Sony Trinitron KV-J25, Trinitron KV-J29 Operating Instructions Manual
3-858-501-11 (1)
Trinitron Color TV
Operating Instructions
####
####
1996 by Sony Corporation
C1
C2
EN
KV-J25
KV-J29
MF, MH,MN
2
20 mm
3.8 mm
3
p KV-J25MH2/J29MH2/J25MN21/J29MN21
2
ENTER
VIDEO
S VIDEO
(MONO)
L–AUDIO–R
MENU
AUTO
PROGR
AUTO
PROGR
TV SYS: B / G
AUT O P ROGRAM
VHF LO W
PR: 01
1
VIDEO 3 INPUT
1
4
Getting Started
-EN
5
WARNING Table of contents
• Dangerously high voltages are present inside the TV.
• Operate the TV only at 110-240 V AC.
• Do not open the cabinet and the rear cover of the TV.
Refer servicing to qualified personnel.
• To prevent fire or shock hazard, do not expose the TV
to rain or moisture.
• Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by qualified
personnel only.
• Do not block the ventilation openings.
• Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
• Do not install the TV in hot, humid or excessively
dusty places.
• Do not install the TV where it may be exposed to
mechanical vibrations.
• Do not keep the TV plugged in if you are not going to
use it for several days.
• Do not pull the power cord to disconnect the TV. Pull
it out by the plug.
• Use only the supplied screws (as shown on page 2) to
fasten the TV to the TV stand or to stabilize the TV
against a wall or a pillar. Use of other screws may
damage the TV.
Note on the TV Illustrations
• The TV illustrations of the KV-J25MF1/J29MF1 models have
been used for the illustration purposes in this manual. Any
difference in operations between models is clearly indicated in
the text for example, “KV-J25MH2/J29MH2/J25MN21/
J29MN21 only.”
Note on the remote commander
• The supplied remote commander is used on several models of
the TV. If you do not find instructions for some controls that
are on the remote commander, that means your TV does not
employ the features of those controls, e.g. TEXT.
Notes
• When you turn on the TV, you may hear the “boon” sound
that is caused by the demagnetization of the TV. This does not
indicate a malfunction.
• The picture color may become abnormal if you change the
direction of your TV. To obtain the normal picture color, press
POWER on the TV to turn off the TV for five minutes and then
turn it on again.
Getting Started
6 Connections
8 Introducing the menus
9 Changing the menu language
10 Presetting channels
Operations
12 Watching the TV
15 Adjusting the picture and sound
17 Listening to the woofer sound (3D WOOFER)
18 Listening to the surround sound (SURROUND)
19 Selecting a stereo or bilingual program
20 Viewing Teletext
22 Customizing the TV
Additional Information
23 Troubleshooting
Back Specifications
cover
All contents are subject to change without notice.
Design and specificafions are subject to change without
notice.
EN
Getting Started
6
-EN
Connections
Connecting the 3D WOOFER
p KV-J25MH2/J29MH2/J25MN21/J29MN21 only
1 Attach the 3D WOOFER into the footholds on the top of the TV.
2 Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of the TV.
The red wire should be connected to the ‘ red terminal and the black wire to the ’ black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise the TV may malfunction.
• Unplug the TV from the wall outlet when connecting the 3D WOOFER.
• Make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring speaker terminal, to prevent a
malfunction caused by a short circuit of the terminals.
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the (antenna) socket at the rear of the TV.
Red wire
Black wire
Rear of TVRear of TV
or
3D WOOFER
1
2
On a wall
Getting Started
Getting Started
-EN
7
VIDEO IN
MON/TV
OUT
2
1
VIDEO
AUDIO
L
R
(MONO)
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video
game, or stereo system.
Connecting video equipment using video input jacks
or
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
to video and
audio inputs
: Signal flow
VCR
to
antenna
output
Audio system
to
antenna
socket
Rear of TV
to audio
inputs
When connecting a monaural VCR
Connect the yellow plug to VIDEO and the black plug to AUDIO-L (MONO).
When connecting a VCR to the (antenna) terminal
Preset the signal output from the VCR to the program position 0.
If both S Video and video signals are input simultaneously
The S Video input signal is selected. To view a video input signal, disconnect the S Video connection.
Note on the video input
When no signal is input, the screen becomes blue.
Connecting audio/video equipment using MON/TV OUT jacks
VIDEO
S VIDEO
(MONO)
L–AUDIO–R
VIDEO 3 INPUT
VIDEO IN
MON/TV
OUT
2
1
L
R
(MONO)
VIDEO
AUDIO
Front of TV
Rear of TV
to
antenna
socket
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
: Signal flow
VCR
to
antenna
output
to video and
audio outputs
Camcorder
to video and
audio outputs
to S video output
: Signal flow
Getting Started
8
-EN
Introducing the
menus
A/V CONTROL
You can preset TV channels, adjust the picture and sound qualities, and select some settings using the on-screen
menus. You can use the buttons on both the remote commander and the TV to operate the menus.
Notes (except for AUTO PROGRAM)
• When a menu is selected after pressing ENTER, the color of
both the menu and the menu symbol change and the cursor
(z) appears beside the first item of the menu.
• When an item on the menu is selected after pressing ENTER,
the color of the item changes.
• You can refer to the guide (
) at the bottom of the
menus (except for the A/V CONTROL and PRESET menus)
for the basic operations of the menu.
• If more than approximately 60 seconds elapse after you press a
button, the menu screen disappears automatically.
PRESET
BASS
80
00
80
TREBLE
BALANCE
AUDIO ADJUST
3D WOOFER : ON
∗
∗∗
∗
TV SYS: B /G
AUT O PROGRAM
VHF LO W
PR: 01
TV SYS: B /G
VHF LO W
PR: 01
MANUA L PROGRAM
A / V CONTROL
DYNAMIC
SOFT
STANDARD
PERSONAL
V I DEO ADJUST
AUDIO ADJUST
T I LT CORRECT:
0
PRESET
SKIP:
PR02 OFF
TV SYS: B /G
COL
SYS : AUTO
ENGL I SH
AUT O PROGRAM
MANUA L P ROGRAM
L ANGUA GE /
:
P I CTURE
40
100
0
80
V I DEO ADJUST
COLOR
BR I GHT
HUE
SHARP
VM: HIGH
45
0
FEATURES
(∗KV-J29MF1/J29MF1S/J29MH2/J29MN21 only)
(∗∗KV-J25MH2/J29MH2/J25MN21/J29MN21 only)
Getting back to the previous menu
(except for AUTO PROGRAM)
Press + or – to move the cursor (z) to the first
line (N) of each menu, and press ENTER.
Cancelling the menu screen
Press MENU.
SURROUND :
OFF
MONITOR
AV OUT :
FEAT URES
Loading...