SONY XC-7500, XC-8500CE User Manual
Component/OEM
Progressive Scan B/W CCD Camera Module
XC-7500
XC-8500CE
CMA-87
XC-7500
1/2" IT CCD
659(H) X 494(V),EIA
CMA-87
OUTLINE DIMENSIONS
The XC-7500/XC-8500CE is a frame shutter camera that mounts a newly developed
CCD. Square grid cells most suitable for a machine vision are used for this CCD that
enables all pixels to be read. The resolution is equal in the vertical and horizontal
directions. Therefore, it is not required to correct the dimension on the image
processing side. The XC-7500 conforms to an EIA system of 659 (H) × 494 (V), and
the XC-8500CE conforms to a higher-resolution CCIR system of 782 (H) × 582 (V).
The XC-7500 and XC-8500CE enable a trigger frame shutter (E-DONPISHA) control
function, signal format conversion function, and high-rate scanning function when they
are connected with an optional memory adaptor (CMA-87). Moreover, the still pictures
of various high-speed movable objects can be read at a high resolution (in the horizontal
and vertical directions).
FEATURES
XC-7500/XC-8500CE
● 1/2" Hyper HAD IT CCD
● Square Pixels 9.9 x 9.9µm(XC-7500), 8.3 x 8.3µm(XC-8500CE)
● Frame Shutter
Normal : 1/60 to 1/10,000sec., 1/50 to 1/10,000sec., Flickerless
E-DONPISHA :
Low-Speed :
Normal-Speed : 1/1,000 to 1/11,000sec., 1/1,000 to 1/10,000sec.
High-Speed : 1/10,000 to 1/100,000sec.
External Control :
● Three Mode Outputs
Interlace(1/60sec., 1/50sec.)-2I mode
Non interlace(1/60sec., 1/50sec.)-2N mode
Non interlace(1/30sec., 1/25sec.)-1N mode
● Restart Reset Function (Trigger Input)
CMA-87
● E-DONPISHA (Frame Shutter) Control
● Signal format conversion EIA/CCIR, VGA/SVGA
● High-Rate scan-Up to 4
to approx.1/60sec., ∞to approx.1/50sec.
∞
to 1/60 to 1/10,000sec., ∞to 1/50 to 1/10,000sec.
∞
XC-8500CE
1/2" IT CCD
782(H) X 582(V), CCIR
XC-7500/8500CE
CMA-87
unit : mm
CONNECTIONS
C-mount lens
VCL-08YM
F1.4 8mm
VCL-12YM
F1.8 12mm
VCL-16Y-M
F1.4 16mm
VCL-25Y-M
F1.6 25mm
VCL-50Y-M
*IR cut filter can
be screwed out.
→
LO-75D for
adjusing FB
(as an option)
LO-77ERK VCT-37 VCT-75I
30 ø 0.5, 1.5, 10, 22mm
Extension Ring Kit
45mm MACRO LENS
2/3"
Tripod Attachment
50mm MACRO LENS
1"
Isolate
Camera Cable
12p-12p (SHIELD)
6p-6p
Trigger Cable
CCXC-6P05
CCXC-12P02S
05S
10S
25S
Camera
Adaptor
DC-777
DC-77RR
CMA-87
Junction Box
JB-77
DC12V
←
VIDEO 1
→
VIDEO 2
→
H/V,VS
←
AC100V
←
VIDEO 1
→
H/V, VS
←
*VIDEO 2 is not available
AC100V
←
VIDEO 1
→
H/V,VS
←
*VIDEO 2 is not available
DC12V
←
VIDEO
→
(VIDEO 1+VIDEO 2)
H/V,VS
←
*Can be slotted in DC-77RR.
The XC-7500 can be used in serial numbers 500001 and
later. When the XC-7500 of serial numbers 100001 to
101100 is used, consult the sales person in charge.
F2.8 50mm
F3.2 45mm
XC-7500 use 60mm fairiy
F2.8 50mm
100m fairiy
REAR SWITCHES&CONNECTORS
12P MULTI
Pin No. EXTERNAL SYNC MODE INTERNAL Pin No. EXTERNAL SYNC MODE INTERNAL
1 GND GND GND 7 VD IN VS IN VD OUT
2 +12V +12V +12V 8 VIDEO(G) VIDEO(G) VIDEO(G)
3 VIDEO(G) VIDEO(G) VIDEO(G) 9 VIDEO OUT2 VIDEO2 VIDEO OUT2
4 VIDEO OUT1 VIDEO1 VIDEO OUT1 10 GND GND GND
5 HD(G) HD(G) 11 +12V +12V +12V
6 HD IN HD OUT 12 VD(G) VS(G) CD(G)
2N 1/60S NON INTER
2I 1/60S INTERLACE
IN 1/30S NON INTER
ED E-DONPISHA
N NORMAL
R.R RESTART RESET
HD/VD VS SYNC MODE HD/VD VS SYNC MODE
VIDEO OUT MODE
SHUTTER MODE
12Pin Connector
6P MULTI
Pin No. SIGNAL
1 CTL IN/ FLD OUT
2 TRIGGER IN
3GND
4 WE OUT
5 AI VIDEO OUT
6 +12V OUT
6Pin Connector
*
GAIN MODE
A AUTO GAIN
F FIX GAIN
M MANUAL GAIN
MANUAL GAIN
CONTROL VOLUME
CTL IN/FLD OUT
* CTL IN is very useful for monitoring the normal
image during E-DONPISHA.Serial numbers
100201 and later are set to CTL IN at the
factory.Therefore, a video signal is usually
output when pin 1 is connected to ground
(GND) during E-DONPISHA setting. In the
XC-7500, serial numbers 100001 to 100200
are set to FLD OUT at the factory.To set serial
numbers 100201 and later to FLD OUT, the
XC-7500 must be changed internally.
Loading...