Sony XAVV630BT User Manual

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\010COV.fm masterpage: Cover

010COV.fm Page 1 Monday, July 13, 2015 4:28 PM

4-577-696-11(1)

AV Center

Owner’s Record

The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

Operating Instructions

Mode d’emploi

Manual de instrucciones

To cancel the demonstration (Demo) display, see page 20.

For the connection/installation, see page 33.

Pour annuler l’affichage de demonstration (Demo), reportezvous a la page 22.

Pour le raccordement/l’installation, reportez-vous à la page 37.

Para cancelar la pantalla de demostracion (Demostración), consulte la página 22.

Para la conexión/instalación, consulte la página 36.

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\020INT.fm masterpage: Left

010book.book Page 2 Monday, July 13, 2015 4:36 PM

For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. For details, see “Connection/Installation” (page 33).

This manual contains instructions for XAVW650BT and XAV-V630BT. XAV-W650BT is the model representatively used for illustration purposes.

The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.

Warning

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ˋ Reorient or relocate the receiving antenna. ˋ Increase the separation between the

equipment and receiver.

ˋ Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

ˋ Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including Interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

For the State of California, USA only

Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate

Note on the lithium battery

Do not expose the battery to excessive heat such as direct sunlight, fire or the like.

Warning if your car’s ignition has no ACC position

After turning the ignition off, be sure to press and hold HOME on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain.

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

2GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\020INT.fm masterpage: Right

010book.book Page 3 Monday, July 13, 2015 4:36 PM

Important notice

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.

Dear customer, this product includes a radio transmitter. Please check your vehicle operation manual or contact the manufacturer of your vehicle or your vehicle dealer, before you install this product into your vehicle.

Emergency calls

This BLUETOOTH car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).

On BLUETOOTH communication

ˎ Microwaves emitting from a BLUETOOTH device

may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident. ˋ where inflammable gas is present, in a hospital,

train, airplane, or petrol station

ˋ near automatic doors or a fire alarm

ˎ This unit supports security capabilities that

comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.

ˎ We do not take any responsibility for the leakage

of information during BLUETOOTH communication.

If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.

3GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\030TOC.fm masterpage: Left

010book.book Page 4 Monday, July 13, 2015 4:36 PM

Table of Contents

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5

Getting Started

Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 7

Connecting a USB Device . . . . . . . . . . . . . . . . . . . . . 9

Connecting Other Portable Audio/Video

Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting Rear View Camera . . . . . . . . . . . . . . . . 9

Listening to the Radio

Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . 10

Using Radio Data System (RDS) . . . . . . . . . . . . . . . 11

Playback

Playing a Disc (XAV-W650BT). . . . . . . . . . . . . . . . . 11

Playing a USB Device . . . . . . . . . . . . . . . . . . . . . . . 12

Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . . 13

Searching and Playing Tracks. . . . . . . . . . . . . . . . . 13

Other Settings During Playback. . . . . . . . . . . . . . . 14

Listening to Pandora®

Setting Up Pandora® . . . . . . . . . . . . . . . . . . . . . . . . 14

Streaming Pandora® . . . . . . . . . . . . . . . . . . . . . . . . 14

Available Operations in Pandora® . . . . . . . . . . . . . 15

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Maintenance (XAV-W650BT) . . . . . . . . . . . . . . . . . 24

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Language Code List (XAV-W650BT) . . . . . . . . . . . 32

Connection/Installation

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Parts List for Installation . . . . . . . . . . . . . . . . . . . . 33

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Handsfree Calling (via BLUETOOTH only)

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Available Operations During a Call . . . . . . . . . . . . 16

Useful Functions

SongPal with Android Phone . . . . . . . . . . . . . . . . . 17

Using Siri Eyes Free . . . . . . . . . . . . . . . . . . . . . . . . . 18

Settings

Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . 19

General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Screen Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Visual Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 5 Monday, July 13, 2015 4:36 PM

Guide to Parts and Controls

Main unit

ȩ SOURCE

Change the source. Each time it is pressed, it displays a selectable source in a popup on the current display.

VOICE

Press and hold to activate the voice command function. To assign the DSPL function to this button, select [DSPL] in [SOURCE Key Func.] (page 20).

Volume control dial

Rotate to adjust the volume.

N-Mark

Makes a BLUETOOTH connection when touched with an Android™ phone.

Ȫ HOME

Turn o n the p ower. Open the HOME menu. Press to pause playback when Disc (XAVW650BT), iPod/USB, BT Audio or Pandora source is selected. To resume playback, touch . Press and hold for more than 2 seconds to turn off the unit. When the unit is turned off, remote commander operation is not available (XAVW650BT).

ATT (attenuate)

Press and hold for a second, but less than 2 seconds, then rotate the volume control dial to attenuate the sound.

ȫ Receptor for the remote commander Ȭ Disc slot (XAV-W650BT) ȭì (disc eject) (XAV-W650BT) Ȯ USB port ȯ AUX input jack Ȱ Reset button ȱ Display/touch panel

5GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 6 Monday, July 13, 2015 4:36 PM

RM-X170 remote commander (XAV-W650BT)

The remote commander can be used to operate the audio controls. For menu operations, use the touch panel.

ȼ ZAP (ZAPPIN™) (page 10) ȽR/a/{/C

Select a setup item, etc.

ENTER

Enter the selected item.

Ⱦ MODE

Select the radio band.

ȿ VOL (volume) +/–

Remove the insulation film before use.

Screen displays

Playback screen:

Ȳ OFF

Turn t he sou rce o ff. Press and hold for 2 seconds to turn off the power and display.

ȳ MONITOR OFF

Turn off the monitor and button illumination. To turn back on, press again.

ȴ POSITION

This button is not supported.

ȵá (return)

Return to the previous display. Return to the menu on a Video CD (VCD) (XAVW650BT).

ȶ EQ (equalizer)

Select an equalizer curve.

ȷ Number buttons (0 – 9) ȸ CLEAR ȹā (play/pause) ȺÃ/Ñ (previous/next)

ù/ß (fast-reverse/fast-forward)

Ȼ DVD playback setting buttons (XAV-W650BT)

6GB

Home screen:

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 7 Monday, July 13, 2015 4:36 PM

Ǵ Status indication

Lights up when the sound is attenuated.

Lights up when the “SongPal” connection is established between this unit and your Android phone.

Lights up when the BLUETOOTH signal is on. Flashes when the connection is in progress.

Lights up when the audio device is playable by enabling the A2DP (Advanced Audio Distribution Profile).

Lights up when handsfree calling is available by enabling HFP (Handsfree Profile).

Indicates the signal strength status of the connected cellular phone.

Indicates the remaining battery status of the connected cellular phone.

ǵ (Mega Bass)

Touch to select the Mega Bass setting; [1], [2], [off].

(sound setting menu)

Access the sound setting menu directly (page 20).

(option)

Open the option menu. The available items differ depending on the source.

Ƕ Clock (page 7)

When the AUX or Rear Camera source is selected, the clock is not displayed.

Ƿ Application specific area

Display playback controls/indications or show the unit’s status. Displayed items differ depending on the source.

Ǹ (return to the playback screen)

Switch from the HOME screen to the playback screen.

ǹ /

Move to the next/previous page (This does not necessarily appear on the screen).

Ǻ Sources and Settings select keys

Change the source or make various settings.

Getting Started

Resetting the Unit

You must reset the unit before operating the unit for the first time, after replacing the car battery, or changing connections.

Note

Pressing the reset button will erase the clock setting and some stored contents.

Setting the Clock

1 Press HOME, then touch [Settings]. 2 Touch , then touch [Clock Adjust].

The setting display appears.

3 Touch Ă/è to set the hour and minute. 4 After setting the hour and minute, touch

[Set].

The setting is complete and the clock starts.

