Sony SNC-UNIHB-1 Specsheet
SNC-UNIHB/1 & SNC-UNI
Security Camera Enclosures
Environmental Enclosures
The SNC-UNIHB/1 & SNC-UNI are indoor/outdoor,
environmental housings that can accommodate:
Network cameras accepted
SNC-CH120/140/220/240, SNC-ZB550, and SNC-EB520.
Analog cameras accepted
SSC-FB530/560, SSC-G113A/213A and SSG-G103A/203A.
A heater/blower is included with the SNC-UNIHB/1
model. The housing also includes a wall mount bracket
that can be used in pole mount applications.
KEY FEATURES
• Side hinges for ease of access when focusing and adjusting the camera.
• Accepts a variety of network (SNC-CH120/140/220/240, SNC-ZB550, SNC-EB520, and analog
(SSC-FB530/560, SSC-G113A/213A, SG-G103A/203A) cameras.
• Built-in thermostatically controlled 24VAC heater/blower on SNC-UNIHB/1 model.
• Lightweight extruded aluminum housing.
• High-strength steel wall/pole mount bracket included. Designed for mounting to a
flat wall or round pole, larger than 3.5-inches in diameter.
• Tamper-resistant screws included to lock down the housing top.
• Accommodates maximum camera/lens combination length of 9.5”.
IR Illuminator
(Images 1)
BID SPECIFICATIONS
• The SNC-UNIHB/1 & SNC-UNI environmental housings shall be constructed from two extruded aluminum (.080-inch wall
thickness, white finish) halves and two injection molded polycarbonate end caps. A clear polycarbonate viewing window
shall be ultrasonically welded to the inside of the front end cap, creating a watertight seal. The top of the housing shall be
hinged from the side to allow accessibility to the camera by one screw in each end cap. Camera adjustment or removal
shall be provided via one screw located in the key hole slot on the aluminum camera sled. A 25 VA heater is mounted to
the inside of the bottom extrusion, directly behind the viewing window, for defogging and deicing on the SNC-UNIHB/1
model. Four vent plugs (2 in front, 2 in rear) will create a positive airflow (front to rear) when the blower is in use
(SNC-UNIHB/1 model). Two watertight strain relief plugs will be located at the rear of the housing for separate
communication wiring and power cable entry. With an ingress protection rating of 54.
SPECIFICATIONS
Environmental (SNC-UNIHB/1 only)
Operating temperature -20°F to 120°F
Heater activates at 50°F (+/-8°), deactivates at 80°F (+/-5°)
Blower activates at 110°F (+/-7°), deactivates at 80°F (+/-6°)
Operating humidity Up to 100%
Models
SNC-UNI 13-inch Indoor/Outdoor aluminum housing with clear window and hinged opening, for Sony’s
SNC-UNIHB/1 13-inch Indoor/Outdoor aluminum housing with clear window and hinged opening, 24VAC heater and blower, for
Electrical
SNC-UNI See camera instructions
SNC-UNIHB/1 24VAC, 50/60 Hz 25 vA, 1.04 Amps for heater & blower, See camera specifications for camera power requirements
Shipping Weight Shipping box dimensions
SNC-UNI 7 lbs. (3 kg) 17 x 5 x 6 inches (432 x 127 x 152mm)
SNC-UNIHB/1 8 lbs. (4 kg) 17 x 5 x 6 inches (432 x 127 x 152mm)
SNC-CH120/CH140/CH220/CH240, & CS50W cameras
Sony’s SNC-CH120/CH140/CH220/CH240 cameras
SNC-UNIHB/1 & SNC-UNI
SYSTEM CONFIGURATIONS
SNC-UNI
Network
SNC-UNIHB/1
HD monitor
Recording Server
NSR-1000 Series
Recording Software
IMZ-NS100 Series
PC
DIMENSIONS
4.42
)112(
2.40
4.00
)102(
.74
Unit: inches (mm)
5.67
)144(
2.60
)66(
)61(
2.03
)52(
)19(
15.25
)387(
13.40
)34 0(
15.90
3.00
)76(
3.50
)89(
4.53
)115(
10.59
)269(
)404(
2.44
)62(
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/security
UNIHB/UNI
2.00
)51(
2.10
)53(
8.60
)218(
© 2012 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
Weights and measurements are approximate.
Sony and the Sony make.believe logo are trademarks of Sony.
Printed in USA (05/12)
Loading...