Sony STRDE-698 Service manual

STR-DE598/DE698/DV10

SERVICE MANUAL

Ver. 1.1 2005. 04

Photo: STR-DE698

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.

SPECIFICATIONS

US Model

STR-DE598/DE698/DV10

Canadian Model

AEP Model

UK Model

E Model

Australian Model

STR-DE598/DE698

AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC

DISTORTION: (Models of area code US only)

With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 90 watts per channel (DE598/DE698) or 80 watts per channel (DV10) minimum RMS power , with no more than

0.09 % total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Power Output

Models of area code US, CND Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)

(8 ohms 1 kHz, THD 0.7 %)

(8 ohms 1 kHz, THD 10 %)

Reference Power Output (8 ohms 20 Hz – 20 kHz, THD 0.09 %)

90 W + 90 W 80 W + 80 W

100 W + 100 W 90 W + 90 W

125 W + 125 W 115 W + 115 W

1)

FRONT

CENTER

SURR

SURR BACK

1)

(DE598/DE698)

1)

(DV10)

1)

(DE598/DE698)

1)

(DV10)

1)

(DE598/DE698)

1)

(DV10)

2)

: 90 W/ch (DE598/DE698)

80 W/ch (DV10)

2)

: 90 W (DE598/DE698)

80 W (DV10)

2)

: 90 W/ch (DE598/DE698)

80 W/ch (DV10)

2)

: 90 W (DE598)

90 W/ch (DE698) 80 W/ch (DV10)

(8 ohms 1 kHz, THD 0.7 %)

(8 ohms 1 kHz, THD 10 %)

2)

FRONT

: 100 W/ch (DE598/DE698)

90 W/ch (DV10)

2)

CENTER

SURR

SURR BACK

FRONT

CENTER

SURR

SURR BACK

: 100 W (DE598/DE698)

90 W (DV10)

2)

: 100 W/ch (DE598/DE698)

90 W/ch (DV10)

2)

: 100 W (DE598)

2)

: 125 W/ch (DE598/DE698)

115 W/ch (DV10)

2)

: 125 W (DE598/DE698)

115 W (DV10)

2)

: 125 W/ch (DE598/DE698)

115 W/ch (DV10)

2)

: 125 W (DE598)

100 W/ch (DE698) 90 W/ch (DV10)

125 W/ch (DE698) 115 W/ch (DV10)

– Continued on next page –

9-879-487-02

FM STEREO/FM-AM RECEIVER

Sony Corporation

Audio Group Published by Sony Engineering Corporation

1

STR-DE598/DE698/DV10

Ver. 1.1

Models of area code AEP, UK, E2, AUS, AR, KR, TW Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)

80 W + 80 W (EXCEPT AEP , UK) 90 W + 90 W 70 W + 70 W

(8 ohms 1 kHz, THD 0.7 %)

100 W + 100 W 90 W + 90 W

(8 ohms 1 kHz, THD 10 %)

120 W + 120 W (EXCEPT AEP , UK) 125 W + 125 W 110 W + 110 W

Reference Power Output

1)

(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

FRONT CENTER SURR SURR BACK

2)

: 110 W/ch

2)

: 110 W

2)

: 110 W/ch

1)

(AEP, UK)

3)

1)

3)

1)

(AEP, UK)

3)

2)

: 110 W (DE598) 110 W/ch (DE698)

(8 ohms 1 kHz, THD 0.7 %)

2)

FRONT

: 120 W/ch

2)

CENTER

2)

SURR

: 120 W/ch

SURR BACK

: 120 W

2)

: 120 W (DE598) 120 W/ch (DE698)

(8 ohms 1 kHz, THD 10 %)

2)

FRONT

: 150 W/ch

2)

CENTER

2)

SURR

: 150 W/ch

SURR BACK

: 150 W

2)

: 150 W (DE598) 150 W/ch (DE698)

1) Measured under the following conditions: Area code Power requirements

US, CND 120 V AC, 60 Hz AEP, UK, AR, KR 230 V AC, 50 Hz E2, AUS 240 V AC, 50 Hz TW 110 V AC, 60 Hz

2) Depending on the sound field settings and the source, there may be no sound output.

3) Measured under the following conditions:

Area code Power requirements AR, KR 220 V AC, 50 Hz

Frequency response MULTI CH IN, SA-CD/ 10 Hz – 70 kHz

CD, MD/TAPE, DVD, +0.5/–2 dB (with sound AUX (DE698/DV10), field and tone (DE598) or VIDEO 1, 2, 3 equalizer (DE698/DV10)

bypassed)

Inputs (Analog) MULTI CH IN, SA-CD/ Sensitivity: 500 mV

CD, MD/TAPE, DVD, Impedance: 50 k ohms AUX (DE698/DV10), S/N VIDEO 1, 2, 3 (A, 500 mV

4)

: 96 dB

5)

)

4) INPUT SHORT (with sound field and tone (DE598) or equalizer (DE698/DV10) bypassed).

5) Weighted network, input level.

Inputs (Digital) DVD, Sensitivity: –

SA-CD/CD (DE698/ Impedance: 75 ohms DV10) (Coaxial) S/N: 100 dB

(A, 20 kHz LPF)

VIDEO 2, Sensitivity: – 3, MD/TAPE (DE698/ Impedance: – DV10), S/N: 100 dB SA-CD/CD (Optical) (A, 20 kHz LPF)

Outputs (Analog) MD/TAPE (OUT), Voltage: 500 mV

VIDEO 1 (AUDIO OUT) Impedance: 10 k ohms SUB WOOFER Voltage: 2 V

Impedance: 1 k ohms

Outputs (Digital) (DE698/DV10) MD/TAPE (Optical) Sensitivity: –

Tone (DE598), Equalizer (DE698/DV10) Gain levels ±6 dB, 1 dB step

FM tuner section

Tuning range 87.5 – 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz Sensitivity

Mono: 18.3 dBf, 2.2 µV/75 ohms

Stereo: 38.3 dBf, 22.5 µV/75 ohms Useable sensitivity 11.2 dBf, 1 µV/75 ohms S/N

Mono: 76 dB

Stereo: 70 dB Harmonic distortion at 1 kHz

Mono: 0.3%

Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz – 15 kHz,

+0.5/–2 dB

Selectivity 60 dB at 400 kHz

AM tuner section

Tuning range

Models of area code US, CND

With 10-kHz tuning scale: 530 – 1,710 kHz

With 9-kHz tuning scale: 531 – 1,710 kHz

Models of area code E2

With 10-kHz tuning scale: 530 – 1,610 kHz

With 9-kHz tuning scale: 531 – 1,602 kHz

6)

Models of area code AEP, UK, AUS, TW, KR

With 9-kHz tuning scale: 531 – 1,602 kHz

Models of area code AR

With 10-kHz tuning scale: 530 – 1,610 kHz Antenna Loop antenna Intermediate frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or

999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5 % (50 mV/m, 400 Hz) Selectivity

At 9 kHz: 35 dB At 10 kHz: 40 dB

6) You can change the AM tuning scale to 9 kHz or 10 kHz.

After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.