Preparing a BLUETOOTH Device

You can enjoy music or perform handsfree calling depending on the BLUETOOTH compatible device such as smartphones, cellular phones, and audio devices (hereafter “BLUETOOTH device” if not otherwise specified). For details on connecting, refer to the operating instructions supplied with the device. Before connecting the device, turn down the volume of this unit; otherwise, a loud sound may result.

7GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 8 Monday, July 13, 2015 4:36 PM

Connecting with a smartphone by One touch (NFC)

By touching the N-Mark on the unit with an NFC* compatible smartphone, the unit is paired and connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower installed, downloading of the app “NFC Easy Connect” available at Google Play™ is required. The app may not be downloadable in some countries/ regions.

1 Activate the NFC function on the

smartphone.

For details, refer to the operating instructions supplied with the smartphone.

2 Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that lights up on the status bar of the unit.

To disconnect by One touch

Touch the N-Mark part of the unit with the N-Mark part of the smartphone again.

Notes

ˎ When making the connection, handle the

smartphone carefully to prevent scratches.

ˎ One tou ch connection is not possible when the unit is

already connected to another NFC compatible device. In this case, disconnect the other device, and make a connection with the smartphone again.

Pairing and connecting with a BLUETOOTH device

When connecting a BLUETOOTH device for the first time, mutual registration (called “pairing”) is required. Pairing enables this unit and other devices to recognize each other.

1 Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

2 Press HOME, then touch [Settings]. 3 Touch . 4 Touch [Bluetooth Connection], then set

the signal to [ON].

The BLUETOOTH signal is turned on and lights up on the status bar of the unit.

5 Touch [Pairing].

flashes while the unit is in pairing standby

mode.

6 Perform pairing on the BLUETOOTH

device so it detects this unit.

7 Select [XAV-xxxx] (your model name)

shown in the display of the BLUETOOTH device.

If your model name does not appear, repeat from step 5.

8 If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called “passcode,” “PIN code,”

“PIN number,” “password,” etc., depending on the BLUETOOTH device.

8GB

Input passkey

[0000]

When pairing is made, stays lit.

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 9 Monday, July 13, 2015 4:36 PM

9 Select this unit on the BLUETOOTH device

to establish the BLUETOOTH connection.

or lights up when the connection is made.

Note

While connecting to a BLUETOOTH device, this unit cannot be detected by another device. To enable detection, enter the pairing mode and search for this unit from another device.

To start playback

For details, see “Playing a BLUETOOTH Device” (page 13).

To canc el pairing

Perform step 5 to cancel the pairing mode after this unit and the BLUETOOTH devices are paired.

Connecting a USB Device

1 Turn down the volume on the unit. 2 Connect the USB device to the unit.

To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied).

Connecting Other Portable Audio/Video Devices

1 Turn off the portable audio/video device. 2 Turn down the volume on the unit.

Connecting with a paired BLUETOOTH device

To use a paired device, connection with this unit is required. Some paired devices will connect automatically.

1 Press HOME, then touch [Settings]. 2 Touch [Bluetooth Connection], then

touch [ON].

Make sure that lights up on the status bar of the unit.

3 Connect the portable audio/video device

to the AUX input jack on the unit with a connecting cord (not supplied).

4 Press HOME, then touch [AUX].

To match the volume level of the connected device to other sources

Start playback of the portable audio/video device at a moderate volume and set your usual listening volume on the unit: Touch , then set [Input Level] between –10 and +15.

To set to the device type manually

Touch , then set [AUX Input] to [Audio], [Video], or [Auto].

3 Activate the BLUETOOTH function on the

BLUETOOTH device.

4 Operate the BLUETOOTH device to

connect to this unit.

or lights up on the status bar.

To connect the last-connected device from this unit

When the ignition is turned to on with the BLUETOOTH signal activated, this unit searches for the last-connected BLUETOOTH device, and connection is made automatically. If it does not work, touch [Reconnect] to search for the last-paired device again. If the problem is not solved, follow the pairing procedure.

Note

While streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead.

To install the microphone

For details, see “Installing the microphone” (page 35).

Connecting Rear View Camera

By connecting the optional rear view camera to the CAMERA IN terminal, you can display the picture from the rear view camera. For details, see “Connection/Installation” (page 33).

9GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 10 Monday, July 13, 2015 4:36 PM

Storing automatically (BTM)

Listening to the Radio

To listen to the radio, press HOME then touch [Tuner].

Reception controls/indications

1 Select the desired band (FM1, FM2, FM3,

AM1, or AM2).

2 Touch . 3 Touch [BTM], then [Search].

The unit stores stations in order of frequency on the preset numbers (1 to 6).

Tuning

1 Touch the current band.

The band list appears.

2 Touch the desired band (FM1, FM2, FM3,

AM1, or AM2).

3 Perform tuning.

To tune automatically

Touch –SEEK/SEEK+. Scanning stops when the unit receives a station.

ɸ Current band

Opens the band list.

ɹ Current frequency, program service name*,

RDS indication*

* During RDS reception.

ɺ PTY (program types) (FM only)

Opens the PTY list (page 11).

ɻ ZAP (ZAPPIN)

Helps to find a desired station by listening to preset stations for a few seconds.

ɼ (option)

Opens the option menu.

ɽ –SEEK/SEEK+

Tunes in automatically.

ɾî/Ô

Tunes in manually. Touch and hold to continuously skip frequencies.

ɿ Preset numbers (1 to 6)

Selects a preset station. Touch and hold to store the current frequency in that preset.

To tune manually

Touch and hold î/Ô to locate the approximate frequency, then touch î/Ô repeatedly to fine adjust to the desired frequency.

Storing manually

1 While receiving the station that you want

to store, press and hold the desired preset number (1 to 6).

Receiving stored stations

1 Select the band, then touch the desired

preset number (1 to 6).

Searching for the desired station from preset stations (Tuner Preset ZAPPIN)

Tuner Preset ZAPPIN helps you to find a desired station by listening to preset stations for a few seconds.

1 During radio reception, touch [ZAP].

Tuner Preset ZAPPIN starts, and subsequent stations are received in sequence.

2 Touch [ZAP] again when the desired

station is received.

10GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

ɹɺ

010book.book Page 11 Monday, July 13, 2015 4:36 PM

Using Radio Data System (RDS)

Selecting program types (PTY)

1 During FM reception, touch [PTY].

To scroll the list, touch Ă/è.

2 Touch the desired program type.

The unit searches for a station broadcasting the selected program type.

To close the PTY list

Touch .

Typ e of programs

News (News), Information (Information), Sports

(Sports), Ta lk (Talk), Rock (Rock), Classic Rock (Classic Rock), Adult Hits (Adult Hits), Soft Rock (Soft Rock), Top 4 0 (Top 40), Country (Country),

Oldies (Oldies), Soft (Soft), Nostalgia (Nostalgia), Jazz (Jazz), Classical (Classical), Rhythm and Blues

(Rhythm and Blues), Soft R & B (Soft Rhythm and Blues), Foreign Language (Foreign Language), Religious Music (Religious Music), Religious Talk (Religious Talk), Personality (Personality), Public (Public), College (College), Weather (Weather)

Setting clock time (CT)

The CT data from the RDS transmission sets the clock.

1 Set [Clock Time] to [ON] in [General

Settings] (page 19).

Playback

Playing a Disc (XAV-W650BT)

Depending on the disc type, some operations may be different or restricted.

1 Insert the disc (label side up).

Playback starts automatically.

If a DVD menu appears

Touch the desired item in the DVD menu. You can also use the menu control panel, which can be displayed by touching the screen anywhere except the DVD menu items. Touch V/j//p to move the cursor, then touch [ENTER] to confirm. If the menu control panel does not appear by touching the display, use the remote commander.

Example of playback indications (DVD)

ɸ Current source icon, format ɹ Playback status, elapsed playback time ɺ Chapter/title number, audio format

Touch the display if the indications are not displayed. For audio discs, some indications are always displayed during playback.

11GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 12 Monday, July 13, 2015 4:36 PM

Using PBC (playback control) functions

The PBC menu interactively assists with operations while a PBC-compatible VCD is played.

1 Start playing a PBC-compatible VCD.

The PBC menu appears.

2 Touch .

The menu control panel appears.

3 Touch the number keys to select the

desired item, then touch [ENTER].

4 Follow the instructions in the menu for

interactive operations.

To return to the previous display

Tou ch á.

To deactivate PBC functions

Set [Video CD PBC] to [OFF] (page 20).

Notes

ˎ During PBC playback, the track number, playback

item, etc., do not appear on the playback display.

ˎ Resume playback is unavailable during playback with

PBC.

Configuring audio settings

Changing the audio language/format

When playing a DVD video, the audio language can be changed if the disc is recorded with multilingual tracks. You can also change the audio format when playing a disc recorded in multiple audio formats (e.g., Dolby Digital). During playback, touch the screen, then . Touch repeatedly until the desired audio language/format appears.

Example: Dolby Digital 5.1 ch

ɸ ɹ

ɸ Audio language ɹ Audio format/channel numbers

If the same language is displayed two or more times, the disc is recorded in multiple audio formats.

[Stereo]: Standard stereo sound (default) [Left]: Left channel sound (monaural) [Right]: Right channel sound (monaural)

Playing a USB Device

In these Operating Instructions, “iPod” is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations.

For details on the compatibility of your iPod, see “About iPod” (page 24) or visit the support site on the back cover.

MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices (such as a USB flash drive, digital media player, Android phone) compliant with the USB standard can be used. Depending on the digital media player or Android phone, setting the USB connection mode to MTP is required.

Notes

ˎ For details on the compatibility of your USB device,

visit the support site on the back cover.

ˎ Playback of the following files is not supported.

MP3/WMA/AAC/FLAC:

ˋ copyright-protected files ˋ DRM (Digital Rights Management) files ˋ Multi-channel audio files

MP3/WMA/AAC: ˋ lossless compression files WAV: ˋ Multi-channel audio files

1 Connect the USB device to the USB port.

Playback starts. If a device is already connected, press HOME then touch [iPod/USB] to start playback.

2 Adjust the volume on this unit.

To stop playback

Press SOURCE repeatedly until [OFF] appears.

To remove the device

Stop playback, then remove the device.

Caution for iPhone

When you connect an iPhone via USB, the phone call volume is controlled by the iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as a sudden loud sound may result when the call ends.

Changing the audio channel

When playing a VCD, you can listen to both left and right channels, right channel only or left channel only, via both right and left speakers. During playback, touch repeatedly until the desired audio channel appears. The options are indicated below.

12GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 13 Monday, July 13, 2015 4:36 PM

Playing a BLUETOOTH Device

You can play contents on a connected device that supports BLUETOOTH A2DP (Advanced Audio Distribution Profile).

1 Make a BLUETOOTH connection with the

audio device (page 9).

2 Press HOME, then touch [BT Audio]. 3 Operate the audio device to start

playback.

4 Adjust the volume on this unit.

Notes

ˎ Depending on the audio device, information such as

title, track number/time, and playback status may not be displayed on this unit.

ˎ Even if the source is changed on this unit, playback of

the audio device does not stop.

To match the volume level of the BLUETOOTH device to other sources

You can reduce the volume level differences between this unit and the BLUETOOTH device: During playback, touch , then set [Input Level] between –10 and +15.

Searching and Playing Tracks

Repeat play and shuffle play

1 During playback, touch (repeat) or

(shuffle) repeatedly until the desired play mode appears.

Playback in the selected play mode may take time to start.

Available play modes differ depending on the selected sound source.

Note

Repeat play and shuffle play are not available for version 2.0 VCD with the PBC function.

Direct search play (XAV-W650BT)

1 During disc or USB playback, press the

number buttons on the remote commander to enter an item (e.g., track) number, then press ENTER on the remote commander.

Playback starts from the beginning of the selected point.

Note

During VCD playback, this function is available only when playing a VCD without PBC functions.

Searching for a file from the list screen

1 During disc (XAV-W650BT) or USB

playback, touch .

The list screen from the currently played item appears.

Furthermore, touch (audio), (video), or

(photo) to list up by file type.

2 Touch the desired item.

Playback starts.

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

13GB

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 14 Monday, July 13, 2015 4:36 PM

Other Settings During Playback

Further settings are available in each source by touching . The available items differ depending on the source.

Picture EQ

Adjusts the picture quality to suit the interior brightness of the car: [Dynamic], [Standard], [Theater], [Sepia]. (Available only when the parking brake is applied, and iPod/USB, Disc (XAV-W650BT), or AUX source is selected).

Aspect

Selects an aspect ratio for the screen of the unit. (Available only when the parking brake is applied, and iPod/USB, Disc (XAV-W650BT), or AUX source is selected).

Normal

Displays a picture in the 4:3 aspect ratio (regular picture).

Wide

Displays a picture in the 4:3 aspect ratio enlarged to the left and right edges of the screen with overflowing parts of the top and bottom cut off to fill the screen.

Full

Displays a picture in the 16:9 aspect ratio.

Zoom

Displays a picture in the 4:3 aspect ratio enlarged to the left and right edges of the screen.

DVD Audio Level (XAV-W650BT)

Adjust the audio output level between –10 and +10 for a DVD recorded in Dolby Digital format to balance the volume level between discs. (Available only when Disc source is selected.)

Listening to Pandora®

Pandora® is available to stream music through your iPhone and Android phone. You can control Pandora® on a USB-connected iPhone or BLUETOOTH-connected Android phone from this unit. Pandora® is only available in certain countries. Please visit http://www.pandora.com/legal for more information.

Setting Up Pandora®

1 Check the compatibility of your mobile

device by visiting the support site on the back cover.

2 Download the latest version of the

Pandora® application from your smartphone’s app store. A list of compatible devices can be found at: www.pandora.com/everywhere/mobile

Streaming Pandora®

1 Launch the Pandora® application on your

mobile device.

2 Connect the mobile device with this unit.

In the case of an iPhone, connect via USB (page 9). In the case of Android phone, connect via the BLUETOOTH function (page 7).

3 Press HOME, then touch [Pandora].

If the device number appears

Make sure that the same numbers are displayed (e.g., 123456) in this unit and mobile device, then touch [OK] on this unit and confirm on the mobile device.

To change the playback device

Touch , then select [USB] (iPhone) or [BT] (Android phone).

14GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 15 Monday, July 13, 2015 4:36 PM

Available Operations in Pandora®

“Thumbs” feedback

“Thumbs Up” or “Thumbs Down” feedback allows you to personalize stations.

1 During playback, touch (Thumbs up)

or (Thumbs down).

Using the station list

The station list allows you to easily select a desired station.

1 During playback, touch .

The station list appears.

2 Touch the desired station name.

Playback starts.

To change the sorting order

Touch or .

To scroll the list

Touch Ă/è.

Bookmarking

The track currently being played can be bookmarked and stored in your Pandora® account.

1 During playback, touch .

Handsfree Calling (via BLUETOOTH only)

To use a cellular phone, connect it with this unit. For details, see “Preparing a BLUETOOTH Device” (page 7).

Receiving a Call

1 Touch when a call is received.

The phone call starts.

Note

The ringtone and talker’s voice are output only from the front speakers.

To reject/end a call

Tou ch .

Making a Call

1 Press HOME, then touch [Phone]. 2 Touch one of the call icons on the

BLUETOOTH phone display.

ɸ (call history)*

Select a contact from the call history list. The unit stores the last 20 calls.

ɹ (redial)

Make a call automatically to the last contact you made.

