SPX Cooling Technologies Hexacool Air Cooled Condenser User Manual

Page 1
Hexacool® Air Cooled Condenser
/
/
Page 2
Introducing the Hexacool Air Cooled Condenser.
/
Since 1883, Balcke, Marley, and Ham­on Dry Cooling—the world renowned companies that formed SPX Cooling Technologies—have been the leaders in developing innovative solutions for cooling systems.
From this combined experience, SPX has achieved a worldwide prominence in the power generation and industrial markets. With several hundred dry cooling references and partners/sub­sidiaries on all continents, SPX Cool­ing Technologies is an innovation and technology leader in the field of Air Cooled condensers.
/
Hexacool for 20MW Biomass Plant
in Emichheim, Germany
/ Traditional Dry Cooling System /
ACCs for 15 MW Power Plant fueled with Dry-Waste Biomass from
the Olive-Oil Industry in Spain
A-Frame The base product is the
modularized A-Frame design for pow­er plants ranging from a few Mega­watts to several hundred Megawatts. This is a most effective solution for large power plants where air cooling is the designated steam condensa­tion system.
Direct System ACC – Principle
For small power and industrial ap­plications, a conventional A-Frame model may not be the most cost­effective solution. SPX Cooling Technologies engi­neers designed a standardized, modular system that would be low in cost, easy to erect and robust in performance.
Traditional A-Frame ACC Module
Page 3
/
Verticle Fin Tube Bundles
Access Platform
Main Steam Duct Inlet
Fan Drive Motor
Cladding
The Hexacool Air Cooled Condenser
Designed for Smaller Power and Industrial Plants.
/
A cost-effective, compact design with many
advantages over conventional
A-frame designs.
/ Hexacool Benefits /
Cost-Effective A cost-effective solution for a high quality product
Lighter Foundation loads are reduced
Reduced Height Low-profile design – total height is lower than an A-frame design. Easier integration in urban environments
Faster Installation Easy to erect in the field
Simplified Installation Procedure Compact simplified design with greater degree of prefabrication in workshop
Decreased Wind Sensitivity Improved performance during windy conditions
Reduced Hot Air Recirculation Induced draft concept reduces risk of hot air recirculation for higher efficiency in all operating conditions
Easy Access Unit designed for easier cleaning and maintenance
Low Impact, Aesthetic This innovative environmentally-friendly design is a trend-setter in the industry
Optional Layout Simplified piping and ducting routing
Page 4
/ Full Service Local Representation /
The Global Network of Dry Cooling
Belgium
SPX Cooling Technologies Belgium SA/NV Avenue Marcel Thiry 81, B2 B - 1200 Brussels, Belgium Phone: +32 (0)2 761 61 11 Fax: +32 (0)2 761 61 86 infobe@cts.spx.com www.spxcooling.com
France
SPX Cooling Technologies France S.A. 3, promenade de la Bonnette F - 92238 Gennevilliers, France Phone: +33 (0)1 47 99 60 40 Fax: +33 (0)1 47 99 60 50 infofr@cts.spx.com www.spxcooling.com
China
SPX Cooling Technologies Co. Ltd.17/F, Tower B, Gateway Plaza, 18 Xia Guang Li, North East 3rd Ring Rd. Chao Yang District 100027 Beijing, China Phone: +86 10 5926 7000 Fax: +86 10 5926 7018 infocn@cts.spx.com www.spxcooling.com
Germany
SPX Cooling Technologies GmbH Ernst-Dietrich-Platz 2 D - 40882 Ratingen, Germany Phone: +49 (0)2102 1669 0 Fax: +49 (0)2102 1669 215 infode@cts.spx.com www.spxcooling.com
Italy
SPX Cooling Technologies Italia SpA Via Raffaello Sanzio 2 (Corpo A) I - 21013 Gallarate (Va), Italy Phone: +39 0331 2484 11 Fax: +39 0331 2484 12 infoit@cts.spx.com www.spxcooling.com
South Africa
DB THERMAL, a division of DBT Technologies (Pty) Ltd Willow Place, Woodmead Business Park 140 Western Service Rd., Woodmead Ext. 17 Kelvin 2054, South Africa Phone +27 (0)11 236 6345 Fax +27 (0)11 236 6429 harros@dbthermal.co.za www.spxcooling.com
United States of America
SPX Cooling Technologies, Inc. 1200 U.S. Highway 22 East Bridgewater, N.J. 08807, USA Phone: +1 908 450 8008 Fax: +1 908 450 8050 infousa@ct.spx.com www.spxcooling.com
United Kingdom
SPX Cooling Technologies, UK Ltd. Gregory’s Bank, UK - Worcester. WR3 8AB, Phone: +44 (0) 1905 720 241 Fax: +44 (0) 1905 720 201 info.uk@cst.spx.com www.spxcooling.com
In the interest of technological progress, all products are subject to design and/or material change without notice. ©2008 SPX Cooling Technologies, Inc. Hexacool-07
Loading...