ST STGP3NB60F, STGD3NB60F, STGP3NB60FD, STGF3NB60FD, STGB3NB60FD User Manual

查询STGB3NB60FD供应商

STGP3NB60FD-STGF3NB60FD-STGB3NB60FD

N-CHANNEL 3A - 600V - TO-220/TO-220FP/DPAK/D

STGP3NB60F - STGD3NB60F

2

PAK

PowerMESH™ IGBT

TYPE

STGP3NB60F
STGD3NB60F
STGP3NB60FD
STGF3NB60FD
STGB3NB60FD

■ HIGH INPUTIMPEDANCE(VOLTAGE DRIVEN)

■ LOW ON-VOLTAGE DROP (V

■ LOW GATE CHARG E

■ HIGH CURRENT CAPABILITY

■ OFF LOSSES INCLUDE TAIL CURRENT

■ HIGH FREQUENCY OPERATION

■ SHORT CIRCUIT RATED

V

CES

600 V
600 V
600 V
600 V
600 V

V

CE(sat)

(Typ) @125°C

<2.4 V
<2.4 V
<2.4 V
<2.4 V
<2.4 V

)

cesat

I

C

@125°C

3A
3A
3A
3A
3A

DESCRIPTION

Using the lat es t high voltage tech nology based on a
patented strip layout, STMicroelec troni cs has de­signed an advanced family of IGBTs, the Power-

™

MESH

IGBTs, with outstanding performances.
The suffix “F” identifies a family optimized to achieve
very low s witc hing times for frequency applications
(<40 KHz)

TO-220

2

PAK

3

2

1

TO-220FP

3

1

DPAKD

3

2

1

3

1

INTERNAL SCHEMATIC DIAGRAM

APPLICATIONS

■ MOTOR CONTROLS

■ SMPS AND PFC IN BOTH HARD SWITCHING

Std. Version “D” Version

AND RESONANT TOPOLOGIES

ORDERING INFORMATION

SALES TYPE MARKING PACKAGE PACKAGING

STGP3NB60F GP3NB60F TO-220 TUBE

STGD3NB60FT4 GD3NB60F DPAK TAPE & REEL

STGP3NB60FD GP3NB60FD TO-220 TUBE
STGF3NB60FD GF3NB60FD TO-220FP TUBE

STGB3NB60FDT4

GB3NB60FD

2

PAK

D

TAPE & REEL

1/14June 2003

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit

TO-220FP DPAK

600 V

6A
3A

V

CES

V

ECR

V

I
I

I

CM

I

f

I

fm

P

TOT

Collector-Emitter Voltage (VGS=0)
Emitter-Collector Voltage 20 V
Gate-Emitter Voltage ±20 V

GE

Collector Current (continuous) at TC=25°C

C

Collector Current (continuous) at TC=100°C

C

()

Collector Current (pulsed) 24 A

(1)

Forward Current 3 A

(1)

Forward Current Pulsed 24 A
Total Dissipation at TC= 25°C
Derating Factor 0.55 0.2 0.47 W/°C

V

T

() Pulse width limited by safe operatingarea
(1) For “D”versiononly

Insulation Withstand Voltage A.C. -- 2500 -- V

ISO

Storage Temperature – 55 to 150 °C

stg

T

Max. Operating Junction Temperature 150 °C

j

TO-220/D2PAK

68 25 60 W

THERMAL DATA

TO-220/D2PAK

Rthj-case Thermal Resistance Junction-case Max 1.8 5 2.1 °C/W
Rthj-amb Thermal Resistance Junction-ambient Max 62.5 100 °C/W

Rthc-h Thermal Resistance Case-heatsink Typ 0.5 °C/W

ELECTRICAL CHARACTERISTICS (T

= 25°C UNLESS OTHERWISE SPECIFIED)

CASE

TO-220FP DPAK

MAIN PARAMETERS

Symbol Parameter Test Conditions Min. Typ. Max. Unit

V

BR(CES)

Collector-Emitter Breakdown
Voltage

I

CES

I

GES

Collector cut-off
(V

GE

Gate-Emitter Leakage
Current (V

V

GE(th)

V

CE(sat)

Gate Threshold Voltage
Collector-Emitter Saturation

Voltage

=0)

CE

=0)