Video section

Inputs/Outputs

Video: 1 Vp-p, 75 ohms S-video: Y: 1 Vp-p, 75 ohms (DE698/DV10) C: 0.286 Vp-p, 75 ohms COMPONENT VIDEO: (Except for models of area code DE598: AEP, UK)

Y: 1 Vp-p, 75 ohms

PB/CB/B-Y: 0.7 Vp-p,

75 ohms

PR/CR/R-Y: 0.7 Vp-p,

75 ohms

80 MHz HD Pass Through

2

STR-DE598/DE698/DV10

1.5 k

Ω

0.15 µF

AC voltmeter (0.75 V)

To Exposed Metal Parts on Set

Earth Ground

Ver. 1.1

General

Power requirements Area code Power requirements

US, CND 120 V AC, 60 Hz AEP, UK 230 V AC, 50/60 Hz AUS 240 V AC, 50 Hz AR, KR 220 – 230 V AC, 50/60 Hz E2 120/220/240 V AC, 50/60 Hz TW 110 V AC, 50/60 Hz

Power consumption Area code Power consumption

DE598: US, AEP, 220 W UK, E2, AUS, KR, AR DE598: CND 300 VA DE598: TW 500 W DE698/DV10: US, 230 W AEP, UK, E2, AUS, AR DE698: CND 310 VA

Power consumption (during standby mode)

0.2 W

AC outlets (DE698: EXCEPT E2/DV10) Area code AC outlets

US, CND 1 switched, 120 W/1A MAX AEP, UK, E2, AUS 1 switched, 100 W MAX

Dimensions (w/h/d) (Approx.) DE598: 430 × 157.5 × 310 mm

(16 7/8 × 6 2/8 × 12 2/8 inches) including projecting parts and controls

DE698/DV10: 430 × 157.5 × 370 mm

(16 7/8 × 6 2/8 × 14 4/8 inches) including projecting parts and

controls Mass (Approx.) DE598: 8.0 kg (17 lb 11 oz) DE698/DV10: 9.0 kg (19 lb 14 oz)

Supplied accessories

FM wire antenna (1) AM loop antenna (1) Remote commander RM-AAU001 (1) (DE598/DV10) Remote commander RM-AAP001 (1) (DE698) R6 (size-AA) batteries (2)

Design and specifications are subject to change without notice.

•Abbreviation

CND : Canadian model E2 : AC 120 V area in E model AUS: Australian model AR : Argentina model KR : Korean model TW : Taiwan model

SAFETY CHECK-OUT (US MODEL)

After correcting the original service problem, perform the following safety check before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampers.). Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments.

2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate lowvoltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)

Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY P ARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

3

STR-DE598/DE698/DV10

Ver. 1.1

MODEL IDENTIFICATION

— BACK P ANEL —

Part No.

MODEL PART No.

STR-DE598: US 2-515-627-0s STR-DE598: CND 2-515-627-1s STR-DE598: AEP , UK 2-515-627-3s STR-DE598: AUS 2-515-627-4s STR-DE598: TW 2-515-627-5s STR-DE598: KR 2-515-627-6s STR-DE598: E2 2-515-627-7s STR-DE598: AR 2-515-627-8s STR-DE698: US 2-541-614-0s STR-DE698: CND 2-541-614-1s STR-DE698: AEP , UK 2-541-614-3s STR-DE698: AUS 2-541-614-4s STR-DE698: E2 2-541-614-5s STR-DE698: AR 2-541-614-6s STR-DV10: US 2-541-614-7s

•Abbreviation CND: Canadian model E2 : AC 120 V area in E model AUS: Australian model AR : Argentina model KR : Korean model TW : T aiw an model

GENERAL

STR-DE598:

List of button locations and reference pages

STR-DE598/DE698/DV10

This section is extracted from instruction manual.

How to use this page

Use this page to find the location of buttons that are mentioned in the text.

Main unit

ALPHABETICAL ORDER

A - H

A.F.D. (button/indicator) qa (31,

33) AM wa (22, 23, 24, 25, 41) DIMMER 4 (27) DISPLAY 3 (26, 27, 50) Display 7 (26, 27) DVD wg (22) ENTER qg (17, 18 , 41) FM ws (22, 23, 24, 25, 41) FM MODE es (23)

I - O

Input buttons w; (22, 36, 40, 41,

50) INPUT MODE qj (36)

IR (receptor) 5 (44, 50) MAIN MENU 8 (18, 37, 38, 41) MASTER VOLUME –/+ qh (17,

21, 22, 49) MD/TAPE wf (22) MEMORY ef (24, 25) MOVIE (button/indicator) qs

(32, 33, 50) MULTI CHANNEL DECODING

(indicator) 6 (23) MULTI CH IN 9 (23) MUSIC (button/indicator) qd ( 33,

50)

P - Z

PHONES (jack) ed (22, 49) PRESET TUNING –/+ wl (25,

53)

on number

r

DISPLAY

Name of button/part Reference page

3 (26, 27, 50)

RR

SA-CD/CD wd (22) SPEAKERS (OFF/A/B/A+B) 2

(16, 42, 49)

SURR BACK DECODING qf

(34) TUNING –/+ e; (23, 53) VIDEO 1 wk (22) VIDEO 2 wj (22) VIDEO 3 wh (22) VIDEO 3 IN/PORTABLE AV IN

(jacks) ea (13)

NUMBERS AND SYMBOLS

2CH (button/indicator) q; (30,

33, 38) ?/1 (power) 1 (17, 18, 24, 38,

53) </> ql (18, 37, 38, 41) +/– qk (18, 37, 39, 41)

54

1

2

6534

7

8

9q;qaqs qfqd qg

wawswdwfwgwhwjwk

wle;edesef ea

GB

qk

;

qjqlqh

5

STR-DE598/DE698/DV10

STR-DE598/DV10:

Operations Using the Remote RM-AAU001

You can use the remote RM-AAU001 to operate the components in your system.

Before you use your remote

Inserting batteries into the remote

Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartme nt. When using the remote, point it at the remote sensor on the receiver.

Tip

Under normal conditions, the batter ie s shou ld la st for about 6 months. When the remote no longe r opera tes the receiver, replace all batteries wit h new ones.

Notes

•Do not leave the remote in an extrem ely hot or humid place.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosio n.

Remote button description

eg ef

ed es ea e;

wl wk

wj

wh

wg

wf

wd

ws wa

TV/VIDEO

TEST

SLEEP

TONE

VIDEO 1 VIDEO 2 VIDEO 3 DVD

MD/TAPE

SA-CD/CD

2CH A.F.D.

123 46

5

78

>10

0/10

-

TOP MENU/

GUIDE MUTING

F

ENTER

Gg

f

RETURN/EXIT

TV CH –

c STEP C

REPLAY ADVANCE

PRESET –

<

.

TUNING –

TV

HmM

TV

?/1

AV

?/1

SYSTEM STANDBY

TUNER

MAIN MENU

MOVIE MUSIC

DUAL MONO

FM MODE

MPX

AUDIO

D.TUNING

ANT

9

SUBTITLE

MEMORY SHIFT

JUMP

ENTER D.SKIPCLEAR ANGLE

AV

MENU

TV VOL

MASTER VOL

DISPLAY

TV CH +

PRESET +

<

>

TUNING +

Xx

1

2 3 4 5 6 7 8

9

q;

qa qs

qd qf

qg

qh qj

qk ql w;

GB

44

6

STR-DE698/DV10:

Illustrati

8

q

w

e

ede

e

q

w

List of button locations and reference pages

STR-DE598/DE698/DV10

How to use this page

Use this page to find the location of buttons that are mentioned in the text.

