for any
supported ST programming hardware. It contains
source code for all the functions that allow a
programming application to access STVP’s low­level DLLs and program microcontrollers using
any of the supported programming hardware and
programming method (socket, in-circuit
programming or in situ programming).

September 2010 Doc ID 17955 Rev 1 1/3

For further information contact your local STMicroelectronics sales office.

www.st.com

3

Ordering information ST Visual Programmer (STVP)

Ordering information

The ST MCU Toolset with ST Visual Programmer, ST Visual Develop and Assembler Linker
tool chain is available for free download from ST. It is also provided on the software CD­ROM provided with all supported hardware tools.

Revision history

Table 1. Document revision history

Date Revision Changes

17-Sep-2010 1 Initial release.

2/3 Doc ID 17955 Rev 1