SoundCraft DPS-3 User Manual

Soundcraft DDPS-33 PPower SSupply
USER GUIDE
and
TECHNICAL MANUAL
1
© Harman International Industries Ltd. 2004 All rights reserved
Parts of the design of this product may be protected by worldwide patents.
Part No. ZM0317-01
Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for loss or dam­age whatsoever arising from the use of information or any error contained in this manual.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Soundcraft.
Harman International Industries Limited. Cranborne House, Cranborne Road, Potters Bar, Hertfordshire, EN6 3JN UK.
Tel: +44 (0) 1707 665000 Fax: +44 (0) 1707 660742
Email: info@soundcraft.com
www.soundcraft.com
IMPORTANT
Please read this manual carefully before
connecting your DPS-3 Power Supply
Unit to the mains for the first time.
Part No. ZM0317-02
2
Contents
Safety Symbol Guide ..............................................................................................................4
Important Safety Instructions ................................................................................................5
Fitting The Feet Or Rackmounting ..........................................................................................7
Connecting Up.......................................................................................................................8
Pin-outs Of DC Output Connector ...........................................................................................8
Circuit Diagram ..................................................................................................................... 9
PCB Layout .......................................................................................................................... 10
Parts List.............................................................................................................................11
Dimensions .........................................................................................................................14
Warranty..............................................................................................................................15
3
CAUTIONS
Must be followed carefully to avoid bodily injury.
WARNINGS
Must be observed to avoid damage to your equipment.
NOTES
Contains important information and useful tips on the
operation of your equipment.
SAFETY SSYMBOL GGUIDE
For your own safety and to avoid invalidation of the warranty all
text marked with these Symbols should be read carefully.
4
IMPORTANT SSAFETY IINSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths, curtains etc. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of a polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electri­cian for replacement of the obsolete outlet
Protect the power cord from being walked on or pinched particularly at plugs, conve­nience receptacles and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. It is recommended that all mainte­nance and service on the product should be carried out by Soundcraft or its autho­rised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.
5
Loading...
+ 11 hidden pages