Main unit

ALPHABETICAL ORDER

A - H

A.F.D. (button/indicator) qa (32,

34) AUX wa (23) DIMMER 4 (28) DISPLAY 3 (27, 28, 56) Display 7 (27, 28) DVD wg (23) ENTER qg (18, 42, 57) FM MODE es (24)

I - O

Input buttons w; (23, 37, 41, 42,

56) INPUT MODE qj (37)

IR (receptor) 5 (45, 57) MAIN MENU 8 (18, 38, 39, 42) MASTER VOLUME –/+ qh (18,

22, 23, 55) MD/TAPE wf (23) MEMORY ef (26) MOVIE (button/indicator) qs

(33, 34, 56) MULTI CHANNEL DECODING

(indicator) 6 (24) MULTI CH IN 9 (24) MUSIC (button/indicator) qd (34,

56)

P - Z

PHONES (jack) ed (23, 55) PRESET TUNING –/+ wl (26,

59)

SA-CD/CD wd (23)

on number

r

DISPLAY 3 (27, 28, 56)

Name of button/part Reference page

RR

SPEAKERS (OFF/A/B/A+B) 2

(16, 43, 55)

SURR BACK DECODING qf

(35)

TUNER FM/AM ws (23, 24, 25,

26, 42) TUNING –/+ e; (24, 59) VIDEO 1 wk (23) VIDEO 2 wj (23) VIDEO 3 wh (23) VIDEO 3 IN/PORTABLE AV IN

(jacks) ea (13)

NUMBERS AND SYMBOLS

2CH (button/indicator) q; (31,

34, 39) ?/1 (power) 1 (18, 25, 39, 57,

59) </> ql (18, 38, 39, 42) –/+ jog dial qk (18, 38, 39, 42)

Additional Information

1

2

6534

7

9q;qa qs qfqd qg

wawswdwfwgwhwjwk

l

s

f

a

;

l

;

j

k

h

GB

61

7

STR-DE598/DE698/DV10

STR-DE698:

Operations Using the Remote RM-AAP001

You can use the remote RM-AAP001 to operate the components in your system.

Before you use your remote

Inserting batteries into the remote

Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. When using the re m ote, point it at the remote sensor on the receiver.

Tip

Under normal conditions, the batteries should last for about 6 months. When the remote no long er ope r ates the receiver, replace all batteries with new ones.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new batt ery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Remote button description

1 2

3 4

5 6

7

8

9

*

q;

qa

ENTER

*

qs

*

qd

TV ?/1 AV ?/1

RM SET UP

SYSTEM STANDBY

VIDEO1 VIDEO2 VIDEO3 DVD

AV1 AV2

MD/TAPE

SA-CD/CD AUX

2CH

A.F.D.

123

456

AUDIO

ANGLE

789

SUBTITLE ENTER

>

.

0/10 >10/11 12

SHIFT

D.TUNING DISC ALT

Mm

ANT

CLEAR

H

TOP MENU/

GUIDE

V

v

DISPLAY

RETURN/EXIT

TV VOL TV CH

P

TUNER

MOVIE

DUAL MONO

JUMP/

TIME

-

SEARCH MODE

X

AV MENU

bB

O

TV/

VIDEO

?/1

SLEEP

MULTI CH

MUSIC

SB

DECODING

PRESET/

CH/D.SKIP

x

MUTING

MASTER

VOL

MAIN

MENU

TEST

TONEWIDE

ef ed

es ea e; wl

wk wj

wh

wg wf

wd ws wa w; ql

qk

qj qh

qg qf

Operations Using the Remote RM-AAP001

*

*The H, TV VOL +, TV CH + and MASTER

VOL + buttons have a tactile dot. Use the tactile dot as a reference when operating the receiver and o t h er audio/video components.

continued

GB

45

8

SECTION 2

)

DISASSEMBLY

Note : This set can be disassemble according to the following sequence.

SET

2-1. CASE

(Page 9)

STR-DE598/DE698/DV10

Ver. 1.1

2-2. FRONT PANEL SECTION

(Page 10)

2-5. STANDBY BOARD

(Page 11)

2-3. BACK PANEL SECTION

(Page 10)

2-4. DIGITAL BOARD

(Page 11)

2-6. MAIN BOARD

(Page 12)

Note : Follow the disassembly procedure in the numerical order given.

2-1. CASE

2-7. SB AMP BOARD

(Page 12)

2

two screws

(+BVTP 3

×

8)

1

two screws

(case 3 TP2)

4

case

3

two screws

(case 3 TP2

9

STR-DE598/DE698/DV10

)

Ver. 1.1

2-2. FRONT P ANEL SECTION

2

CNP791 (4P)

6

two screws

(+BVTP 3

×

8)

1

clip

4

CNP202 (5P)

5

CNP503 (3P

7

two screws

(+BVTP 3

×

8)

2-3. BACK PANEL SECTION

6

CNP600 (4P)

7

CN806 (4P)

5

CNP503 (4P)

8

CNP901

9

front panel section

8

three screws

(+BVTP 3

qg

back panel section

3

CNS505 (21 core)

×

8)

9

three screws

(+BVTP 3

qf

two screws

(+BVTP 3

qd

×

8)

×

8)

two screws

(+BVTP 3

qs

×

8)

five screws

(+BVTP 3

qa

five screws

(+BVTP 3

×

8)

×

8)

10

4

CNP504 (2P)

1

connector (11P)

3

CNP203 (3P)

0

screw

(+BVTP 3

2

CNS509 (13P)

×

8)

2-4. DIGIT AL BOARD

d

3

CNP503 (6P)

8

screw

(+BVTP 3 × 8)

2

CNP504 (5P)

1

STR-DE598/DE698/DV10

CNP505 (9P)

5

0

DIGITAL boar

7

CNP501

6

CNP500

9

bracket (digital)

2-5. ST ANDBY BOARD

5

(+BV3 (3-CR))

2

three screws

CNP804 (3P)

4

CNP902 (2P)

6

STANDBY board

3

1

CNP801 (5P)

CNP903 (2P)

4

screw

(+BVTP 3 × 8)

11

STR-DE598/DE698/DV10

d

s

Ver. 1.1

2-6. MAIN BOARD

5

screw (+BV3 (3-CR))

3

two screws

(+BV3 (3-CR))

2

CNP802 (5P)

1

CNP908 (5P)

4

two screws

(+BV3 (3-CR))

6

MAIN boar

2-7. SB AMP BOARD

1

CN2570 (5P)

5

SB AMP board

4

two screws

(+BVTP 3

×

8)

3

three screw

2

CN2571 (9P)

(transistor)

12

SECTION 3

TEST MODE

STR-DE598/DE698/DV10

Ver. 1.1

FACTORY PRESET MODE

* All preset contents are reset to the default setting. * Procedure:

While depressing the [FM MODE] and the [DISPLAY] buttons simultaneously, press the

?/1 button to turn on the main power .

The message “FA CT OR Y” appears for a moment and the present contents are reset to the default values.

AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE (US, Canadian, E2 model only)

* Either the 9 kHz step or 10 kHz step can be selected for the AM

channel step.

