Spektrum SPMAR6400T User Manual

AR6400T User Guide

Bedienungsanleitung

Guide de l’utilisateur

AR6400T Guida per l’utente

AR6400T

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature, visit www.horizonhobby.com and click on the support tab for this product.

Meaning of Special Language:

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product: NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND little or no possibility of injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superﬁcial injury.

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS Thank you for purchasing a genuine Spektrum product. Always purchase from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM2 or Spektrum.

The AR6400T 6-channel Ultra Micro receiver with integrated servos, speed control and X-Port™ technology is designed for Ultra-Micro aircraft. Featuring DSM2™ technology the AR6400T is compatible with all Spektrum™, JR®, E-flite® and ParkZone® 2.4GHz DSM2 technology transmitters including: Spektrum DX8, DX7, DX6i, DX5e, Spektrum Module Systems, JR12X, JRX9303, E-flite LP5DSM, E-flite HP6DSM, E-flite MLP4DSM and ParkZone’s 2.4GHz DSM2 Transmitter.

Note: The AR6400T receiver is not compatible with the DX6 park flyer radio system.

Features

• 6-channel Ultra Micro receiver

• Two integrated linear long throw servos (elevator and rudder)

• Two integrated brushed speed controllers

• Weighs just 4.7 grams

• Compatible with optional Spektrum Ultra Micro linear servos; 1.5-gram

(SPMAS2000) 1.7-gram (SPMAS2000L)

• Smart Bind™ technology

• X-Port allows for future expansion

Applications

The AR6400T is designed for Ultra-Micro aircraft and is ideal for scratch-built ultra micro projects that require dual brushed ESC output. The AR6400T is designed to utilize a single-cell LiPo battery. Two integrated brushed speed controllers can be used to power brushed motors up to 2 amps of continuous current. An integrated X-Port feature allows for future expansion.

Note: When X-Port is active, CH5 and CH6 are not available; however, reversed aileron (CH2) is still available.

AR6400T Speciﬁcations:

Type: DSM2 Ultra Micro receiver with dual integrated brushed speed controllers and two linear

long throw servos Channels: 6 channels or 4 channels plus X-Port Modulation: DSM2 Dimension (WxLxH): 27.8 x 38.0 x 8.1mm Weight: 4.7 g Input Voltage Range: 3.2 to 4.2V 1-cell LiPo Antenna Length: 31mm Resolution: 1024 Compatibility: All DSM2 aircraft transmitters

Servos: Force: 2.8 oz (79 g) Stroke: 7.4mm Speed: 0.14 sec

Speed Controllers:

Type: Two Integrated brushed Max continuous current: 2.0 amps

US Patent D578,146. PRC patent ZL 200720069025.2. Other Patents Pending.

AR6400T Features and Ports

+ - + -

Dual Brushed Motor output

Antenna

Rudder (CH4)

servo

Battery input

Aileron (CH2)

Reversed Aileron (CH2) or Aux1 (CH6)

Elevator (CH3)

servo

+ -

ESC Brushed

ReceiverInstallation

It is recommended to use double-sided foam tape strips and/or minimal hot glue in the corners to install your receiver in the fuselage. Note that the servos need to be in the appropriate position to attach to and drive the elevator and rudder pushrods. Note: Installation will vary depending upon application.

X-Port (all 4 pins)

Gear (CH5) (lower 3 pins)

+ 9 hidden pages