TYPICAL SPECIFICATIONS
Frequency Response Mic/Line Input to any output, 20Hz - 20kHz ...................................... <1dB
THD + N Mic sens. -30dBu, +20dBu at all outputs @1kHz.......................... <0.006%
GRAHAM BLYTH
In the year of our 30th anniversary, Soundcraft
co-founder and Technical Director Graham Blyth has
taken a well established and classic Soundcraft
microphone preamplifier to a new level of performance,
resulting in the new GB30 preamp which boasts
extraordinary clarity with exceptionally controlled
overload characteristics.
Soundcraft’s legendary 4-band EQ has also been
improved further with the addition of elements derived
from Soundcraft’s highly successful MH Series consoles.
This new design delivers the sound of the classic ‘British
EQ’ enhanced even further with more focused HF and LF
shelving sections.
Noise Measured RMS, 22Hz to 22kHz Bandwidth
Mic E.I.N. @ unity gain,150Ω source impedance ........................... -128dBu
Mix Output, 32 inputs routed to mix .............................................. <-85dBu
Group Outputs ............................................................................... <-85dBu
Aux Outputs ................................................................................... <-83dBu
Matrix Outputs............................................................................... <-89dBu
Crosstalk Input Channel Mute......................................................................... <-93dB
(@1kHz, typical) Input Fader cut-off........................................................................... <-92dB
Pan isolation ................................................................................... <-70dB
Mix route isolation........................................................................... <-93dB
Group route isolation....................................................................... <-93dB
Adjacent channel crosstalk.............................................................. <-99dB
Group to Mix.................................................................................... <-90dB
Aux Send pots offness (typical) ....................................................... <-80dB
Matrix Send pots offness (typical) ................................................... <-80dB
CMRR Typical @ 1kHz .................................................................................... 80dB
Input & Output Mono & Stereo Mic Inputs.............................................................. +15dBu
Max Levels Mono Line Inputs............................................................................ +30dBu
Stereo Line Inputs........................................................................... +20dBu
Insert Returns .................................................................................+20dBu
Any output ...................................................................................... +20dBu
Nominal Operating Level ..................................................................... 0dBu
Headphone Power.................................................... 2 x 250mW into 200Ω
Input & Output Mic Inputs ............................................................................................ 2kΩ
Impedances Line Inputs and Stereo Returns .......................................................... 10kΩ
Input channels Insert Return ....................... 5kΩ with EQ in, otherwise 3kΩ
Mix, Group, Aux, Matrix & Direct outputs............................................ 150Ω
Insert sends ........................................................................................ 75Ω
Recommended Headphone Impedance ......................................... 50 - 600
4-BUS PROFESSIONAL MIXING CONSOLE
Soundcraft Registered Community Trade Mark/RTM No. 000557827
SOUNDCRAFT
HARMAN INTERNATIONAL INDUSTRIES LTD.,
CRANBORNE HOUSE, CRANBORNE ROAD
POTTERS BAR, HERTS, EN6 3JN, UK
T: +44 (0)1707 665000
F: +44 (0)1707 660742
E: info@soundcraft.com
SOUNDCRAFT USA
8500 BALBOA BLVD.
NORTHRIDGE, CA 91329, USA
T: +1-818-920-3212
F: +1-818-920-3208
E: soundcraft-usa@harman.com
www.soundcraft.com
Soundcraft reserves the right to improve or otherwise alter any
information supplied in this document or any other documentation
supplied hereafter. E&OE 05/06
This equipment complies with the EMC Directive 89/336/EEC
Power consumption AC mains supply (internal PSU) 85V-270V AC,
50/60Hz universal input
Power consumption............................................................ Less than 150W
Operating conditions Temperature range............................................................. -10ºC to +30ºC
Relative humidity........................................................................ 0% to 80%
DIMENSIONS
Frame Size Width (Y) Width (X) Weight
16 Ch 790mm (31.10") 688mm (27.07") 22kg (48.5lbs)
24 Ch 1013mm (39.88") 911mm (35.87") 25kg (55.1lbs)
32 Ch 1247mm (49.09") 1145mm (45.08") 30kg (66.15lbs)
Dimension Y
Dimension X
656mm (25.81")
Note: These figures are typical of performance in a normal electromagnetic environment.