* Procedure:

Press the [AM] (STR-DE598) or [TUNER FM/AM] (STR-DE698/ DV10) button to set AM and press the ?/1 button to turn off the main power. While depressing the [PRESET TUNING +] button or the [TUNING +] button, press the ?/1 button to turn on the main power. Either the message “9k STEP” or “10k STEP” appears for a moment and select the desired step.

SPEAKER SIZE SELECTION MODE

* Either the normal speaker or micro satellite speaker can be se-

lected.

* Procedure:

While depressing the [DIMMER] button, press the ?/1 button to turn on the main power. Either the message “NORM. SP .” or “MICRO SP .” appears for a moment and select the desired speaker size.

FLUORESCENT INDICATOR TUBE TEST MODE

* All fluorescent segments are tested.

When this test is activated, all segments light on at the same time, then each segment lights on one after another.

* Procedure:

While depressing the [TUNING --] and the [SPEAKERS $OFF/A/B/ A+B%] buttons simultaneously, press the ?/1 button to turn on the main power.

1. ALL segments light on.

kHz mft.

MHz

MEMORY

DIRECT

dB

SP A

D

LFE

SW

CR

L

SL S SR

SBL SB SBR

D

SP B SLEEP OPT COAX MULTI CH IN 96/24

D

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

D.RANGE EQ STEREO MONO

[2CH], [A.F.D.], [MOVIE], [MUSIC] and [MULTI CHANNEL DECODING] LED light on.

4. Press the [VIDEO 1] button, all se gments and all LEDs light of f.

5. Every pressing the [VIDEO 1] button turns on each segment and LED one after another in the same order. (Not only the [VIDEO 1] button, b ut also the other b uttons such as [VIDEO 2], [VIDEO 3], [DVD], [MD/TAPE], [SA-CD/CD], [FM] (STR-DE598) or [TUNER FM/AM] (STR-DE698/DV10) and [AM] (STR-DE598) or [AUX] (STR-DE698/D V10) can be used.)

SOUND FIELD CLEAR MODE

* The preset sound field is cleared when this mode is activated.

Use this mode before returning the product to clients upon completion of repair.

* Procedure:

While depressing the [2CH] button, press the ?/1 button to turn on the main power. The message “SF. CLR.” appears for a moment and initialization is performed.

SOFTWARE VERSION DISPLAY MODE

* The software version is displayed. * Procedure:

While depressing the [TUNING --] and the [DISPLAY] buttons simultaneously, press the ?/1 button to turn on the main po wer . The model name, destination and the software version are displayed for a moment.

KEY CHECK MODE

* Button check * Procedure:

While depressing the [TUNING --] and the [MAIN MENU] buttons simultaneously, press the ?/1 button to turn on the main po wer . Either the message “REST 30” (STR-DE598) or “REST 28” (STR-DE698/DV10) appears. Every pressing of any button other than the

?/1 counts down

the buttons. The buttons which are already counted once are not counted again. When all buttons are pr essed “REST 00” appears.

AUTOBETICAL MODE (AEP, UK model only)

* When this mode is used, the receiver scans the broadcasts that

can be received by the tuner, and sets up the broadcasts. Be sure to start scanning after connecting the antenna.

* Procedure:

Check that the antenna is connected. While depressing the [MEMORY] button, press the ?/1 button to turn on the main power. The message “AUTO-BETICAL SELECT” appears for a moment and the receiver starts scanning.

2. Press the [VIDEO 1] button, confirm display.

SP A

D

LFE

LSWR

S

SB

D

SP B SLEEP OPT COAX MULTI CH IN 96/24

D

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

D.RANGE EQ STEREO MONO

kHz mft. MHz

dB

[A.F.D.] and [MUSIC] LED light on.

3. Press the [VIDEO 1] button, confirm display.

SP A

D

DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS

D.RANGE EQ STEREO MONO

kHz mft. MHz

C

SL SR

SBL SBR

D

SP B SLEEP OPT COAX MULTI CH IN 96/24

[2CH], [MOVIE] and [MULTI CHANNEL DECODING] LED light on.

MEMORY

DIRECT

MEMORY

DIRECT

COMMAND MODE SELECTION MODE

* The command mode (AV1 or AV2) of the remote commander

can be selected.

* Procedure:

While depressing the [ENTER] button, press the ?/1 button to turn on the main power. Either the message “C.MODE.AV 1” or “C.MODE.AV 2” appears for a moment and select the desired mode.

13

STR-DE598/DE698/DV10

d

Ver. 1.1

4-1. CIRCUIT BOARDS LOCATION

— STR-DE598 —

SECTION 4

DIAGRAMS

POWER board

TUNING board

HEADPHONE board

VIDEO3 board

AC SELECT board (E2 model)

STANDBY board

DISPLAY board

SPEAKER B (P) board

SPEAKER C/SB board

VIDEO board

DIGITAL boar

MAIN board

— STR-DE698/DV10 —

POWER board

TUNING board

HEADPHONE board

VIDEO3 (DE61) board

AC SELECT board (E2 model)

STANDBY board

OPT3 board

DISPLAY board

SPEAKER B (S) board

SPEAKER C/SB board

S-VIDEO board

SB AMP board

S-VIDEO UP CONVERT board (STR-DE698)

VIDEO board

DIGITAL boar

MAIN board

14

4-2. BLOCK DIAGRAM — TUNER/AUDIO SECTION —

STR-DE598/DE698/DV10

Ver. 1.1

AEP,UK MODEL

EXCEPT

AEP,UK MODEL

ANTENNA

FM 75Ω

COAXIAL

TU+10V

TU+3.3V

3.3V

(STBY)

AM

TN1

FM/AM TUNER UNIT

L-CH

RDS DATA

RDS INT

FM SIG OUT

R-CH

STEREO

TUNED

MUTING

CE

DO

DATA

CLOCK

J400

(DE698/DV10)

J402

(DE598)

R-CH

DE698/DV10

SA-CD/CDINMD/TAPE

AUX

IN

L

R-CH

RDS DATA RDS CLK RDS SIG

STEREO TUNED MUTE

S LATCH DO TUNER DATA T SERIAL CLK SW RY

R-CH

LR

SURROUND

MULTI CH IN

R

R-CH

LR

-5 -6 -1 -2

53 52 43

76 75 78

74 73 17 16 70

J401

-1 -2 -3 -4 -5 -6

LR

FRONT

OUT

LR

R-CH

CENTER

R-CH

VOL DATA

VOL CLK

SYSTEM

CONTROL

IC1101 (1/4)

SUB

WOOFER

MD/TAPEINDVD AUDIO

LRLR

-1 -2 -3 -4

J403

28 27

R-CH

DIGITAL

SECTION

(Page 16)

VIDEO 3 INPUT

IN

R-CH

AUDIO

LR

-2 -3-3 -4

R-CH

J298 (2/2)

DIR

FUNCTION SELECT

IC401

46

28 32 30

SEL SW

34 36 38

L

SEL

MCU

60

I/F

59

SL

SEL

+7V-7V

68 66

AVCCAVEE

R-CH

44

45

24

25 26 27 41

42

88

87

85

84

VIDEO 1

AUDIO OUT AUDIO INAUDIO IN

LR L

-3 -4 -5 -6 -1 -2

VIDEO 2

RLR

J404

L-CH

R-CH

FL-CH

FR-CH

SL-CH

SR-CH

DIGITAL

A

SECTION

(Page 16)

C

SECTION

POWER

(Page 19)

R-CH

86

81

83

82

5 7

SUB WOOFER

10

13

12

17

R-CH

11

R-CH

14

R-CH

SBR OUT SBL OUT

SW OUT

B

C OUT

SL OUT

L OUT

R-CH

SBL SEL

55

R-CH

54 56 51 52 49

SW SEL

SEL

C

AMP

IC402

C-CH

SBL-CH

SBR-CH

RELAY

DRIVER

Q560

RY560

J309

AUDIO

OUT

SUB

WOOFER

STR-DE598/DE698/DV10

• Signal path : TUNER (FM/AM) : VIDEO (AUDIO) : CD (ANALOG)

• R-ch is omitted due to same as L-ch.