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

15GB

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 16 Monday, July 13, 2015 4:36 PM

ɺ (phonebook)*

Select a contact from the name list/number list in the phonebook. To search the desired contact in alphabetical order from the name list, touch .

ɻ (voice command)*

Say a voice tag stored on the cellular phone.

ɼ (phone number input)

Enter the phone number.

ɽ Preset numbers (1 to 6)

Select the stored contact. To store the contact, see “Presetting phone numbers” (page 16).

*1 The cellular phone needs to support PBAP

(Phone Book Access Profile).

*2 Do not use the voice command function on the

cellular phone while it is connected to this unit.

*3 Voice command may not work depending on the

recognition specification of the cellular phone. For details, visit the support site on the back cover.

2*3

3 Touch .

The phone call starts.

Presetting phone numbers

You can store up to 6 contacts in the preset list.

1 In the phone screen, select a phone

number that you want to store in the preset dial from the phonebook, call history, or by inputting the phone number directly.

The confirmation display appears.

2 Touch [Preset], then the desired preset

number (1 to 6).

The contact is stored to the selected preset number.

Available Operations During a Call

To adjust the ringtone volume

Rotate the volume control dial while receiving a call.

To adjust the talker’s voice volume

Rotate the volume control dial during a call.

To adjust the volume for the other party (Mic gain adjustment)

During a handsfree call, touch , then set [MIC Gain] to [Low], [Middle], or [High].

To switch between handsfree mode and handheld mode

During a call, touch to switch the phone call audio between the unit and cellular phone.

Note

Depending on the cellular phone, this operation may not be available.

To answer an incoming call automatically

Touch , then set [Auto Answer] to [ON].

16GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 17 Monday, July 13, 2015 4:36 PM

Selecting the source or application

Useful Functions

SongPal with Android Phone

Downloading the “SongPal” application (version 3.0 or later) is required from Google Play.

Notes

ˎ For your safety, follow your local

traffic laws and regulations, and do not operate the application while driving.

ˎ Connecting an Android phone

while “SongPal” is installed to this unit allows you to receive notifications of your SMS or calendar, etc. through the car speakers and control the unit by voice command.

ˎ What you can control with “SongPal” varies

depending on the connected device.

ˎ To make use of “SongPal” features, see the details on

your Android phone.

ˎ Display images of the “SongPal” application used in

this Operating Instruction may differ with the actual ones.

ˎ Message s of the “SongPal” application that appear on

this unit and your Android phone may differ.

ˎ For further details on “SongPal,” visit the following

URL: http://rd1.sony.net/help/speaker/songpal/

You can select a source or application not only on your Android phone but also on this unit by operating the Android phone.

1 Show the source list of this unit on your Android

phone.

For details, refer to the operating instructions supplied with the Android phone.

2 Touch the desired source.

Announcement of various information by voice guide

When SMS, Twitter/Facebook/Calendar notifications, etc., are received, they are automatically announced through the car speakers.

Establishing the SongPal connection

1 Make the BLUETOOTH connection with

Android phone (page 9).

2 Launch the “SongPal” application. 3 Press HOME, then touch [Settings]. 4 Touch , then set [SongPal] to

[Connect].

Connection to Android phone starts. For details on the operations on an Android phone, see the help section of the application.

If the device number appears

Make sure that the number is displayed (e.g.,

123456), then select “Yes” on the Android phone.

To termi nate con n ecti o n

Set [SongPal] to [Disconnect] in [General Settings].

For details on settings, refer to the help section of the application.

17GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 18 Monday, July 13, 2015 4:36 PM

Activating voice recognition

By registering applications, you can control an application by voice command. For details, refer to the help section of the application.

To activate voice recognition

1 Press and hold VOICE to activate voice

recognition.

2 Say the desired voice command into the

microphone when [Say Source or App] appears on the Android phone.

Notes

ˎ To use this function, VOICE need to be assigned the

voice command function by selecting [Voice] in [SOURCE Key Func.] (page 20).

ˎ Voice recognition may not be available in some cases. ˎ Voice recognition may not work properly depending

on the performance of the connected Android phone.

ˎ Operate under conditions where noise such as engine

sound is minimized during voice recognition.

Replying a message of SMS

You can reply a message by voice recognition.

1 Activate voice recognition, then input “Reply

(Reply).”

The message input display appears on the “SongPal” application.

2 Input a reply message by voice recognition.

The list of message candidates appears on the “SongPal” application.

3 Touch Ă/è to select the desired message, then

touch [Enter].

The message is sent out.

Using Siri Eyes Free

Siri Eyes Free allows you to use an iPhone handsfree by simply speaking into the microphone. This function requires you to connect an iPhone to the unit via BLUETOOTH. Availability is limited to iPhone 4s or later. Make sure that your iPhone is running the latest iOS version. You must complete BLUETOOTH registration and connection configurations for the iPhone with the unit in advance. For details, see “Preparing a BLUETOOTH Device” (page 7).

1 Activate the Siri function on the iPhone.

For details, refer to the operating instructions supplied with the iPhone.

2 Press and hold SOURCE.

The voice command display appears.

3 After the iPhone beeps, speak into the

microphone.

The iPhone beeps again, then Siri starts responding.

To deactivate Siri Eyes Free

Touch [Close].

Notes

ˎ The iPhone may not recognize your voice depending

on usage conditions. (For example, if you are in a moving car.)

ˎ Siri Eyes Free may not function properly, or the

response time may lag in locations where iPhone signals are difficult to receive.

ˎ Depending on the iPhone’s operating condition, Siri

Eyes Free may not function properly, or may quit.

ˎ If you play a track with an iPhone using the

BLUETOOTH audio connection, when the track starts playback via BLUETOOTH, Siri Eyes Free automatically quits and the unit switches to the BLUETOOTH audio source.

ˎ When Siri Eyes Free is activated during audio

playback, the unit may switch to the BLUETOOTH audio source even if you do not specify a track to play.

ˎ When connecting the iPhone to the USB port, Siri Eyes

Free may not function properly, or may quit.

ˎ When connecting the iPhone to the unit via USB, do

not activate Siri with the iPhone. Siri Eyes Free may not function properly, or may quit.

ˎ There is no audio sound while Siri Eyes Free is

activated.

18GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 19 Monday, July 13, 2015 4:36 PM

Output Color System

Settings

Basic Setting Operation

You can set items in the following setup categories:

General Settings

Sound Settings

Screen Settings

Visual Settings

1 Press HOME, then touch [Settings]. 2 Touch one of the setup category icons.

The items that can be set differ depending on the source and settings.

3 Touch Ă/è to select the desired item.

To return to the previous display

Touch .

To switch to the playback screen

Touch .

General Settings

Language

Selects the display language: [English], [Español], [Русский].

Time Format

Changes the time format: [12-hour], [24-hour].

Clock Time

Sets the clock time by the RDS data: [OFF], [ON].

Clock Adjust

Sets the clock time manually. (Available only when [Clock Time] is set to [OFF].)

Beep

Activates the operation sound: [OFF], [ON].

Dimmer

Dims the display: [OFF], [ON], [Auto]. ([Auto] is available only when the illumination control lead is connected, and works when the head light is turned on.)

Dimmer Level

Adjusts the brightness level when the dimmer is activated: –5 to +5.

Touch Panel Adjust

Adjusts the touch panel calibration if the touching position does not correspond with the proper item.

Changes the color system according to the connected monitor (SECAM is not supported): [NTSC], [PAL]. (Available only when no source is selected.)

Camera Input

Selects the image from the rear view camera: [Normal], [Reverse] (mirror image), [OFF].

Rear View Camera (XAV-W650BT)

Adjusts the length and/or position of the marker lines on the picture from the rear view camera by touching [Line Edit].

Steering Control

Selects the input mode for the connected remote control. To prevent a malfunction, be sure to match the input mode with the connected remote control before use.

Custom

Input mode for the steering wheel remote control (Automatically selected when [User Defined] is complete.).