Performance may be degraded in severe conditions. All measurements refer to
electronically balanced inputs and outputs with VCAs enabled. Input and output
transformers may affect these specifications.
10mm (0.38")
159mm (6.24")
GB2 OVERVIEW GB2 SYSTEM BLOCK DIAGRAM
INPUTS
KEY FEATURES
• 16, 24 and 32 channel configurations
• Individually switched 48V phantom power on
every input module
• 6 Aux sends
• 4 Sub groups (paired)
• 6 x 2 Output matrix
• GB30 mic pre-amp
• 4-band GB30 EQ
• Integral power supply, with an external power
supply link option
• All metal TRS jacks and Neutrik XLRs
• Direct outputs on all mono input channels
The GB2 is the latest addition to the Soundcraft GB Series,
featuring 4 group busses configured as 2 stereo subgroups and
an integral 6 x 2 matrix. Intended for installed-sound and
Audio-Visual applications that do not require the functionality
provided by the GB4 or GB8, the GB2 is available in frame
sizes of 16, 24 and 32 mono inputs, each with 2 stereo inputs
as standard. Each input features the high-performance GB30
Mic Pre and GB30 Equaliser designs of the GB4 and GB8,
along with 6 Aux buses.
Four Subgroups are provided as two stereo pairs, with a unique
facility for adjusting the width of the stereo signal across the
stereo mix. The channel pan settings are retained on the group
outputs, while the degree of stereo separation to the mix bus is
independently adjustable from full stereo through to mono. The
GB2 also features two stereo input channels, with separate mic
and line inputs. In normal use, the mic inputs are routed to the
local channel and the line inputs act as a stereo return to the
mix bus. Selecting the LINE input to the local channel overrides
the Mic inputs.
Mono Inputs
Individual +48V Phantom Power switch
Phase Reverse switch
Mic Input with 10 to 60dB gain (Line Input -20dB)
100Hz HPF
Insert point
4-band EQ with sweep mids
6 Auxes, 1&2 pre, 3&4 pre/post, 5&6 post (user option for
5&6 follow 3&4, and pre-fade=pre-EQ)
Mute switch with LED
Routing to Stereo Mix, Sub Group 1-2, Sub Group 3-4
Peak & Signal LEDs
PFL switch with LED
Channel direct out with pre/post switch (switch on rear con)
Stereo Inputs
Stereo Mic Inputs with 10 to 60dB gain
Individual +48V Phantom Power switch
Phase Reverse switch
Separate Stereo Line Input, with Level Control, switchable direct to Mix
as a stereo return, or into local channel (replacing Mic signal)
Stereo/Mono source switching
4-band EQ
Auxes and routing as Mono Inputs
Sub Groups
Sub Group inserts
Separate L-R Sub Group Faders
Sub Group outputs on XLRs
Sub Group routing to Mix, with Width control
PFL with LED
Mix Outputs
Mix Inserts
Stereo Mix Fader
Mix Outputs on XLRs
Mono Sum Output on XLR
Other features
6x2 Matrix (Groups, L, R)
Matrix master level controls with MUTE & AFL switches, & LEDs
Matrix Outputs on XLRs
Aux master controls with AFL switches and LEDs
Aux Outputs 1-4 on XLRs, 5-6 on TRS jacks
Headphone and Control Room outputs with level control
Monitor switching for 2-TK Replay, Mix, Sub 1-2 & Sub 3-4
2-TK replay routing switch to Mix
Dual 12-segment LED Peak Reading output metering
Talkback mic input, routing to Aux 1-4 and Subgroups
Record outputs on RCA Phonos
2-TK Replay inputs on RCA phonos
2 Lamp connectors
MASTER
SECTION
GB2 Mono
Input Channel
GB2 Stereo
Input Channel