15 15

STR-DE598/DE698/DV10

Ver. 1.1

4-3. BLOCK DIAGRAM — DIGITAL SECTION —

TUNER/

AUDIO

SECTION

(Page 15)

DIGITAL

A

DE698/DV10

MD/TAPE

(OPTICAL)

(COAXIAL)

DE698/DV10

SA-CD/CD

(OPTICAL)

SA-CD/CD

(OPTICAL)

VIDEO 2

(OPTICAL)

MD/TAPE

(OPTICAL)

VIDEO3

DIGITAL

(OPTICAL)

DE698/DV10

L-IN

R-IN R-CH

+5V-2

OUT

DVD

-1

IN

-2

IN

DE598

IN

INPUT

A.5V

IC1353

J1301

IC1354

IC1351

IC1352

IC200

DIN

OUT

A/D

CONVERTER

IC1401

SWITCH

DOUT

15 2

LRCK

13

SCLK

14

RST

6

IC1301

DOUT

2

DIN2

5

INPUT

DIN1

4

DIN0

3

21

XOUT

22

XIN

VDD

+3.3V

Q1105

INV.

Pa,Pb DETECTION LOCK

MICROPROCESSOR

CLKCEDIDOBPSYNC

38 37 36 35 33 47 17

SYS CLK

16

23

8

AUDIO

D1105

I/F

DIGITAL AUDIO I/F RECEIVER

X1301

12.288MHz

LIN

1

3

1

ADC

IC1303

WAVE

SHAPER

IC1103

WAVE

SHAPER

SELECTOR

IC1302

3 7 5 6 4

AB

14 2

LPF

B

A

1

DATA

DEMODULATOR

C bit DETECTION

I/F

DE598

XMCK

DETECTION

XMODE

XSTATE

48

D/A CONVERTER

IC1507

SDI

RST

CKOUT

DATAO

ERROR

IC1506

Y

5 2

S

6 1 3 6 16

20

CKSEL1

NC

DE698/DV10

SDO

DAC

LRI

AUDIO

LRCK

18

BCKI

BYP

24

13 22

BCK

14 29

15 28

16 30

D1301

34 59

DE598

+2.6V

+3.3V

VDDI

VDDE

18

69

15

17

37

SDI1

GP8

KFSI0

BCKI2

LRCKI2

SDI2

LRCKI1

BCKI1

EXLOCK

GP12

GP9

68

HCS

HACN

2 11336 35 33 3432

DSP

IC1501

XRST

PM

SD01 SD02 SD03

SD04

SCKOUT

LRCKO

BCKO

MCLK1

MCLK2

CSO

WEO

BST

HDIN

HDOUT

D0-15A0-15

HCLK

23 24 25

26

SCKOUT

14

LRCKO

19

BCKO

20

9

X1502

13.9MHz

12

44 45

98,80 - 77,75 - 72

108,107,105 -102,99,

85-82,66 - 64

112,110,109,97 - 92,

SWITCH

IC1503

56

5

6

SDRAM

IC1502

CS

6

17

WE

D0-15A0-15

16-13,10 - 7

29 - 32,35 - 38,

1 - 5,18 - 21

24 - 27,42 - 44,

LRCKO

2

1

SCKOUT LRCKO BCKO

8CH DAC

IC1452

VOUT5

DATA3

47

DATA1

45

DATA2

46

SCKI

38

LRCK

41

BCK

40

DATA4

31

RST

37

ML

36

MC

35

MDI

34

MDO

33

DAC

VOUT6

VOUT1

VOUT2

VOUT3

VOUT4

VOUT7

VOUT8

9

14

12

11

16

20

• Signal path : TUNER (FM/AM) : VIDEO (AUDIO)

AMP

IC1403

R-CH

L OUT

SL OUT

C OUT

TUNER/

B

AUDIO

310

5

AMP

IC1405

5

3

AMP

IC1404

3

1

7

1

SECTION

5

AMP

IC1406

5

3

7

1

SW OUT

SBL OUT

SBR OUT

(Page 15)

: CD (ANALOG) : CD (DIGITAL)

Q1103

INV.

Q1104

GATE

D1106

D1103

SYSTEM_MUTE

24

99

ERROR

25

ANA/DIG

95 96 97 98

DIR DI

DIR CE

DIR_CLK

DIR DO

94

DIR CKSEL1

93100

DIR_XMODE

DIR_XSTATE

91

SELECT1

90

SELECT2

22

21

9

DIR/AD

DIR_DATAO

PCM1800 RST

8

GP12

DLY BYPASS

21

GP9

HCS

6 74 18 19 205

HACN

XRST

PM

HDIN

HDOUT

HCLK

92

BST SEL

SYSTEM

CONTROL

IC1101 (2/4)

3

BST

PCM1608ML

PCM1608MC

PCM1608RST

PCM1608MDI

1514131210

PCM1608MDO

: VIDEO

• R-ch is omitted due to same as L-ch.

STR-DE598/DE698/DV10

1616

4-4. BLOCK DIAGRAM — VIDEO SECTION —

VIDEO 2

COMPONENT

VIDEO

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 1

DVD

IN

DVD

IN

DVD

INPUT

P

B/CB/

P

R/CR/

P

B/CB/

R/CR/

P

-2

S-VIDEO

IN

-1

S-VIDEO

IN

-1

VIDEO

IN

-2

VIDEO

IN

-1

VIDEO

IN

-1

VIDEO

J301 (1/2)

Y

B-Y

R-Y

Y

B-Y

R-Y

J201 (1/2)

J200 (1/2)

J298 (1/2)

J253 (1/2)

Y

C

J252 (1/2)

Y

C

-4

-5

-6

-1

-2

-3

DE698/DV10

G

COMPONENT VIDEO SELECTOR

CH1 IN2

3

CH1 IN3

5

CH2 IN2

9

CH2 IN3

11

CH3 IN2

14

CH3 IN3

12

VIDEO

SELECTOR

IC203

V1

13

V2

5

DVD

3

V3

9

NC

7

V1.IN

13

DVD

3

V2

5

NC

1

V3

9

IC304

SW1 SW2

COMP SW1 COMP SW2

SW2

10 6 14 2

SW2

6dB AMP

75Ω

SW1

D203,204

SW1

Y SWITCH

IC251

SW1

DRIVER

75Ω

DRIVER

75Ω

DRIVER

OR

6dB AMP

2 4

SW2

SW3

SW4

10 6 14 2

4

SW2

SW4

SW3

SW4

4

SW4

SW3

CHI OUT

CH2 OUT

CH3 OUT

SW5

V+1,+2

22

20

18

V-1,-2

6dB AMP

+5V-3

-5V-3

DRIVER

J301 (2/2)