IC= 250 µA, VGE= 0 600 V

V

= Max Rating, TC= 25°C

CE

= Max Rating, TC= 125°C

V

CE

V

=±20V,VCE= 0 ±100 nA

GE

V

CE=VGE,IC

VGE=15V,IC=3A
VGE=15V,IC=3A,Tj=125°C

= 250 µA

35V

1.9

1.6

50

100

2.4 V

µA
µA

V

2/14

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

SWITCHING PARAMETERS

Symbol Parameter Test Conditions Min. Typ. Max. Unit

V

g

fs

C

ies

C

oes

C

res

Q

g

Q

ge

Q

gc

t

d(on)

t

r

(di/dt)

Eon

t

c

tr(V

off

t

d(off

t

f

E

(**)

off

E

ts

t

c

tr(V

off

t

d(off

t

f

E

(**)

off

E

ts

Forward Transconductance
Input Capacitance

Output Capacitance
Reverse Transfer
Capacitance

Total Gate Charge
Gate-Emitter Charge
Gate-Collector Charge

Turn-on Delay Time
Rise Time

Turn-on Current Slope

on

Turn-on Switching Losses
Cross-over Time

Off Voltage Rise Time

)

Delay Time

)

Fall Time
Turn-off Switching Loss
Total Switching Loss

Cross-over Time
Off Voltage Rise Time

)

Delay Time

)

Fall Time
Turn-off Switching Loss
Total Switching Loss

=25V,Ic=3A

CE

=25V,f=1MHz,VGE= 0 230

V

CE

= 480 V, IC=3A,

V

CE

VGE=15V

VCC= 480 V, IC=3A
RG=10Ω,VGE=15V

= 480 V, IC=3ARG=10Ω

V

CC

VGE= 15 V,Tj = 125°C

=480V,IC=3A,

V

cc

R

=10Ω,VGE=15V

GE

Tj = 25 °C

=480V,IC=3A,

V

cc

RGE=10Ω,VGE=15V
Tj = 125 °C

2S

33

6

16

20 nC

1.5
8

12.5
4

840

31

220

60
105
150
125
149

490
174
230
305
295
326

pF
pF
pF

nC
nC

ns
ns

A/µs

µJ

ns
ns
ns
ns

µJ
µJ

ns
ns
ns
ns

µJ
µJ

COLLECTOR-EMITTER DIODE (“D” VERSION)

Symbol Parameter Test Conditions Min. Typ. Max. Unit

V

t

rr

Q

rr

I

rrm

Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.

2. Pulse width limited by max. junction temperature.

(**)Losses include Also the Tail (Jedec Standardization)

Forward On-Voltage If= 1.5 A

f

Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Current

I

f

I

f

Tj =125°C, di/dt = 100 A/µs

= 1.5 A, Tj = 125 °C
=3A,VR=35V,

1.31

0.95
45

70

2.7

1.8

V
V

ns
nC

A

3/14

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

Output Characteristics

Transconductance Collector-Emitter On Voltagevs Temperature

Transfer Characteristics

Collector-Emitter On Voltagevs Collector Current

4/14

Normalized Collector-Emitter On Voltage vs Te mp.

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

Gate Threshold vs Temperatur e

Normalized Breakdo wn Voltage vs Temperature

Gate Charge vs Gate-Emitter Voltag eCapacitance Variations

Total Switching Lo sses vs Gate Resistance

Total Switching Lo sses vs Temperature

5/14

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

Emitter-collector Diode Characteristics

Thermal Impedance for TO-220 / D2PAK

Turn-Off SOA

Thermal Impedance for TO-220FP

Thermal Impedance for DPAK

6/14

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

Fig. 2: Test Circuit For Induc tive Load SwitchingFig. 1: Gate Charge test Circuit

7/14

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

TO-220 MECHANICAL DATA

DIM.

A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034

b1 1.15 1.70 0.045 0.066

c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106

e1 4.95 5.15 0.194 0.202

F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107

L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154

L20 16.40 0.645
L30 28.90 1.137

øP 3.75 3.85 0.147 0.151

Q 2.65 2.95 0.104 0.116

MIN. TYP MAX. MIN. TYP. MAX.

mm. inch

8/14

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

TO-220FP MECHANICAL DAT A

DIM.

MIN. TYP. MAX. MIN. TYP. MAX.

A 4.4 4.6 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.7 0.017 0.027

F 0.75 1 0.030 0.039
F1 1.15 1.7 0.045 0.067
F2 1.15 1.7 0.045 0.067

G 4.95 5.2 0.195 0.204
G1 2.4 2.7 0.094 0.106

H 10 10.4 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 0.385 0.417
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366

Ø 3 3.2 0.118 0.126

mm inch

E

A

D

B

L3

L6

L7

¯

F1

F

G1

H

G

F2

123

L2

L4

9/14

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

P032P_B

TO-252 (DPAK) MECHANICAL DATA

DIM.