Preset

Input mode for the wired remote control excluding the steering wheel remote control.

User Defined

The steering button panel appears. ɞ Press and hold the button you want to assign

to the steering wheel. The button on the panel lights up (standby).

ɟ Press and hold the button on the steering

wheel you want to assign the function to. The button on the panel changes to blue (registration complete).

ɠ To register other functions, repeat steps ɞ

and ɟ.

(Available only when [Steering Control] is set to [Custom].)

Notes

ˎ While making settings, only button operation on

the unit is available. For safety, park your car before making this setting.

ˎ If an error occurs while registering, all the

registered information is cleared. Restart registration from the beginning.

ˎ This function may not be available on some

vehicles. For details on the compatibility of your vehicle, visit the support site on the back cover.

Bluetooth Connection

Activates the BLUETOOTH signal: [OFF], [ON], [Pairing] (enters into pairing standby mode).

Bluetooth Device Info

Displays the information of the device connected to the unit by touching [Open]. (Available only when [Bluetooth Connection] is set to [ON])

19GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 20 Monday, July 13, 2015 4:36 PM

Bluetooth Reset

Initializes all BLUETOOTH-related settings such as pairing information, call history, preset dial, history of connected BLUETOOTH devices, etc.

SongPal

Establishes or terminates the “SongPal” function (connection): [Connect], [Disconnect].

SOURCE Key Func.

Assigns the voice command function or the display menu to the SOURCE button: [Voice], [DSPL].

Sound Settings

Mega Bass

Reinforces bass sound in synchronization with the volume level: [1], [2], [OFF].

EQ5/Subwoofer

Selects an equalizer curve and adjusts the subwoofer level.

EQ5

Selects the equalizer curve: [Country], [Soul], [Electronica], [R&B], [Pop], [Rock], [Hip-Hop], [Jazz], [Dance], [Custom], [OFF]. [Custom] adjusts the equalizer curve: –8 to +8.

Subwoofer

Adjusts the volume level of the subwoofer: [OFF], –10 to +10.

Balance/Fader

Adjusts the balance/fader level.

Balance:

Adjusts the sound balance between the left and right speakers: L15 to R15.

Fade r:

Adjusts the sound balance between the front and rear speakers: Front 15 to Rear 15.

Crossover

Adjusts the cut-off frequency and subwoofer phase.

High Pass Filter

Selects the cut-off frequency of the front/rear speakers: [63Hz], [100Hz], [120Hz], [150Hz], [180Hz], [OFF].

Low Pass Filter

Selects the cut-off frequency of the subwoofer: [OFF], [55Hz], [85Hz], [120Hz], [160Hz].

Subwoofer Phase

Selects the subwoofer phase: [Normal], [Reverse].

Screen Settings

Demo

Activates the demonstration: [OFF], [ON].

Wallpaper

Changes the basis color of the background by touching the desired color.

Visual Settings

Available only when no source is selected.

DVD Menu Language (XAV-W650BT)

Selects the default language for the disc’s menu: [English], [Chinese], [German], [French], [Italian], [Spanish], [Portuguese], [Dutch], [Danish], [Swedish], [Finnish], [Norwegian], [Russian], [Other].

DVD Audio Language (XAV-W650BT)

Selects the default language for the soundtrack: [English], [Chinese], [German], [French], [Italian], [Spanish], [Portuguese], [Dutch], [Danish], [Swedish], [Finnish], [Norwegian], [Russian], [Other].

DVD Subtitle Language (XAV-W650BT)

Selects the default subtitle language for DVD: [English], [Chinese], [German], [French], [Italian], [Spanish], [Portuguese], [Dutch], [Danish], [Swedish], [Finnish], [Norwegian], [Russian], [Other].

Monitor Type

Selects an aspect ratio suitable for the unit and connected monitor. (Available only while the source is off and the clock is displayed.)

16:9

Displays a wide picture. Suitable when connecting to a wide-screen monitor or a monitor with a wide mode function.

Letterbox

Displays a wide picture with bands on the upper and lower positions of the screen. Suitable when connecting to a 4:3 screen monitor.

Pan Scan

Displays a wide picture on the entire screen and automatically cuts off the portions that do not fit.

Video CD PBC (XAV-W650BT)

Activates PBC functions when playing back a VCD: [OFF], [ON].

20GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 21 Monday, July 13, 2015 4:36 PM

Notes on LCD panel

ˎ Do not get the LCD panel wet or expose it to

Additional Information

liquids. This may cause a malfunction.

Precautions

ˎ Cool off the unit beforehand if your car has been

parked in direct sunlight.

ˎ Power antenna (aerial) extends automatically.

Moisture condensation (XAV-W650BT)

Should moisture condensation occur inside the unit, remove the disc, and wait for about an hour for it to dry out; otherwise the unit will not operate properly.

To maintain high sound quality

Do not splash liquid onto the unit or discs (XAVW650BT).

Notes on safety

ˎ Comply with your local traffic rules, laws, and

regulations.

ˎ While driving

ˋ Do not watch or operate the unit, as it may lead

to distraction and cause an accident. Park your car in a safe place to watch or operate the unit.

ˋ Do not use the setup feature or any other

function which could divert your attention from the road.

ˋ When backing up your car, be sure to look back

and watch the surroundings carefully for your safety, even if the rear view camera is connected. Do not depend on the rear view camera exclusively.

ˎ While operating

ˋ Do not insert your hands, fingers, or foreign

objects into the unit, as it may cause injury or damage to the unit.

ˋ Keep small articles out of the reach of children. ˋ Be sure to fasten seatbelts to avoid injury in the

event of sudden movement of the car.

Preventing an accident

Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, the following caution is displayed and you cannot watch the video.

[Video blocked for your safety.]

The monitor connected to the REAR VIDEO OUT is active while the car is in motion. You cannot watch the video, but you can hear audio.

Do not operate the unit or watch the monitor while driving.

ˎ Do not press down hard on the LCD panel as

doing so can distort the picture or cause a malfunction (i.e., the picture may become unclear, or the LCD panel may be damaged).

ˎ Do not touch the panel with objects other than

with your finger, as it may damage or break the LCD panel.

ˎ Clean the LCD panel with a dry soft cloth. Do not

use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray.

ˎ Do not use this unit outside the temperature

range 0 – 40 ºC (32 – 104 ºF).

ˎ If your car was parked in a cold or hot place, the

picture may not be clear. However, the monitor is not damaged, and the picture will become clear after the temperature in your car becomes normal.

ˎ Some stationary blue, red, or green dots may

appear on the monitor. These are called “bright spots,” and can happen with any LCD. The LCD panel is precision-manufactured with more than

99.99% of its segments functional. However, it is possible that a small percentage (typically 0.01%) of the segments may not light up properly. This will not, however, interfere with your viewing.

Playable discs and file types

Discs (XAV-W650BT)

DVD* DVD VIDEO

VCD Video CD (Ver. 1.0/1.1/2.0)

CD Audio CD

* “DVD” may be used in these Operating Instructions as

a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/DVD+RWs.

DVD-R/DVD-R DL/DVD-RW (Video mode) DVD+R/DVD+R DL/DVD+RW

CD-ROM/CD-R/CD-RW

21GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 22 Monday, July 13, 2015 4:36 PM

File types

For details on compression formats, see page 22.

Audio MP3 file, WMA file, AAC file,

Video Xvid file, MPEG-4 file

Photo jpeg file (.jpg)

FLAC file, WAV file

Notes on discs (XAV-W650BT)

ˎ Do not expose discs to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car parked in direct sunlight.

ˎ Before playing, wipe the discs

with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, or commercially available cleaners.

ˎ This unit is designed to play

discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit.

ˎ Discs that this unit CANNOT play

ˋ Discs with labels, stickers, or sticky tape or

paper attached. Doing so may cause a malfunction, or may ruin the disc.