75Ω

DRIVER

75Ω

DRIVER

75Ω

-7

-8

-9

Y

P

V1.OUT

M.OUT

V1.OUT

M.OUT

B/CB/

R/CR/

EXCEPT DE598: AEP,UK MODEL

MONITOR

B-Y

OUT

R-Y

VCC

+5V-3

15

1

VEE

-5V-3

VCC

+5V-3

15

1

VEE

-5V-3

COMPONENT

VIDEO

IC807

+5V-3

1 3

IC804

-5V-3

3 2

J200 (2/2)

VIDEO

J201 (2/2)

VIDEO

SW1 SW2

SW3

SW4

Y

C

IC253

SYNC

1 2

SEPARATION

+5V

REG

-5V

REG

-3

OUT

-2

OUT

J253 (2/2)

G

VIDEO 1

MONITOR

V SW1 V SW2

V SW3 V SW4 COMP SW1 COMP SW2

-1

S-VIDEO

OUT

Q250,251

+15V

-15V

RELAY

DRIVER

KEY/DISPLAY

D

SECTION

VIDEO 1

RY250

(Page 18)

Q327

STR-DE598/DE698/DV10

DE698

Y/C SEPARATION

IC370

YC IN

ADC

7 25

I2C

BUS

15 16

I LINE

MEMORY

SYSTEM

CLOCK

DYNAMIC

COMB

FILTER

PLL

COLOR

KILLER

US,CND MODEL

DAC

YOUT

COUT

FSC

Ver. 1.1

Y/C AMP

IC372

Y PROCESS

Q371

C PROCESS

27

19

Q373

1

8

4

5

J252 (2/2)

Y

-2

VIDEO 2

S-VIDEO

IN

C

• Signal path : VIDEO

• Abbreviation CND : Canadian model E2 : AC 120V area in E model AUS : Australian model AR : Argentina model

STR-DE598/DE698/DV10

C SWITCH

IC252

E

KEY/DISPLAY

SECTION

(Page 18)

V1.OUT

M.OUT

VCC

+5V-3

15

1

VEE

-5V-3

DV10

J251

Y

G

S-VIDEO

MONITOR

OUT

G

C

SW5

6dB AMP

75Ω

DRIVER

75Ω

DRIVER

G

V1

13

DVD

5

V2

3

NC

7

V3

9

SW3

SW4

SW1

D251,252

OR

SW2

10 6 14 2

4

SW3

SW2

SCL SDA

NTSC/PAL

US,CND,E2,

AR MODEL

AEP,UK,AUS

MODEL

X371

3.58MHz

X370

4.43MHz

CLOCK GENERATOR

IC371

13

3

1

NTSC/PAL

12

NTSC

PAL

13

10

AEP,UK,AUS MODEL

4

2

SWITCHING

12

IC373

3

17 17

STR-DE598/DE698/DV10

4-5. BLOCK DIAGRAM — KEY/DISPLAY SECTION —

VIDEO

SECTION

(Page 17)

VIDEO

SECTION

(Page 17)

D

COMP SW2 COMP SW1

E

NTSC/PAL

FLASH

PROGRAMMING

V SW1 V SW2 V SW3 V SW4

SDA

SCL

CNS504

1

2 7 6 5

EEPROM

IC1131

SDA

SCL

S131

I

/

I

FLASH1

FLASH2 MD2 MD0

RESET

SIRCS

FL DISPLAY DRIVER

IC100

STB

9

DIN

7

CLK

8

OUT

1

3

1

3

SEG1

I

SEG16

GRID12

I

GRID1

SW1 SW2 SW3 SW4

REMOTE CONTROL RECEIVER

IC102

RV101

-/+

RV102

MASTER VOLUME

14

I

29

31

I

42

1 2 3 4

DE698/DV10

FL101

VACUUM

FLUORESCENT

DISPLAY

D101-104

SW1

86

SW2

87

SW3

88

SW4

89

COMP SW2

65

COMP SW1

71

UPCON

33

UPCON CLK

34

NTSC/PAL SW

64

29

X1101 24MHz

5

6

X1

X0

30

SDA

29

SCL

30

56

POWER KEY

28

FLASH1

27

FLASH2 MD2

51

MD0

49

SYSTEM

CONTROL

IC1101 (3/4)

FL DATA

VOL ENC A VOL ENC B

BLUE LED

FL LAT

FL CLK

SIRCS

ENC A ENC B

57 59 60

54

31 32

45 46

47

9 4 2

LED DRIVE

Q110

BUFFER

IC101

8 6 3

D105

+3.3V

(STBY)

IC1111 RESET

A/D0

A/D1

A/D2

38

39

40

12

77

RSTX

SW NETWORK

S140-143,148-153

SW NETWORK

S120-125,128-130

SW NETWORK

S100-110

STR-DE598/DE698/DV10

1818

4-6. BLOCK DIAGRAM — POWER SECTION —

PRE DRIVER

IC701

IN 2

PRE

PRE DRIVER

PRE

PRE DRIVER

PRE

PRE DRIVER

PRE

D1110

DRIVE

IC601

DRIVE

IC501

DRIVE

IC2501

DRIVE

PROTECTOR

D721,722,732

Q722,723,725,793,795

HP-RY

FRONT-RY

REAR-RY

C/SB RY

HP DETECT

SB-RY

TUNER/

AUDIO

SECTION

(Page 15)

C

FL-CH

FR-CH

SL-CH

SR-CH R-CH

C-CH

SBL-CH

DE698/DV10

SBR-CH

PROTECTOR

SYSTEM

CONTROL

IC1101 (4/4)

BRIDGEABLE RY

R-CH

HP_RY

FRONT RY

REAR_RY

C/SB RY

HP DETECT

SP_B_RY

P0WER RY

STOP

61

62

66

69

68

55

67

72

58

48

8

1

6

1

D1107

D1108

IN 2

IN2

IN1

IN+

DRIVE

D1111

+VOUT2

-VOUT2

-B-1 +B

+VOUT2

-VOUT2

-B-1 +B

+VOUT2

-VOUT2

+VOUT1

-VOUT1

-B-1 +B

+VOUT

-VOUT

-B-1 +B

STR-DE598/DE698/DV10

Ver. 1.1

J791

PHONES

R-CH

TM600(DE698/DV10)

-20V

F1

F2

RELAY

SWITCH

RY901

D914

TM610(DE598)

TM601

TM501

DE698/DV10

TM502

R810

R811

R910

D804

L

FRONT B

R

L

FRONT A

R

L

SURROUND

R

CENTER

L

SURROUND

BACK

R

T901

POWER

TRANSFORMER

EXCEPT

E2 MODEL

T902

POWER

TRANSFORMER

D915

SPEAKERS

IMPEDANCE

USE 8-16Ω

• Signal path : TUNER (FM/AM)

• R-ch is omitted due to same as L-ch.

