Sony XM-405EQX Marketing Specifications

2000 MOBILE PRODUCT GUIDE – PART 2

OTL (output transformerless) Circuit Pulse Power Supply

RCA Pin Jacks High Level Input Connector

Speaker Terminals

2-8 ohms (stereo) 48 ohms (when used as bridging amplifier)

40 W x 4 (20-20 kHz, 0.04% THD, at 4 Ω) + 100 W x 1 (20-200Hz 0.04% THD, at 4 Ω) 50 W x 4 (20-20 kHz, 0.1% THD, at 2 Ω) + 125 W x 1 (20-200Hz 0.1% THD, at 2 Ω)

100 W x 2 (20-20 kHz, 0.1% THD, at 4 Ω) + 100 W x 1(20-200Hz 0.04% THD, at 4 Ω)

80 W x 4 + 200 W x 1 (at 4 Ω)

50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ±12 dB 5-100 Hz (+0/-3 dB)

0.005% or less (at 1 kHz, 4 Ω)

0.2-4.0 V (RCA pin jack); 0.4-8.0 V (high level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40Hz) 12 V DC Car Battery (negative ground)

10.5-16 V At Rated Output: 33 A Remote Input: 1.5 mA Approx. 282 x 55 x 450 mm (11

/8 x 21/4 x 173/4 in.) (not incl. projecting parts and controls) Approx. 4.7 kg (10 lb. 6 oz.) (not including accessories) Mounting Screws (4); Terminal Cap (1)

Specifications

Circuit System

Inputs

Outputs

Speaker Impedance

Rated Outputs (at 14.4 VDC)

5 Speaker

3 Speaker

Maximum Output

Equalizer Frequency Response Harmonic Distortion Input Level Adjustment Range High-Pass Filter Low-Pass Filter Low Boost Power Requirements Power Supply Voltage Current Drain

Dimensions (w/h/d) Weight Supplied Accessories

XM-405EQX

5/3 Channel Amplifier/EQ

• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter

• 50/200/800/3.2k/12.8kHz Frequency Centers

• F/R/S 5+5+1 Band +/-12 dB Adjustable EQ

• Recessed Controls w/Level LEDs

• Optional XA-SLC Remote Sub-Level Control

• 40 W x 4 + 100 W, 4Ω at 0.04% THD

• 55 W x 4 + 125 W, 2Ω at 0.1% THD

• 100 W x 2 + 100 W, 4Ω at 0.1% THD

• RCA and Speaker Level Inputs

• Regulated MOSFET Power Supply

Design and specifications subject to change without notice.

2000 MOBILE PRODUCT GUIDE – PART 2

XM-405EQX

5/3 Channel Amplifier/EQ