Sony XM-604EQX Marketing Specifications

2000 MOBILE PRODUCT GUIDE – PART 2

OTL (output transformerless) Circuit Pulse Power Supply

RCA Pin Jacks High Level Input Connector

Speaker Terminals

2-8 ohms (stereo) 4-8 ohms (when used as bridging amplifier)

60 W x 4 (20-20 kHz, 0.04% THD, at 4 Ω ) 75 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω ) 150 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω )

120 W x 4 (at 4 Ω) 120 W x 2 + 300 W x 1 (at 4 Ω) 300 W x 2 (at 4 Ω) 50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ±12 dB 5-100 Hz (+0/-3 dB)

0.005% or less (at 1 kHz, 4 Ω)

0.2-4.0 V (RCA pin jack); 0.4-8.0 V (high level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 12 V DC Car Battery (negative ground)

10.5-16 V At Rated Output: 36 A Remote Input:1.5 mA Approx. 282 x 55 x 320 mm (11

/8 x 21/4 x 125/8 in.) (not including projecting parts and controls) Approx. 3.3 kg (7 lb. 4 oz.) (not including accessories) Mounting Screws (4); Terminal Cap (1)

Specifications

Circuit System

Inputs

Outputs

Speaker Impedance

Rated Outputs (at 14.4 VDC)

Maximum Output

Equalizer Frequency Response Harmonic Distortion Input Level Adjustment Range High-Pass Filter Low-Pass Filter Power Requirements Power Supply Voltage Current Drain

Dimensions (w/h/d)

Weight Supplied Accessories

XM-604EQX

4/3/2 Channel Amplifier/EQ

• F&R 5 Band +/-12 dB Adjustable EQ

• 50/200/800/3.2k/12.8 kHz Frequency Centers

• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter

• Recessed Controls w/Level LEDs

• Heavy-Duty Connectors

• 60 W x 4 Ch at 0.04% THD

• 60 W x 2 + 150 W x1 at 0.1% THD

• 150 W x 2 at 0.1% THD

• RCA and Speaker Level Inputs

• Regulated MOSFET Power Supply

Design and specifications subject to change without notice.

2000 MOBILE PRODUCT GUIDE – PART 2

XM-604EQX

4/3/2 Channel Amplifier/EQ