• Abbreviation CND: Canadian mode E2 : AC 120V area in E model

F901

F902

EXCEPT

E2 MODEL

JW905

~

AC IN

S901

VOLTAGE

SELECTOR

240V

220V

120V

DE698/DV10

J911

AC OUTLET

E2 MODEL

S901

-3

-2

-1

JW903

12 11

2 3

6 5

DETECT AMP

-B-1

IC691

OVERLOAD

POWER AMP

Q701-704

POWER AMP

Q651-654

POWER AMP

Q501-504

POWER AMP

Q533,534,571,572

POWER AMP

Q572,2573,2574

-B SWITCH Q691,692

72

CURRENT

DETECT

Q705,706

R-CH

CURRENT

DETECT

Q655,656

R-CH R-CH

R-CH

CURRENT

DETECT

Q505,506

CURRENT

DETECT

Q535,536

CURRENT

DETECT

Q2575,2576

+B

-B

-20V

TU+10V

TU+3.3V

+7V

-7V

+5V-2

+5V-1

+2.6V +3.3V

+3.3V

(STBY)

-32V REG

IC1904

+3.3V

REG

Q801

IC1071

+3.3V

REG

13

5 2

OVERLOAD

DETECT

D740,Q740

OVERLOAD

DETECT

D640,Q640

OVERLOAD

DETECT

D540,Q540

OVERLOAD

DETECT

D580,Q580

OVERLOAD

DETECT

D2575,Q2577

AEP,UK MODEL

IC1001

+5V

REG

IC1901

BACK-UP

SWITCH

R-CH

13

HP-RY

SB-RY

IC1902

+10V REG

IC801

+7V

REG

-7V

REG

IC802

IC1031

+5V

REG

4

RELAY

DRIVER

Q790

RELAY

DRIVER Q800(DE698/DV10) Q810(DE98)

RELAY

DRIVER

Q710

FRONT RY

REAR-RY

C/SB RY

HP DETECT

13

+15V

31

23

-15V

13

RELAY

DRIVER

Q610

RELAY

DRIVER

Q550

RECT D802

RY791

RY600

(DE698/DV10)

RY610

(DE598)

RY601

RY501

DE598

RELAY

DRIVER

Q760

RELAY

DRIVER

Q809

RY500

RY701

RELAY

DRIVER

R-CH

Q901

RY801(EXCEPT CND) RY802,803(CND)

RECT

D920-923

RECT

D805-808

RECT

D910-913

Q921

STR-DE598/DE698/DV10

19 19

STR-DE598/DE698/DV10

Ver. 1.1

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.)

for schematic diagram:

• All capacitors are in µF unless otherwise noted. (p: pF) 50 WV or less are not indicated except for electrolytics and tantalums.

• All resistors are in Ω and 1/ specified.

f

•

• 2 : nonflammable resistor.

• 5 : fusible resistor.

• C : panel designation.

• A : B+ Line.

• B : B– Line.

•Voltage and waveforms are dc with respect to ground

•Voltages are taken with a VOM (Input impedance 10 MΩ).

•Waveforms are taken with a oscilloscope.

• Circled numbers refer to waveforms.

• Signal path.

• Abbreviation

: internal component.

Note:

The components identified by mark 0 or dotted line with mark 0 are criti- cal for safety. Replace only with part number specified.

under no-signal (detuned) conditions. no mark : FM

Voltage variations may be noted due to normal production tolerances.

F : TUNER (FM/AM) L : VIDEO (AUDIO) I : VIDEO J : CD (ANALOG) c : CD (DIGITAL)

CND : Canadian model. E2 : AC 120 V area in E model. AUS : Australian model. AR : Argentina model. KR : Korean model. TW : Taiwan model.

4

W or less unless otherwise

Note:

Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.

for printed wiring boards:

• X : parts extracted from the component side.

f

•

• : Pattern from the side which enables seeing.

Caution: Pattern face side: Parts on the pattern face side seen from the (Side B) pattern face are indicated. Parts face side: Parts on the parts face side seen from the (Side A) parts face are indicated.

• Abbreviation

: internal component.

CND : Canadian model. E2 : AC 120 V area in E model. AUS : Australian model. AR : Argentina model. KR : Korean model. TW : Taiwan model.

C Q

B

E

Q

BCE

Q

B

C

These are omitted.

E

• Waveforms — DIGITAL Board —

1

IC1301 qd (CKOUT)

12.288MHz

1V/DIV, 50nsec/DIV

2

IC1301 qf (BCK)

3.07MHz

1V/DIV, 0.2µs/DIV

3

IC1301 wa (XOUT)

12.288MHz

1V/DIV, 50nsec/DIV

4

IC1501 9 (MCLK1)

13.9MHz

3.5Vp-p

4.8Vp-p

3.2Vp-p

1.8Vp-p

5

IC1501 qs (MCLK2)

13.9MHz

1V/DIV, 50nsec/DIV

6

IC1501 qf (SCKOUT)

12.288MHz

1V/DIV, 50nsec/DIV

7

IC1101 id (X1)

24MHz

1V/DIV, 50nsec/DIV

3.6Vp-p

3.5Vp-p

2Vp-p

— S-VIDEO UP CONVERT Board —

(STR-DE698 only)

1

IC371 1

2.6Vp-p

1V/DIV, 20nsec/DIV

2

IC371 3

1V/DIV, 20nsec/DIV

4.43MHz

3.58MHz

STR-DE598/DE698/DV10

1V/DIV, 50nsec/DIV

2020

4-7. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 14 for Circuit Boards Location.

STR-DE598/DE698/DV10

Ver. 1.1

A

B

C

D

E

F

G

(Page 32)

(DE698/DV10)

(Page 32)

(DE598)

(Page 25)

1

(DE61)