ˋ Discs with non-standard shapes (e.g., heart,

square, star). Attempting to do so may damage the unit.

ˋ 8 cm (3

Note on playback operations of DVDs and VCDs

Some playback operations of DVDs and VCDs may be intentionally set by software producers. Since this unit plays DVDs and VCDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VCDs.

Notes on DATA CDs, DATA DVDs, and USB playback

ˎ Some DATA CDs/DATA DVDs (depending on the

equipment used for its recording or the disc condition) may not play on this unit.

ˎ Finalization is required for some discs (page 22). ˎ The unit is compatible with the following

standards. For DATA CDs ˋ ISO 9660 level 1/level 2 format, Joliet/Romeo in

For DATA DVDs ˋ UDF Bridge format (combined UDF and ISO

/4 in) discs.

the expansion format

9660)

ˎ The maximum number of:

ˋ folders (albums): 256 (including root and empty

folders).

ˋ files (tracks/videos/photos) and folders

contained in a disc: 2,000 (if folder/file names contain many characters, this number may become less than 2,000).

ˋ displayable characters for a folder/file name:

32.

ˎ Compatible codecs are MP3 (.mp3), WMA (.wma),

JPEG (.jpg), Xvid (.avi), and MPEG-4 (.mp4).

ˎ DRM (Digital Rights Management) files may not be

played.

Notes on finalizing discs

The following discs are required to be finalized to play on this unit.

ˋ DVD-R/DVD-R DL (in video mode) ˋ DVD-RW in video mode ˋ DVD+R/DVD+R DL ˋ CD-R ˋ CD-RW

DVD+RW can be played without finalization. The disc is automatically finalized.

For details, refer to the manual supplied with the disc.

Playback order of audio/video files

Folder (album)

Audio/video (track/video)

About WMA files

WMA*1 files meeting the following requirements can be played. Playback is not guaranteed for all WMA files meeting the requirements.

Codec

ˎ Media File format: ASF file format ˎ File extension: .wma ˎ Bit rate: 48 to 192 kbps (Supports variable bit rate

(VBR))*

ˎ Sampling frequency*3: 44.1 kHz

22GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 23 Monday, July 13, 2015 4:36 PM

About MP3 files

MP3 files meeting the following requirements can be played. Playback is not be guaranteed for all MP3 files meeting the requirements.

Codec

ˎ Media File format: MP3 (MPEG-1 Layer3) file

format

ˎ File extension: .mp3 ˎ Bit rate: 48 to 192 kbps (Supports variable bit rate

(VBR))*

ˎ Sampling frequency*3: 32, 44.1, 48 kHz

About AAC files

AAC files meeting the following requirements can be played. Playback is not be guaranteed for all AAC files meeting the requirements.

Codec

ˎ Media File format: AAC-LC supporting ADTS/

RAW/ADIF

ˎ File extension: .m4a ˎ Bit rate: 40 to 320 kbps (Supports variable bit rate

(VBR)/constant bit rate (CBR))*

ˎ Sampling frequency*3: 8 to 48 kHz ˎ Bit per sample (Quantization bit): 16 bits ˎ Channel: Mono, Stereo

About FLAC files

FLAC files meeting the following requirements can be played. Playback is not be guaranteed for all FLAC files meeting the requirements.

Codec

ˎ File extension: .flac ˎ Sampling frequency* ˎ Bit per sample (Quantization bit)*

3*4

: 8 to 96 kHz

: 8, 12, 16, 20,

24 bits

ˎ Channel: Mono, Stereo (excluding 5.1 ch file)

About WAV files

WAV files meeting the following requirements can be played. Playback is not guaranteed for all WAV files meeting the requirements.

Codec

ˎ File extension: .wav ˎ Bit rate: 16 kbps to 1.536 Mbps (Supports variable

bit rate (VBR)/constant bit rate (CBR))*

ˎ Sampling frequency*3: 8 to 48 kHz ˎ Bit per sample (Quantization bit): 16, 24 bits ˎ Channel: Mono, Stereo

About Xvid files

Xvid files meeting the following requirements can be played. Playback is not be guaranteed for all Xvid files meeting the requirements.

Codec

ˎ Media File format: Xvid file format ˎ File extension: .avi ˎ Video codec: MPEG-4 Advanced Simple Profile ˎ Audio codec: MP3 (MPEG-1 Layer3) ˎ Bit rate: Max. 8 Mbps

ˎ Frame rate: Max. 30 fps (30p/60i) ˎ Resolution: Max. 720 × 576*

About MPEG-4 files

MPEG-4 files meeting the following requirements can be played. Playback is not be guaranteed for all MPEG-4 files meeting the requirements.

Codec

ˎ Media File format: MP4 file format ˎ File extension: .mp4 ˎ Video codec: MPEG-4 Simple Profile ˎ Audio codec: AAC ˎ Bit rate: Max. 4 Mbps ˎ Frame rate: Max. 30 fps (30p/60i) ˎ Resolution: Max. 720 × 576*

About JPEG files

JPEG*6 files meeting the following requirements can be played. Playback is not be guaranteed for all JPEG files meeting the requirements.

Codec

ˎ Media File format: Compatible with DCF 2.0/Exif

2.21 file format

ˎ File extension: .jpg ˎ Profile: Baseline Profile ˎ Number of pixels: Max. 6,048 × 4,032 pixels

(24,000,000 pixels)

*1 Copyright protected WMA files cannot be played

back.

*2 Non-standard bit rates or non-guaranteed bit rates

are included depending on the sampling frequency.

*3 Sampling frequency may not correspond to all

encoders.

*4 High-resolution audio contents will be down-

converted during playback.

*5 These numbers indicate the maximum resolution of

playable video and do not indicate the player’s display resolution. The display resolution is 800 ×

480.

*6 Some photo files cannot be played back depending

on their file formats.

23GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

+ side up

010book.book Page 24 Monday, July 13, 2015 4:36 PM

About iPod

ˎ You can connect to the following iPod models.

Update your iPod devices to the latest software before use.

Compatible iPhone/iPod models

Compatible Model Bluetooth® USB iPhone 6 Plus íí iPhone 6 íí iPhone 5s íí iPhone 5c íí iPhone 5 íí iPhone 4s íí iPhone 4 íí iPhone 3GS íí iPod touch

(5th generation) iPod touch

(4th generation) iPod touch

(3rd generation) iPod classic í iPod nano

(7th generation) iPod nano

(6th generation) iPod nano

(5th generation)

ˎ “Made for iPod,” and “Made for iPhone,” mean

that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

If you have any questions or problems concerning your unit that are not covered in this Operating Instructions, consult your nearest Sony dealer.

íí

Maintenance (XAV-W650BT)

Replacing the lithium battery of the remote commander

Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter depending on the conditions of use.) When the battery becomes weak, the range of the remote commander becomes shorter.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type.

Notes on the lithium battery

ˎ Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately consult a doctor.

ˎ Wipe the battery with a dry cloth to ensure good

contact.

ˎ Be sure to observe the correct polarity when installing

the battery.