A 2.20 2.40 0.087 0.094
A1 0.90 1.10 0.035 0.043
A2 0.03 0.23 0.001 0.009

B 0.64 0.90 0.025 0.035
B2 5.20 5.40 0.204 0.213

C 0.45 0.60 0.018 0.024
C2 0.48 0.60 0.019 0.024

D 6.00 6.20 0.236 0.244

E 6.40 6.60 0.252 0.260

G 4.40 4.60 0.173 0.181

H 9.35 10.10 0.368 0.398
L2 0.8 0.031
L4 0.60 1.00 0.024 0.039
V2 0

MIN. TYP. MAX. MIN. TYP. MAX.

o

mm inch

o

8

o

0

o

0

10/14

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

D2PAK MECHANICAL DATA

DIM.

MIN. TYP MAX. MIN. TYP. MAX.

A 4.4 4.6 0.173 0.181
A1 2.49 2.69 0.098 0.106
A2 0.03 0.23 0.001 0.009

B 0.7 0.93 0.027 0.036
B2 1.14 1.7 0.044 0.067

C 0.45 0.6 0.017 0.023
C2 1.23 1.36 0.048 0.053

D 8.95 9.35 0.352 0.368
D1 8 0.315

E 10 10.4 0.393
E1 8.5 0.334

G 4.88 5.28 0.192 0.208

L 15 15.85 0.590 0.625

L2 1.27 1.4 0.050 0.055
L3 1.4 1.75 0.055 0.068

mm. inch

M 2.4 3.2 0.094 0.126
R 0.4 0.015

V2 0º 8º

3

11/14

1

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

DPAK FOOTPRINT

All dimensions are in m illimeters

TAPE AND REEL SHIPMENT (suffix ”T4”)*

TUBE SHIPMENT (no suffix)*

All dimensions

are in millimeters

REEL MECHANICAL DATA

DIM.

A 330 12.992
B 1.5 0.059
C 12.8 13.2 0.504 0.520
D 20.2 0.795
G 16.4 18.4 0.645 0.724
N 50 1.968
T 22.4 0. 881

mm inch

MIN. MAX. MIN. MAX.

TAPE MECHANICAL DATA

DIM.

A0 6. 8 7 0.267 0.275
B0 10.4 10.6 0.409 0.417
B1 12.1 0 .476

D 1.5 1.6 0.059 0.063

D1 1.5 0.059

E 1.65 1.85 0.065 0.073

F 7.4 7.6 0.291 0.299
K0 2.55 2.75 0.100 0.108
P0 3. 9 4.1 0.153 0.161
P1 7.9 8.1 0.311 0.319
P2 1. 9 2.1 0.075 0.082

R 40 1.574

W 15.7 16.3 0.618 0.641

* on sales ty pe

12/14

mm inch

MIN. MAX. MIN. MAX.

BASE QTY BULK QTY

2500 2500

STGP3NB60F/STGD3N B 60F/S TG P3N B 60FD/ST GF3NB60FD/STGB3NB60FD

D2PAK FOOTPRINT

TAPE AND REEL SHIPMENT (suffix ”T4”)*

TUBE SHIPMENT (no suffix)*

REEL MECHANICAL DATA

DIM.

A 330 12.992
B 1.5 0.0 59
C 12.8 13.2 0.504 0.520
D 20.2 0795

G 24.4 26.4 0.960 1.039

N 100 3.937
T30.41.197

mm inch

MIN. MAX. MIN. MAX.

TAPE MECHANICAL DATA

DIM.

A0 10.5 10.7 0.413 0.421
B0 15.7 15. 9 0.618 0.626

D 1.5 1.6 0.059 0.063

D1 1.59 1.61 0.062 0.063

E 1.65 1.85 0.065 0.073

F 11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082

R 50 1.574

T 0.25 0.35 0. 0098 0.0137

W 23.7 24. 3 0.933 0.956

* on sales

mm inch

MIN. MAX. MIN. MAX.

BASE QTY BULK QTY

1000 1000

13/14

STGP3NB60F/STGD3NB60F /ST GP3N B 60F D/S TG F3NB 60FD/ST GB3NB60FD

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of u se of such inf ormat ion nor for any in fring ement of p aten ts or othe r ri ghts of th ird p arties whic h may resul t f rom
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.

Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco

© The ST logo is a registered trademark of STMicroelectronics

© 2003 STMicroelectronics - Printed in Italy - All Rights Reserved

Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.

STMicroelectronics GROUP OF COMPANIES

© http://www.st.com

14/14