234567891011121314

TM601

JW460

JW450

D580

1

10

Q580

C762

JW459

CNP501

JW456

R429

R350

R585

CNP500

R587

R588

TP801

JW458

JW454

JW453

JW425

JW455

R428

C503

C581

C702

JW457

C554

JW506

DE698/DV10

JW414

JW415

R475

R476

JW451

C469

C468

C501

R501

JW508

Q571

C580

DE698/DV10

R451

R401

DE698:AEP,UK,AUS,AR MODEL

C459

C409

C495

R499

C553

R553

C565

D585

JW432

R586

R580

C570

C577

R574

CC51

CC01

JW439

JW440

JW410

C488

DE698/DV10

JW401

C471

C472

R340

R741

1

C741

R554

C566

R537

R523

R576

R570

R571

BC E

Q533

C464

WP100

JW409

JW

51

R561

2

JW429

Q536

R526

J400

6P

4P

JW428

VIO

H120

50

C497

JW442

C561

JWH121

R503

C531

R452

JW411

JW412

R474

C506

R575

CC52

JWH119

C490

C499

IC501

JW420

R535

Q572

CC59

R459

CC02

R402

JW436

AEP,UK,AUS MODEL

31

30

IC401

80

81

C485

JW320

58

R473

JW441

JW321

IC402

4

C507

C567

R562

R502

C504

C505

R505

R572

R534

Q501

WP02 WP03

Q535

C576

R531

BCE BCE BCE BCE BCE BCE BCEBCEBCEBCEBCE

Q534

1

14

JW431

C539

CC09

15

JW424

D540

C510

R530

R409

JW435

100

R480

JW318

JW418

Q540

R514

R454

CN720

DE598

JW430

JW315

C498

9

5

4

1

R557

CC54

JW314

C517

CC04

R404

EXCEPT US,CND,E2 MODEL

JW423

C481

JWH117

C496

JW317

DE698/ DV10

JW322

C540

C541

R546

R540

R513

Q503

C489

R555

R510

R511

C493

R516

J403J402

C403

R455

JW316

R370

R556

Q506

R573

C494

C492

C511

Q502

CC55

C486

R525

JW708

R517

R515

R405

CNP503

3

C483

JW636

CC05

JWH118

C484

C482

C491

JW637

C516

C742

1

JW701

D505

CC57

R522

R524

D740

R740

Q505

Q504

R457

15

C732

JW702

R521

JW434

JW311

JW312

R330

JW313

R310

R300

14

C705

R407

JW419

R320

C701

JW739

R703

JW703

Q701

C519

R701

CC07

C704

R747

R520

C807

C703

C458

R745

C444

R748

C710

CC58

IC701

R714

R704

R746

Q740

J404

R458

C408

R702

C706

C717

R456

CC08

R408

EXCEPT US,CND,E2 MODEL

H101

JW

123

C808

C707

C757

R752

C756

R754

R725

R717

R713

R710

R711

Q703

R406

CC56

IC801

IC802

32 1

D896

C751

C753

R753

R751

1

2

C754

JW626

JWB03

C740

C711

R716

Q702

R360

C755

JW503

R715

R744

C733

CC06

C655

Q706

15

R431

JW416

C651

14

C744

C716

R653

D705

C653

JW706

R723

R719

Q704

CC31

JW417

C810

JW707

JW507

R432

JW433

C811

CN505

R651

JW628

C720

R724

JWB02

JWB01

CC32

R802

IC601

JW630

R721

Q705

C445

13

R652

JW736

R722

Q560

C657

R733

R664

R433

C656

J401

CC33

R533

R532

C601

C607

JW735

R667

C660

R434

CC34

EXCEPT US,CND,E2 MODEL

R468

D560

R668

L651

C603

R695

C606

R603

R602

R601

1

2

C654

R654

2

1

H

W

J

R675

Q651

Q640

C666

Q653

CC35

CC36

R435

RY560

C691

R690

58

IC691

C605

JW614

C743

R743

JW615

JWH114

R676

R638

R673

C661

Q655

R666

R663

R665

R660

R661

Q652

R470

R436

14

R604

D610

R618

R693

JW582

R648

JW504

R469

RY601

C604

JW581

JW578

R640

C669

J309

L601

R696

C642

Q654

R694

JW612

R775

R677

D691

JW613

R773

R674

Q692

R691

R750

R671

D690

JW611

R758

D640

R634

C752

Q610

JW820

JWH116

JW755

JW610

R757

D665

Q656

C670

Q710

R631

R672

RY701

D710

C750

D750

C400

R731

C760

R669

RR11

R623

C640

JW774

R698

R692

R756

JW569

R764

JW818

JW752

Q750

R767

TP800

Q753

R755

Q691

R699

CC11

C766

JW771

CN808

R734

JW836

JW445

JW770

CC15

JWH122

C804

DE698/DV10

1

41

L701

R736

JW757

JW720

R656

R732

Q751

R763

R760

R761

Q752

JW722

R655

JW767

CN807

JWH113

JW817

JW816

WP04

R718

JW754

R766

R657

R765

JW801

D722

JW717

JW584

C761

JW620

Q754

JW751

JW716

Q755

C767

RR13

EXCEPT US,CND,E2

WP102

VIO

R768

JWH108

Q725

R780

R737

C722

Q722

D721

R794

R792

C680

D680

Q680

D765

RR12

MODEL

JW780

JW800

WP101

L751

JW813

C721

Q723

JW704

C791

Q795

R735

D732

R625

JW559

R772

R778

Q756

R769

R614

R771

Q603 Q604

JW781

JW782

JW815

JW822

R617

C770

R610

R611

JW753

Q793

JW438

C621

CC13

EXCEPT US,CND,E2

MODEL

C803

JW784

221

CN809

DE698/V10

JW821

4

11

CNP806

1

5

JW819

CNP911

CNP802

1

C681

R681

R680

C610

JW568

Q601

R613

R615

Q602

RR14

JW783

JW712

D804

JW558

JWH110

R791

JW715

JWH111

C620

1

CN915

5

R803

C611

CC17

JW711

C822

Q606

JW772

R910

D818

D802

Q801

D605

JW759

Q790

R624

JW788

RY801

JW750

JW789

C805

C806

JW749

CNP912

41

C831

JW760

C832

JW761

JW763

JW762

C802

B

D801

C

E

C809

R804

JW710

RY791

C619

R622

Q605

R616

R621

R620

JW602

JW601

EXCEPT CND MODEL

RY802

JW786

EXCEPT CND MODEL

JW787

JW785

CNP908

D808

D805

C830

R806

C801 JW713

1

JW714

RY803

R831

EXCEPT CND MODEL

R793

D791

CN792

R824

R830

Q809

D807

4

D806

CND MODEL

EXCEPT CND MODEL

CND MODEL

DE698/DV10

(Page 30)

(Page 38)

(Page 25)

(Page 38)

(DE698/DV10)

H

STR-DE598/DE698/DV10

RED

(Page 30)

(DE698/DV10)

(Page 30)

DE698/DV10

BRN

(Page 30)

• Semiconductor Location

Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D505 F-5

D540 F-4 D560 C-8 D580 F-2 D585 F-3 D605 F-12 D610 D-8 D640 F-9 D665 F-9 D680 F-10 D690 E-9 D691 E-9

D705 F-7 D710 D-9 D721 E-10 D722 E-10 D732 E-11 D740 F-5 D750 F-9 D765 F-10 D791 E-13 D801 E-13 D802 C-12 D804 E-12

D805 D-13 D806 D-13 D807 D-13 D808 D-13 D818 B-12 D896 D-6

IC401 D-4 IC402 E-4 IC501 F-3 IC601 E-7 IC691 E-8

IC701 E-6 IC801 D-6 IC802 D-6

Q501 F-4 Q502 G-5 Q503 G-4 Q504 G-5 Q505 F-5 Q506 F-5 Q533 G-3 Q534 G-4

(Page 32)

Ref. No. Location Q535 F-4

Q536 F-3 Q540 F-4 Q560 D-7 Q571 F-2 Q572 G-3 Q580 G-2 Q601 F-11 Q602 G-11 Q603 G-11 Q604 G-12 Q605 F-12

21 21

M

(DE698/DV10)

DE698/DV10

(Page 30)

Ref. No. Location Ref. No. Location Q606 F-12

Q610 D-9 Q640 F-8 Q651 F-8 Q652 G-8 Q653 G-8 Q654 G-9 Q655 F-8 Q656 F-9 Q680 F-10 Q691 E-10 Q692 E-9

Q701 F-6 Q702 G-6 Q703 G-6 Q704 G-7 Q705 F-7 Q706 F-7 Q710 D-9 Q722 E-11 Q723 E-11 Q725 E-10 Q740 F-6 Q750 F-9

(DE698/DV10)(DE598)

(Page 30)

(Page 25)

Ref. No. Location

Q751 F-10 Q752 G-10 Q753 G-9 Q754 G-10 Q755 F-10 Q756 F-11 Q790 E-12 Q793 E-11 Q795 E-11 Q801 E-12 Q809 D-13

(Page 30)

S

(Page 38)

JW791

CNP791

J791

C790

TP701

Sony STRDE-698 Service manual

TABLE OF CONTENTS

GENERAL

DISASSEMBLY

case

front panel section

back panel section

STANDBY board

SB AMP board

TEST MODE

DIAGRAMS