SoundCraft DPS-2 User Manual

Download

Soundcraft DDPS-22 PPower SSupply

DPS-2 Power Supply i

Soundcraft DDPS-22 PPower SSupply

Contents

Contents i

Safety Symbol Guide ii

Approvals and Notice iii

Warranty iv

Important Safety Instructions - Cautions v

Warnings vi

Connecting up vii

Dimensions viii

Pin Outs of DC Output Connector ix

ii DPS-2 Power Supply

CAUTIONS

Must be followed carefully to avoid bodily injury.

WARNINGS

Must be observed to avoid damage to your equipment.

NOTES

Contains important information and useful tips on the

operation of your equipment.

SAFETY SSYMBOL GGUIDE

For your own safety and to avoid invalidation of the warranty all

text marked with these Symbols should be read carefully.

DPS-2 Power Supply iii

Parts of the design of this product may be protected by worldwide patents.

Part No. ZM0267 Issue 1

Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for loss or damage whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Soundcraft.

Harman International Industries Limited. Cranborne House, Cranborne Road, Potters Bar, Hertfordshire, EN6 3JN UK.

Tel: +44 (0) 1707 665000 Fax: +44 (0) 1707 660742

Email: info@soundcraft.com

Website: http://www.soundcraft.com

IMPORTANT

Please read this manual carefully before connecting your DPS-2 Power

Supply Unit to the mains for the first time.

iv DPS-2 Power Supply

WARRANTY

1 Soundcraft is a trading division of Harman International Industries Ltd .

End User means the person who first puts the equipment into regular

operation.

Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor.

Equipment means the equipment supplied with this manual.

2 If within the period of twelve months from the date of delivery of the

Equipment to the End User it shall prove defective by reason only of faulty materials and/or workmanship to such an extent that the effectiveness and/or usability thereof is materially affected the Equipment or the defective component should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components. Any components replaced will become the property of Soundcraft.

3 Any Equipment or component returned will be at the risk of the End User

whilst in transit (both to and from the Dealer or Soundcraft) and postage must be prepaid.

4 This warranty shall only be valid if:

a) the Equipment has been properly installed in accordance with instructions contained in Soundcraft’s manual; and

b) the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and

c) no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjustments or repairs to the Equipment; and

d) the End User has used the Equipment only for such purposes as Soundcraft recommends, with only such operating supplies as meet Soundcraft’s specifications and otherwise in all respects in accordance Soundcraft’s recommendations.

5 Defects arising as a result of the following are not covered by this

Warranty: faulty or negligent handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

6 The benefit of this Warranty may not be assigned by the End User.

7 End Users who are consumers should note their rights under this Warranty

are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment.

DPS-2 Power Supply v

IMPORTANT SSAFETY IINSTRUCTIONS

CAUTlON

To avoid the risk of fire, replace the mains fuse only with the correct type

and value fuse, as marked on the rear panel.

l AVIS: - AFIN DE REDUIRE LE RISQUE DE FEU REMPLACER SEULEMENT AVEC

FUSIBLE DE MEME TYPE.

l REPLACING MAINS FUSE

Switch the ON/OFF switch to the OFF position. Remove the mains lead from the connector. Use a small screwdriver to prise the fuse carrier from its location in the connector. Check the fuse and replace if necessary; also check that the voltage selection is correct for the mains supply level before switching the unit ON again. If the mains fuse fails repeatedly this may be because an electrical safety hazard exists. The unit must be taken out of service and referred to the Soundcraft dealer from where the equipment was purchased.

l THIS UNIT MUST BE EARTHED

Under no circumstances should the mains earth be disconnected from the mains lead.

l AVIS: - CET APPAREIL DOIT ETRE BRANCHE A LA TERRE.

l The wires in the mains lead are coloured in accordance with the following code:

Replacement Part No: FJ8016 (UK) : FJ8017 (EU) : FJ8018 (US & CAN)

UK & EU

US & CAN

Earth: Green and Yellow Green/Yellow Neutral: Blue White Live: Brown Black

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and / or Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol.

The wire which is coloured Blue or White must be connected to the terminal in the plug which is marked with the letter N.

The wire which is coloured Brown or Black must be connected to the terminal in the plug which is marked with the letter L.

Ensure that these colour codings are followed carefully in the event of the plug being changed.

l Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. when the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

l This unit is capable of operating over a range of mains voltages as marked on the rear panel.

It is important to ensure that the correct mains fuse is fitted before switching on the unit.

l Do not install near any heat sources such as radiators, heat resistors, stoves, or other appa-

ratus (including amplifiers) that produce heat.

l Do not use this apparatus near water.

l Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles and the point where they exit from the apparatus.

l Only use attachments/accessories specified by the manufacturer.

l Unplug this apparatus during lightning storms or when unused for long periods of time.

vi DPS-2 Power Supply

l Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way such as power-supply cord or plug is damaged., liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

l It is recommended that all maintenance and service on the product should be

carried out by Soundcraft or its authorised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel.

l Use only with a cart, stand, hood, bracket or table specified by the manufacturer or sold

with the apparatus. When a cart is used, use caution when moving the cart apparatus combination to avoid injury from tip-over.

WARNINGS

l Read these instructions.

l Keep these instructions.

l Heed all warnings.

l Follow all instructions.

l This unit contains no user serviceable parts. Refer all servicing to a qualified ser-

vice engineer, through the appropriate Soundcraft dealer.

l Clean only with a dry cloth.

l Do not block any of the ventilation openings. Install in accordance with the manu-

facturers instructions.

RM1d Console

Ensure that only the DPS-2 Power Supply Unit is connected to the RM1d

console.

DPS-2 Power Supply vii

CONNECTING UUP

Before you start

Ensure the DPS-2 power supply is NOT connected to the Mains and is turned OFF.

The Power supply can be positioned anywhere within reach of the RM1d and an available power socket, but is best rackmounted in a position where airflow through the vents is not obstructed and where the power switch or cables cannot be accidentally knocked. Although not essential to the correct operation of the RM1d, a maintained power feed is desirable to protect the station output in case of mains failure. However, if a UPS is to be shared with other items of equipment, ensure that the total load does not exceed the rated specification of the UPS. Connect the multi-way power cable between the DPS-2 External Power Supply and the RM1d Power connector. Screw the connector locking ring clockwise on both units to secure the cable. The locking ring should be firm, but not tight. Connect an IEC type mains cable with the plug fused at 3 AMPS, to the mains input socket on the DPS-2. Connect the other end to the nearest plug socket and switch on the power to the DPS-2.

The RM1d should take around 40 seconds to boot up. Please be patient!

For further information, please refer to the RM1-d User Guide, part number ZM0235.

viii DPS-2 Power Supply

DIMENSIONS

DPS-2 Power Supply ix

PIN-OOUTS OOF DDC OOUTPUT CCONNECTOR

DPS-2 User Guide