ˎ Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

24GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 25 Monday, July 13, 2015 4:36 PM

Specifications

FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

AUDIO POWER SPECIFICATIONS

CEA2006 Standard Power Output: 17 Watts RMS × 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA (reference: 1 Watt into 4 Ohms)

Monitor section

Display type: Wide LCD color monitor Dimensions: 6.2 in System: TFT active matrix Number of pixels:

1,152,000 pixels (800 × 3 (RGB) × 480)

Color system:

PAL/NTSC/SECAM/PAL-M automatic select

Tuner sect ion

Tuning range: 87.5 – 107.9 MHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency: 150 kHz Usable sensitivity: 10 dBf Selectivity: 70 dB at 400 kHz Signal-to-noise ratio: 70 dB (mono) Separation at 1 kHz: 30 dB Frequency response: 20 – 15,000 Hz

Tuning range: 530 – 1,710 kHz Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency:

9,267.5 kHz or 9,257.5 kHz/5 kHz Sensitivity: 44 μV

DVD/CD Player section (XAV-W650BT )

Signal-to-noise ratio: 80 dB Frequency response: 20 – 20,000 Hz Wow and flutter: Below measurable limit Harmonic distortion: 0.05% Region code: Labeled on the bottom of the unit

USB Player section

Interface: USB (Full-speed) Maximum current: 1 A

Wireless Communication

Communication System:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2 (Max. +4 dBm)

Maximum communication range:

Line of sight approx. 10 m (33 ft)*

Frequency band:

2.4 GHz band (2.4000 – 2.4835 GHz) Modulation method: FHSS Compatible BLUETOOTH Profiles*

A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.4 HFP (Handsfree Profile) 1.6 PBAP (Phone Book Access Profile) OPP (Object Push Profile) SPP (Serial Port Profile)

Corresponding codec: SBC (.sbc)

*1 The actual range will vary depending on factors such

as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial)’s performance, operating system, software application, etc.

*2 BLUETOOTH standard profiles indicate the purpose

of BLUETOOTH communication between devices.

Power amplifier section

Outputs: Speaker outputs Speaker impedance: 4 – 8 ohms Maximum power output: 55 W × 4 (at 4 ohms)

General

Outputs:

Video output terminal (rear) Audio output terminals (front, rear, sub) Power antenna (aerial)/Power amplifier control terminal (REM OUT)

Inputs:

Illumination control terminal Steering control input terminal Antenna (aerial) input terminal Microphone input terminal Parking brake control terminal Reverse input terminal Camera input terminal AUX audio input terminal (Front) AUX Audio/Video input terminal (Rear) USB port External input terminal

Power requirements: 12 V DC car battery

(negative ground (earth)) Rated current consumption: 10 A Dimensions: Approx. 178 mm × 101.5 mm × 176 mm

/8 in × 4 in × 7 in) (w/h/d)

Mounting dimensions:

Approx. 170 mm × 100 mm × 162 mm

/4 in × 4 in × 6 1/2 in) (w/h/d)

25GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 26 Monday, July 13, 2015 4:36 PM

Mass:

XAV-W650BT: 1.7 kg (3 lb 12 oz) XAV-V630BT: 1.2 kg (2 lb 10

Package contents:

Main unit (1) Parts for installation and connections (1 set) Remote Commander (1): RM-X170 (XAV-W650BT) Microphone (1)

Optional accessories/equipment:

Mounting bracket: GMD-D100 Cable for steering wheel remote input: RC-SR1

Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.

Design and specifications are subject to change without notice.

/8 oz)

Region code

The region system is used to protect software copyrights. The region code is located on the bottom of the unit, and only DVDs labeled with an identical region code can be played on this unit.

DVDs labeled can also be played.

If you try to play any other DVD, the message [Playback prohibited by region code.] will appear on the monitor screen. Depending on the DVD, no region code may be labeled even though playing the DVD is prohibited by area restrictions.

Copyrights

US and foreign patents licensed from Dolby Laboratories.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

“DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,” and “DVD+RW” are trademarks.

iPhone, iPod, iPod classic, iPod nano, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

Pandora®, the Pandora® logo, and the Pandora® trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

Google, Google Play and Android are trademarks of Google Inc.

libFLAC

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

ˋ Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

ˋ Redistributions in binary form must reproduce

the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

ˋ Neither the name of the Xiph.org Foundation nor

the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

26GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 27 Monday, July 13, 2015 4:36 PM

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product uses font data which is licensed to Sony owned by Monotype Imaging Inc. Such font data shall be used solely in connection with this product.

All other trademarks are trademarks of their respective owners.

Troubleshooting

The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. For details on using the fuse and removing the unit from the dashboard, see “Connection/Installation” (page 33). If the problem is not solved, visit the support site on the back cover.

General

No power is being supplied to the unit.

q Check the fuse. q The connection is not correct.

ˋ Connect the yellow and red power supply

leads.

There is no beep sound.

q An optional power amplifier is connected and

you are not using the built-in amplifier.

The contents of the memory have been erased.

q The power supply lead or battery has been

disconnected or it is not connected properly.

Stored stations and correct time are erased. The fuse has blown. The unit makes noise when the position of the ignition is switched.

q The leads are not matched correctly with the car’s

accessory power connector.

The display disappears from/does not appear on the monitor.

q The dimmer is set to [ON] (page 19). q The display disappears if you press and hold

HOME. ˋ Press HOME on the unit until the display

appears.

q The monitor off function is activated (page 20).

ˋ Touch anywhere on the display to turn the

display back on.

The display does not respond to your touch correctly.

q Touch one part of the display at a time. If two or

more parts are touched simultaneously, the display will not operate correctly.

q Calibrate the touch panel of the display (page 19). q Touch the pressure sensitive panel firmly. q The rear monitor cannot be operated. Icons

displayed on the rear monitor are disabled.

Menu items cannot be selected.

q Unavailable menu items are displayed in gray.

Radio reception

The stations cannot be received. The sound is hampered by noise.

q The connection is not correct.

ˋ Connect the REM OUT lead (blue/white striped)

or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in radio antenna (aerial) in the rear/side glass).

ˋ Check the connection of the car antenna

(aerial).

ˋ If the auto antenna (aerial) will not extend,

check the connection of the power antenna (aerial) control lead.

Preset tuning is not possible.

q The broadcast signal is too weak.

RDS

PTY displays [PTY not found.].

q The current station is not RDS station. q RDS data has not been received. q The station does not specify the program type.

Picture

There is no picture/picture noise occurs.

q A connection has not been made correctly. q Check the connection between this unit and

other equipment and set the input selector of the equipment to the source corresponding to this unit.

q The disc is defective or dirty (XAV-W650BT).

27GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 28 Monday, July 13, 2015 4:36 PM

q Installation is not correct.

ˋ Install the unit at an angle of less than 45° in a

sturdy part of the car.

q The parking cord (light green) is not connected to

the parking brake switch cord, or the parking brake is not applied.

The picture does not fit in the screen.

q The aspect ratio is fixed on the playback source.

There is no picture/picture noise occurs in the rear monitor.

q A source/mode which is not connected is

selected. If there is no input, no picture appears in the rear monitor.

q The color system setting is incorrect.

ˋ Set the color system to [PAL] or [NTSC]

according to the connected monitor (page 19).

q The picture of the rear view camera is displayed

on this unit. ˋ No picture appears in the rear monitor if the

picture of the rear view camera is displayed on this unit.

Sound

There is no sound/sound skips/sound cracks.

q A connection has not been made correctly. q Check the connection between this unit and the

connected equipment and set the input selector of the equipment to the source corresponding to this unit.

q The disc is defective or dirty (XAV-W650BT). q Installation is not correct.

ˋ Install the unit at an angle of less than 45° in a

sturdy part of the car.

q The MP3 file sampling rate is not 32, 44.1, or 48

kHz.

q The WMA file sampling rate is not 44.1 kHz. q The MP3 file bit rate is not 48 to 192 kbps. q The WMA file bit rate is not 48 to 192 kbps. q The unit is in pause/reverse/fast-forward mode. q The settings for the outputs are not made

correctly.

q The DVD output level is too low (page 14) (XAV-

W650BT).

q The volume is too low. q The ATT function is activated. q The format is not supported.

ˋ Check if the format is supported by this unit

(page 22).

Sound is noisy.

q Keep cords and cables away from each other.

Disc operation (XAV-W650BT)

The disc does not play.

q The disc is defective or dirty. q The disc is not playable. q The DVD is not playable due to the region code.

q The disc is not finalized (page 22). q The disc format and file version are incompatible

with this unit (page 21).

q Press ì to remove the disc.

MP3/WMA/Xvid/MPEG-4 files do not play.

q Recording was not performed according to the

ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 22).

q The file extension is incorrect (page 22). q Files are not stored in MP3/WMA/Xvid/MPEG-4

format.

q If the disc contains multiple file types, only the

selected file type can be played. ˋ Select the appropriate file type using the list

(page 21).

MP3/WMA/Xvid/MPEG-4 files take longer to play than others.

q The following discs take a longer time to start

playback. ˋ a disc recorded with a complicated tree

structure.

ˋ a disc to which data can be added.

Certain functions cannot be performed.

q Depending on the disc, you may not be able to

perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc.

The soundtrack/subtitle language or angle cannot be changed.

q Use the DVD menu instead of the direct selection

button on the remote commander (page 11).

q Multilingual tracks, multilingual subtitles, or

multi-angles are not recorded on the DVD.

q The DVD prohibits changing.

The operation buttons do not function.

q Press the reset button (page 7).

The disc will not eject. The disc will not insert.

q Press and hold the disc eject button.

USB playback

Items cannot be played via a USB hub.

q Connect iPod/USB devices to this unit without

USB hub.

Items cannot be played.

q Reconnect the USB device.

The USB device takes longer to play.

q The USB device contains large-sized files or files

with a complicated tree structure.

28GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Right

010book.book Page 29 Monday, July 13, 2015 4:36 PM

The sound is intermittent.

q The sound may be intermittent at a high bit rate

of more than 320 kbps.

Audio file cannot be played.

q USB device formatted with file systems other

than FAT16, FAT32, or exFAT are unsup ported.*

* This unit supports FAT16, FAT32, and exFAT, but some

USB device may not support all of these. For details, refer to the operating instructions of each USB device or contact the manufacturer.

NFC function

One touch connection (NFC) is not possible.

q If the smartphone does not respond to the touch.

ˋ Check that the NFC function of the smartphone

is turned on.

ˋ Move the N-Mark part of the smartphone

closer to the N-Mark part on this unit.

ˋ If the smartphone is in a case, remove it.

q NFC receiving sensitivity depends on the device.

If One touch connection with the smartphone fails several times, make the BLUETOOTH connection manually.

BLUETOOTH function

The other BLUETOOTH device cannot detect this unit.

q Set [Bluetooth Connection] to [ON] (page 19). q While connecting to a BLUETOOTH device, this

unit cannot be detected by another device. Terminate the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices.

Connection is not possible.

q Check the pairing and connection procedures in

the manual of the other device, etc., and perform the operation again.

The name of the detected device does not appear.

q Depending on the status of the other device, it

may not be possible to obtain the name.

There is no ringtone.

q Raise the volume while receiving a call.

The talker’s voice volume is low.

q Raise the volume during a call.

The other party says that the volume is too low or high.

q Adjust the [MIC Gain] level (page 16).

Echo or noise occurs during call conversations.

q Reduce the volume.

q If ambient noise other than the phone call sound

is loud, try reducing this noise.

ˋ Shut the window if road noise is loud. ˋ Lower the air conditioner if the air conditioner

is loud.

The phone sound quality is poor.

q Phone sound quality depends on reception

conditions of the cellular phone. ˋ Move your car to a place where you can

enhance the cellular phone’s signal if the reception is poor.

The volume of the connected BLUETOOTH device is low or high.

q Volume level will differ depending on the

BLUETOOTH device. ˋ Reduce the volume level differences between

this unit and the BLUETOOTH device (page 13).

The sound skips during audio streaming or the BLUETOOTH connection fails.

q Reduce the distance between the unit and the

BLUETOOTH device.

q If the BLUETOOTH devi ce is stored in a case which

interrupts the signal, remove the case while using the device.

q Several BLUETOOTH devices or other devices (e.g.

ham radio devices) which emit radio waves are used nearby.

ˋ Turn off the other devices. ˋ Increase the distance between the unit and

other devices.

q Playback sound stops momentarily when this

unit is connecting to a cellular phone. This is not a malfunction.

You cannot control the connected BLUETOOTH device during audio streaming.

q Check that the connected BLUETOOTH device

supports AVRCP.

Some functions do not work.

q Check that the connecting device supports the

functions in question.

A call is answered unintentionally.

q The connecting phone is set to start a call

automatically.

q [Auto Answer] of this unit is set to [ON] (page 16).

Pairing failed due to time out.

q Depending on the connecting device, the time

limit for pairing may be short. Try completing the pairing within the time by setting a single digit passkey.

The BLUETOOTH function cannot be operated.

q Exit the source by pressing and holding SOURCE

for 1 second, then turn on the unit.

29GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

F:\#Sagyou\0713\4577696111\4577696111XAVW650BTUC\01GB-XAVW650BTUC\040CD.fm masterpage: Left

010book.book Page 30 Monday, July 13, 2015 4:36 PM

No sound is output from the car speakers during a handsfree call.

q If the sound is output from the cellular phone, set

the cellular phone to output the sound from the car speakers.

Siri Eyes Free is not activated.

q Perform the handsfree registration for an iPhone

that supports Siri Eyes Free.

q Set the Siri function on the iPhone to on. q Cancel the BLUETOOTH connection with the

iPhone and the unit, and reconnect.

SongPal operation

Application name is mismatched with the actual application in “SongPal.”

q Launch the application again from the “SongPal”

application.

Pandora® operation

Pandora® connection is not possible.

q Shut down the Pandora® application on the

mobile device, then launch it again.

Error displays/messages

Hubs not supported.

q USB hubs are not supported on this unit.

No Playable Data

q The disc does not contain playable data (XAV-

W650BT).

q The iPod has no playable data.

ˋ Load music data/files into the iPod.

q The USB device has no playable data.

ˋ Load music data/files into the USB device.

Cannot play this content.

q The currently selected content cannot be played

back. ˋ Playback content will be skipped to the next

one.

Overcurrent Caution on USB

q The USB device is overloaded.

ˋ Disconnect the USB device, then change the

source by pressing the SOURCE button.

ˋ Indicates that the USB device is out of order, or

an unsupported device is connected.

USB device not supported

q For details on the compatibility of your USB

device, visit the support site on the back cover.

Device no response

q The unit does not recognize the connected USB

device.

ˋ Reconnect the USB device. ˋ Check that the USB device is supported by the

unit.

q The character cannot be displayed with the unit.

For BLUETOOTH function

Bluetooth Connection Error

q An error has occurred between this unit and the

BLUETOOTH phone. ˋ Check that the BLUETOOTH signal is set to on

for this unit or the BLUETOOTH phone.

ˋ Try pairing again. ˋ Reconnect the BLUETOOTH phone.

Bluetooth device is not found.

q The unit cannot detect a connectable

BLUETOOTH device. ˋ Check the BLUETOOTH setting of the

connecting device.

q No device is in the list of registered BLUETOOTH

devices. ˋ Perform pairing with a BLUETOOTH device

(page 8).

Call Data Error

q An error has occurred while accessing

phonebook data via PBAP or call history from the BLUETOOTH phone. ˋ Reconnect the BLUETOOTH phone.

Data Listing Error

q An error has occurred while displaying

phonebook data via PBAP or call history from the BLUETOOTH phone. ˋ Reconnect the BLUETOOTH phone.

Handsfree device is not available.

q A cellular phone is not connected.

ˋ Connect a cellular phone (page 8).

For disc operation (XAV-W650BT)

Disc Error

q The unit cannot read the data due to some

problem.

q The data is damaged or corrupted. q The disc is corrupted. q The disc is incompatible with this unit. q The disc is not finalized. q The disc is dirty or inserted upside down.

ˋ Clean or insert the disc correctly.

q A blank disc has been inserted.

30GB

XAV-W650BT/XAV-V630BT

4-577-696-11(1)

+ 90 hidden pages